[GCV/GPC] Apex Legends CV Anti-Recoil

GCV scripting for Gtuner IV and Titan Two. Configuration, examples, questions.

Re: [GCV/GPC] Apex Legends CV Anti-Recoil

Postby Benj91 » Fri May 08, 2020 9:11 am

@J2KBR

thanks for all the help, I cropped it down & it kinda flickers like it wants to detect a weapon but doesn't, I cant seem to change the aspect ratio of the shareplay either, if I leave it as it without going fullscreen it shows the video no problem, if I then go full screen then cycle back to GT it wont detect the window anymore, its dead odd.

I missed out on a avermedia capture card on amazon, but sourced another one so ill just hold out until that arrives to get everything working correctly

I went for the GC311 in the end, are they easy to set up?

thanks again :smile0517:
User avatar
Benj91
Staff Sergeant
Staff Sergeant
 
Posts: 11
Joined: Thu Apr 30, 2020 8:40 pm

Re: [GCV/GPC] Apex Legends CV Anti-Recoil

Postby J2Kbr » Fri May 08, 2020 9:18 am

The capture card is the easiest and best way to use Gtuner's computer vision interface. I have a GC311 and works flawlessly, it does not requires any drivers, just plug to your computer and it should available to use on Gtuner IV. :smile0517:
ConsoleTuner Support Team
User avatar
J2Kbr
General of the Army
General of the Army
 
Posts: 20323
Joined: Tue Mar 18, 2014 1:39 pm

Re: [GCV/GPC] Apex Legends CV Anti-Recoil

Postby SnaKe » Fri May 08, 2020 12:32 pm

J2Kbr wrote:
SnaKe wrote:How do I get it to capture a secondary monitor so?

For that a second monitor is needed to be plugged to your laptop.

Then you can select the monitor in the Video Input Configuration:
asdasdasd.png


Thanks, so I have got the monitors connected now.
But still can't continue.

However, I have issues how to keep control over my XIM and T2.
Because when I have to use remote control of PS4, I have to connect a seperate PS4 controller (which isn't connected with the XIM and T2 so)

Also, opening remote control on my display, makes the game all blurry and it looks like it misses a lot of frames or something.

I have bought a cable from (VGA to HDMI) and wired VGA (from my PS4 monitor) to HDMI on my laptop.
(Monitor only has one HDMI input which the PS4 is connected to)

I am so eager to get this all working but the struggles and not having the knowledge what to do or such things really upset me.

Any tips from any PS4/XIM user who managed to get this working?
User avatar
SnaKe
Staff Sergeant
Staff Sergeant
 
Posts: 10
Joined: Sun Oct 06, 2019 7:58 pm

Re: [GCV/GPC] Apex Legends CV Anti-Recoil

Postby GGsUK » Fri May 08, 2020 1:31 pm

As far as I know, this script doesn’t work too well with XIM yet. Can’t really strafe and hip fire, as it’s very stiff.
But they’re working on it. Maybe try raw mouse input into Titan like they’ve been talking about?
I’m personally gonna wait, but it’s an option
User avatar
GGsUK
First Sergeant
First Sergeant
 
Posts: 52
Joined: Wed Nov 20, 2019 5:50 pm

Re: [GCV/GPC] Apex Legends CV Anti-Recoil

Postby DontAtMe » Fri May 08, 2020 4:35 pm

RobEngle93 wrote:Maybe try raw mouse input into Titan like they’ve been talking about?


This is actually the best option,
Although support for controllers/xim was also added, Keep in mind the GVS script was made specifically for the titan two's raw mouse input that utilizes the Mouse MXY Input Translator.
User avatar
DontAtMe
Captain
Captain
 
Posts: 502
Joined: Tue Oct 02, 2018 4:49 am

Re: [GCV/GPC] Apex Legends CV Anti-Recoil

Postby GGsUK » Fri May 08, 2020 10:23 pm

DontAtMe wrote:
RobEngle93 wrote:Maybe try raw mouse input into Titan like they’ve been talking about?


This is actually the best option,
Although support for controllers/xim was also added, Keep in mind the GVS script was made specifically for the titan two's raw mouse input that utilizes the Mouse MXY Input Translator.


They’re still working on fixing the issues with XIM, correct?
I’ve never gotten raw input to feel as smooth as XIM.
User avatar
GGsUK
First Sergeant
First Sergeant
 
Posts: 52
Joined: Wed Nov 20, 2019 5:50 pm

Re: [GCV/GPC] Apex Legends CV Anti-Recoil

Postby GGsUK » Sat May 09, 2020 7:27 pm

Hey all,
Im trying to run the setup that was discussed with gjin, as mouse>Titan port A>Xim>Console

Ive taken the script J2Kbr dropped, tried saving and running it as both gpc and git files, and cant get any mouse passthru whatsoever.

Output is switched to HID with joystick disabled.

What am i doing wrong here?
User avatar
GGsUK
First Sergeant
First Sergeant
 
Posts: 52
Joined: Wed Nov 20, 2019 5:50 pm

Re: [GCV/GPC] Apex Legends CV Anti-Recoil

Postby Benj91 » Thu May 14, 2020 4:20 pm

@ J2KBR

My GC311 arrived today, as you said plugged it in & works flawlessly. thankyou!!

ive noticed with certain weapons, it detects the barrel wrong? more so the 99 & 301, with no barrel it detects them both as being gold … would this be due to weapon skins?

what are the best scopes to use with the script or will their be an update for the scopes detected also? ive noticed certain scopes are more hinderance then help


thanks again, keep up the good work!
User avatar
Benj91
Staff Sergeant
Staff Sergeant
 
Posts: 11
Joined: Thu Apr 30, 2020 8:40 pm

Re: [GCV/GPC] Apex Legends CV Anti-Recoil

Postby Shthappensbro » Thu May 14, 2020 7:58 pm

hmm with the new update u posted my rapid fire doesnt work with the p2020 so far anyone else got this problem??
User avatar
Shthappensbro
Major
Major
 
Posts: 754
Joined: Wed Aug 16, 2017 4:55 pm

Re: [GCV/GPC] Apex Legends CV Anti-Recoil

Postby Benj91 » Thu May 14, 2020 8:39 pm

Also, what does changing the GLOBAL_HSCALE / GLOBAL_VSCALE figures do in terms of ingame adjustments?
User avatar
Benj91
Staff Sergeant
Staff Sergeant
 
Posts: 11
Joined: Thu Apr 30, 2020 8:40 pm

PreviousNext

Return to Gtuner Computer Vision

Who is online

Users browsing this forum: No registered users and 74 guests