Menu

Battlefield 4

 
 
      The Battlefield 4 Gamepack for Titan One has 40 distinct MODS grouped into 13 classes. This Gamepack allows you to make up to 16,920,576 combinations of MODS.
 
Instructions for Battlefield 4 Gamepack
Compatible Titan One firmware: 1.31+
Compatible Controllers: Dualshock 4, Dualshock 3, XBox One, XBox 360, Wii U Pro
Compatible Systems: Playstation 4, XBox One, Playstation 3, XBox 360
 

  Gamepack Operation

Quick Enable/Disable MODS:
 
Player LED 1: Controller in regular mode, all MODS are disabled (Blue on DS4).
Player LED 4: MODS are enabled (Purple on DS4).
 

  Gamepack Configuration

To enter in menu mode:
 
PS3: Hold SELECT+START for 2 seconds to enter in menu mode.
PS4: Hold SHARE+OPTIONS for 2 seconds to enter in menu mode.
XBOX 360: Hold BACK+START for 2 seconds to enter in menu mode.
XBOX ONE: Hold VIEW+MENU for 2 seconds to enter in menu mode.
Important: Always keep the SELECT/SHARE/BACK/VIEW button pressed while in Menu mode. To exit the menu mode, release the SELECT/SHARE/BACK/VIEW button.
 
Player LED 4 will blink the number of current Class (DS4 will flash purple).
Player LED 3 will blink the number of active MOD for current Class (DS4 will flash green).
If the Player LED 3 is not blinking means no MOD is selected for the current Class, see below how to navigate between Classes and MODS.
 
Dualshock 3 Users: Some Bluetooth dongle are not compatible with Titan One Gamepack LED blinking, causing all LEDs be off or have inconsistent blinking. The solution is try another Bluetooth dongle or use the USB cable to configure the Gamepack.
 
To navigate between Classes:
Goes UP
Goes DOWN
 
To navigate between MODS within current Class:
Goes UP
Goes DOWN
 
Adjustable MODS (Rapid Fire and Quick Scope):
Increases
Rate of Fire
or Timing
Decreases
Rate of Fire
or Timing
Test current
Rate of Fire
or Timing
 

  Gamepack Classes and MODS

1
Class 1
Rapid Fire
When rapid fire is enabled, you can turn virtually any semi automatic weapon into a fully automatic weapon. This creates a very unique advantage for players using semi automatic weapons in Battlefield games. While rapid fire will not usually make a fully automatic gun shoot any faster, it can have positive side effects on fully automatic guns such as reducing recoil, helping players conserve ammunition and achieve more headshots.
 
MOD
Name
Description
1
Optimized Rapid Fire
This rapid fire is optimized to be as fast as possible but at the same time ensure that every single shot will be correctly registered by the game.
2
Rapid Fire
Adjustable
With adjustable rapid fire you can always get the optimum firepower for your favorite weapon. See the menu system instructions above for more information on how to adjust your rapid fire speed in this mode.
3
Pulse Rapid Fire
Adjustable
Pulse rapid fire can reach a faster rate of fire with burst type weapons (i.e. M16)


 

2
Class 2
Burst Fire
Burst firing is designed to turn semi automatic and automatic weapons into burst firing weapons. When this feature is enabled, your weapon will fire in bursts similar to the M16 and can be used with 1, 2, 3, 4, 5, or 6 round bursts. Burst firing can help reduce recoil and conserve ammunition. Combining burst fire with adjustable rapid fire will give you automatic burst fire. This will allow you to select how many rounds are fired per burst and the amount of time between bursts for a truly customizable experience.
 
MOD
Name
1
1 Round per Burst
2
2 Round per Burst
3
3 Round per Burst
4
4 Round per Burst
5
5 Round per Burst
6
6 Round per Burst



3
Class 3
Fire Mode
Fire mode determines an assist action to be used together with rapid fire and/or burst fire. These are normally applied to the triggers.
 
MOD
Name
Description
1
Scope Disable
The scope (ADS) disables rapid fire and burst fire.
2
Scope Enable
The scope (ADS) enables rapid fire and bust fire.
3
Press Sensitivity
Rapid fire and burst fire will only be activated by fully pressing the fire button.


 

4
Class 4
Shot Mode
Assign an action to be performed automatically when you press the fire button.
 
MOD
Name
Description
1
Drop Shot
Scope Disable
When you pull the fire button, your character will drop to prone position and begin firing. This is useful for players that like to maintain stealth and reduce their target profile. This also assists in increasing accuracy in combat. This action is not performed if the scope (ADS) is in use.
2
Drop Shot
Press Sensitivity
This performs the same action as drop shot but is only activated when you FULLY press the fire button.
3
Jump Shot
Scope Disable
When you press the fire button your character will immediately jump and begin firing. This action is not performed if the scope (ADS) is in use.
4
Jump Shot
Press Sensitivity
Performs the same action as jump shot but is only activated when you FULLY press the fire button.
5
Side Shot
Scope Disable
When you press the fire button, your character will begin to make side movements and begin firing, confusing the enemy in the process. This action is not performed if the scope (ADS) is in use.
6
Side Shot
Press Sensitivity
Performs the same action as side shot but is only activated when you FULLY press the fire button.
7
Scope Shot
Scope Disable
When you pull the fire button, your character will automatically use the scope (ADS). This is useful for single shot weapons, decreasing the spread effect and increasing accuracy in combat. This action is not performed if the scope (ADS) is in use.


 

5
Class 5
Scope Mode
Scope modes are MODS that are associated with using the scope (ADS).
 
MOD
Name
Description
1
Quick Scope
Timing Adjustable
The idea behind quick scope is to use a sniper rifle, scope IN and fire the shot as the gun scopes in. Perfecting the aiming and timing will allow you to become a one-man commando with your sniper rifle. To fire a quick scope shot, quickly TAP your scope button. The MOD will automatically scope in, take a shot, and scope out. Check the menu system instructions above for more information on how to adjust the timing in this mode.
2
Aim Helper
Campaign
Aim helper will focus on the nearest target when used in campaign mode.


 

6
Class 6
Hold Breath
This mode is specially designed for sniper rifles. It automatically holds the sniper's breath when scoping in. Upon activation. the MOD will hold the sniper's breath when scoping. The player no longer has to push the left thumbstick to hold breath. NOTE: Hold Breath MOD CAN be used with Easy Sprint and/or Quick Scope simultaneously.
 
MOD
Name
Description
1
Fully Auto
Hold breath at the same time you press the scope (ADS) button.
2
Press Sensitivity
Hold breath is only active if the scope (ADS) button is FULLY pressed.


 

7
Class 7
Auto Spot
Automatically spot your opponents from across the battlefield. With Auto Spot active your character will mark where your opponents are located simply by looking in their general direction. A ridiculous advantage in team matches.
 
MOD
Name
Description
0
OFF
Auto Spot disabled.
1
Always Enabled
Auto Spot enabled.
2
Scope Enable
Auto Spot is activated only when Scope button is pressed.


 

8
Class 8
Easy Sprint
If you are tired of constantly pressing the left thumbstick to make your character sprint, Easy Sprint is just what you have been looking for. NOTE: Easy Sprint MOD CAN be used with Sniper Breath and Quick Scope simultaneously.
 
MOD
Name
Description
1
Fully Auto
Your character will sprint at the same time you begin to move him forward.
2
Press Sensitivity
Your character will sprint if the thumbstick is FULL pressed forward. The character will walk regular speed if the thumbstick is only slightly pressed forward.


 

9
Class 9
Accelerometer Aim Assist
With accelerometer aim assist, you can use the Six Axis PS3 controller to aim while scoping. This means you can move the controller to adjust the target position when scoped in. This MOD will not affect aiming with the right stick. It will only add an additional option to aim with. Each of the modes will add sensitivity with mode 1 being the least sensitive and mode 5 being the most sensitive.
 
MOD
Name
1
Sensitivity 1
2
Sensitivity 2
3
Sensitivity 3
4
Sensitivity 4
5
Sensitivity 5



10
Class 10
Button Layout
Most users play their favorite Battlefield games using the default button layout but a lot of players do use optional button layout and switch their thumbstick positions. With the Button Layouts you can make any of the MODS on the Titan One work with your favorite button layout.
 
MOD
Name
0
Default
1
Veteran
2
Lefty
3
Lefty Veteran



11
Class 11
Button Swap
This unique feature allows you to setup special remapping to best adjust the controller to your personal taste.
 
MOD
Name
Description
1
Bumpers <> Triggers
Swap the bumper and triggers to convert your controller to Xbox 360 to PS3 style or vice versa.
2
Analogs
Swap the analog thumbsticks. For left handed gamers.
3
Bumpers <> Triggers
AND Analogs
Combines both swaps above.


 

12
Class 12
Bunny Hop
This MOD allows the player to automatically jump repeatedly in order to move faster, instead of just running. Moving in a zigzag pattern while bunny hopping is the fastest way to move around, making the player an even more difficult target.
 
MOD
Name
Description
0
Bunny Hop: OFF
Disable Bunny Hop
1
Bunny Hop: ON
Press and hold the JUMP button to start bunny hopping. You can also lock the Bunny Hop MOD by pressing the SPRINT button once, this allows you to not have to hold the JUMP button and freely maneuver both thumbsticks, to stop bunny hopping release the movement sticker.


 

13
Class 13
Auto Switch Flashlight (Laser Sight)
This MOD automatically switch the weapon flashlight (or laser sight) as you  fire or raise the ADS (scope).
 
MOD
Name
Description
0
OFF
Auto switch disabled.
1
Fire Auto Switch
Automatically switch on the flashlight (laser sight) when start firing, and switch it off when stop firing.
2
Scope Auto Switch
Same above, but for ADS (scope).


 

  Combining MOD Classes

The Battlefield Gamepack allows you choose and combine one MOD from each Class, being possible to have a total of 12 active MODS at the SAME TIME. This means you can make combinations such Burst Fire added to Rapid Fire, resulting in an exclusive "Automatic Burst Fire" MOD. The Automatic Burst Fire can be optimized by adjusting the number of bullets fired per burst as well as the time between bursts. For additional optimization, you can add the "Scope Enable" MOD, which will make the Automatic Burst Fire be activated only when the ADS scope is in use.
 
Examples of Combinations:
 
Sniper Optimized
 
 
Optimized
Rapid Fire
Scope Disable
Hold Breath Press Sensitivity
Quick Scope
Auto Spot
Bunny Hop
 
Full Automatic Assault
 
 
3 Rounds Burst Fire
Adjustable
Rapid Fire
Scope Enable
Drop Shot Press Sensitivity
Auto Spot
Auto Switch Laser Sight
 
PLEASE NOTE: These are only examples, you do NOT have to use the combinations in this manner. You can experiment and use whatever combinations suit your playing style best. The possibilities are endless and with the exclusive "Press Sensitivity" feature, you can assign two different MODS to one single button for combinations like:
 
With this combination, you can activate Rapid Fire by partially pressing the fire button and drop shot by fully pressing the fire button.
Adjustable Pulse Rapid Fire
Drop Shot Press Sensitivity
 

  Quick Reference: Classes and MODS

01: RAPID FIRE
02: BURST FIRE
03: FIRE MODE
01: Optimized Rapid Fire
02: Adjustable Rapid Fire
03: Adjustable Pulse Rapid Fire
 
01: 1 Bullets per Burst
02: 2 Bullets per Burst
03: 3 Bullets per Burst
04: 4 Bullets per Burst
05: 5 Bullets per Burst
06: 6 Bullets per Burst
 
01: Scope Disable
02: Scope Enable
03: Press Sensitivity
 
04: SHOT MODE
05: SCOPE MODE
06: HOLD BREATH
01: Drop Shot: Scope Disable
02: Drop Shot: Press Sensitivity
03: Jump Shot: Scope Disable
04: Jump Shot: Press Sensitivity
05: Side Shot: Scope Disable
06: Side Shot: Press Sensitivity
07: Scope Shot: Scope Disable
 
01: Quick Scope (Adjustable)
02: Aim Helper (Campain)
 
Quick Scope Activation: Quick TAP on
scope button.
 
01: Fully Auto
02: Press Sensitivity
 
07: AUTO SPOT
08: EASY SPRINT
09: ACCEL AIM ASSIST
00: OFF
01: Always ON
02: Scope Enable
 
Battlefield 4 Optimized
 
01: Fully Auto
02: Press Sensitivity
 
01: Sensitivity 1
02: Sensitivity 2
03: Sensitivity 3
04: Sensitivity 4
05: Sensitivity 5
 
10: BUTTON LAYOUT
11: BUTTON SWAP
12: BUNNY HOP
00: Default
01: Veteran
02: Lefty
03: Lefty Veteran
 
 
01: Bumpers <> Triggers
02: Analogs
03: Bumpers <> Triggers + Analogs
 
00: OFF
01: ON (Sprint Button locks)
 
13: AUTO SWITCH FLASH/LS
 
 
00: OFF
01: Fire Auto Switch
02: Scope Auto Switch