[GCV/GPC] Apex Legends CV Anti-Recoil
Re: [GCV/GPC] Apex Legends CV Anti-Recoil
Hello.
I have a question about the "apex_antirecoil_M" script code.
I can turn off recoil only when I move the horizontal axis of the right stick.
Can I write this code here?
https://imgur.com/gallery/M8KCVQu
I want to remove the noise from the stick.
Where should I write this code?
I have a question about the "apex_antirecoil_M" script code.
I can turn off recoil only when I move the horizontal axis of the right stick.
Can I write this code here?
https://imgur.com/gallery/M8KCVQu
- Code: Select all
if (check_active(STICK_1_X,0)) combo_stop(a);
I want to remove the noise from the stick.
Where should I write this code?
- Code: Select all
#define StickNoise 10.0
main {
if(abs(get_actual(STICK_1_X)) < StickNoise) { set_val(STICK_1_X, 0.0); }
if(abs(get_actual(STICK_1_Y)) < StickNoise) { set_val(STICK_1_Y, 0.0); }
if(abs(get_actual(STICK_2_X)) < StickNoise) { set_val(STICK_2_X, 0.0); }
if(abs(get_actual(STICK_2_Y)) < StickNoise) { set_val(STICK_2_Y, 0.0); }}
-
powerPRO09 - Private First Class
- Posts: 2
- Joined: Mon Jul 05, 2021 6:49 am
Re: [GCV/GPC] Apex Legends CV Anti-Recoil
Hello
I’m trying to get Apex Legends CV to work properly on PC for controller/xim. I’m finding it near impossible to tune the antirecoil anywhere near as good as I can on console, it almost feels like the script timing or in game mechanics or something isn’t lining up with the recoil.
Basically I tuned my AR values on both xbox and PlayStation consoles with relative ease. Same 6-6 classic on PC. But something seems wrong on PC. I’ve tried both xbox one and ps4 controllers, with and without xim, I’ve also tried different polling rates, capping my fps to 120, as well as screen capture and capture card. I started at 0.0 vscale and hscale and went up decimals of .1 and went all the way up until they were obviously over correcting. I’m also certain all in game settings are the same.
I have spent many hours and I’m not sure what is wrong but I’ve tried everything I can think of
I’m trying to get Apex Legends CV to work properly on PC for controller/xim. I’m finding it near impossible to tune the antirecoil anywhere near as good as I can on console, it almost feels like the script timing or in game mechanics or something isn’t lining up with the recoil.
Basically I tuned my AR values on both xbox and PlayStation consoles with relative ease. Same 6-6 classic on PC. But something seems wrong on PC. I’ve tried both xbox one and ps4 controllers, with and without xim, I’ve also tried different polling rates, capping my fps to 120, as well as screen capture and capture card. I started at 0.0 vscale and hscale and went up decimals of .1 and went all the way up until they were obviously over correcting. I’m also certain all in game settings are the same.
I have spent many hours and I’m not sure what is wrong but I’ve tried everything I can think of
-
Free tshirts - Private First Class
- Posts: 3
- Joined: Wed Sep 08, 2021 3:29 pm
Re: [GCV/GPC] Apex Legends CV Anti-Recoil
jas0n wrote:User Michael released an update on Apex CV that added support for resolutions 1728*1080 and 3440*1440. However, the max frame resolution is 1920x1080p? Is it possible to set it higher to support 3440x1440?
Does anyone have any input on this? Thanks
- toggletom
- Staff Sergeant
- Posts: 12
- Joined: Wed Aug 11, 2021 11:54 pm
Re: [GCV/GPC] Apex Legends CV Anti-Recoil
Does anyone know how to solve the following issue with the Apex Legends CV Anti-Recoil script?
By googling it i only get one result which is from this forum, the person said he solved it by correctly saving this GCV script. I dont think i did an error in that regard, but i cannot fully rule it out either.
Error:
By googling it i only get one result which is from this forum, the person said he solved it by correctly saving this GCV script. I dont think i did an error in that regard, but i cannot fully rule it out either.
Error:
GCV Error: 'NoneType' object has no attribute 'size' GCV Error: Exception ignored in:
Traceback (most recent call last): File "", line 23, in __del__
GCV Error: File "C:\Users\PangYa\Documents\Titan 2 Scripts\test.py", line 781, in __del__ del self.idx
AttributeError: idx
Computer Vision: ERROR: Gpython process exited with error code 114
-
PangYa - Sergeant First Class
- Posts: 23
- Joined: Thu Dec 10, 2020 4:25 am
Re: [GCV/GPC] Apex Legends CV Anti-Recoil
Question to those using the CV Anti-Recoil:
Are your downwards mouse movements amplified while shooting in ADS mode? If not, how did you solve that?
Are your downwards mouse movements amplified while shooting in ADS mode? If not, how did you solve that?
-
PangYa - Sergeant First Class
- Posts: 23
- Joined: Thu Dec 10, 2020 4:25 am
Re: [GCV/GPC] Apex Legends CV Anti-Recoil
Anyone else get a weird yank left on the crosshair Halfway through the mag with the Rampage?
-
Krakkon - Sergeant First Class
- Posts: 24
- Joined: Wed Mar 20, 2019 5:27 am
Re: [GCV/GPC] Apex Legends CV Anti-Recoil
Please tell me how to write a code such as "Enter this key (F1 or F2 ...) for this weapon".
I'm thinking of using Titan2 + reasnow.
I'm thinking of using Titan2 + reasnow.
-
sterachan - Private First Class
- Posts: 3
- Joined: Wed Sep 22, 2021 12:50 am
Re: [GCV/GPC] Apex Legends CV Anti-Recoil
Yea the new rampage recoil is off.
-
residualflash - Master Sergeant
- Posts: 39
- Joined: Fri Apr 05, 2019 8:37 pm
Re: [GCV/GPC] Apex Legends CV Anti-Recoil
Will this be updated for the new season?
-
tuneup21 - Private
- Posts: 1
- Joined: Sat Nov 06, 2021 10:17 pm
Re: [GCV/GPC] Apex Legends CV Anti-Recoil
tuneup21 wrote:Will this be updated for the new season?
I'm hoping J2Kbr is working on the updates for the Car which will need both colors of ammo(Heavy and Light) added to it, the TripleTake back to energy instead of crate drop. The new purple hop up as well. What say you J2, you working on it?
-
rc419 - Sergeant Major
- Posts: 95
- Joined: Thu Jun 28, 2018 6:04 pm
Return to Gtuner Computer Vision
Who is online
Users browsing this forum: No registered users and 49 guests