[GCV/GPC] Apex Legends CV Anti-Recoil
Re: [GCV/GPC] Apex Legends CV Anti-Recoil
Mad wrote:Fladinus wrote:AR is making the ability to move my vision up very difficult, and looking down is faster than what I want. I'm assuming it's from the AR and I didn't see any compensation for that. Only words about SAB OOF and other words I'm not familiar with.
Try this script: https://www.consoletuner.com/greslib/?w1130Dimakra666 wrote:What is best with the cv. Is it the m-apex script or the v1. 3 or just the game pack? Thnx in advance
They both do the same thing, it's just about what other mods you prefer. The universal gamepack also has apex CV: https://www.consoletuner.com/greslib/?w925
Cool but i cant see an option in the universal script for cv like the game pack.
Should i just have the cv script running along side with the universal game pack?
-
Dimakra666 - Sergeant Major of the Army
- Posts: 231
- Joined: Fri Feb 17, 2017 3:34 am
Re: [GCV/GPC] Apex Legends CV Anti-Recoil
Dimakra666 wrote:Should i just have the cv script running along side with the universal game pack?
Select "Computer Vision (Apex Legends)" from the anti recoil options. It'll start the apex cv script each time you load the gamepack when that option is selected.
ConsoleTuner Support Team || ConsoleTuner Discord || InputSense Discord
- Mad
- Major General
- Posts: 4536
- Joined: Wed May 22, 2019 5:39 am
Re: [GCV/GPC] Apex Legends CV Anti-Recoil
Let me ask you a question about Titan CV. Previously, both numbers were stable at 2.0, but suddenly the CV became unstable on the 15th. So I changed the number myself, but now it is 1.09. It has been replaced by about half the number. .. Also, when using the 3x scope and the 1x scope, the 3x will fly straight, but the 1x will shift upward. If you adjust the value to 1x, 3x will shift downward and you will not be able to recoil. What should I do? ??
I looked at zoom, but it was the above value.
For some reason, the recoil of 1x and 3x is different, and if you match either one, one will not fly straight ...
I looked at zoom, but it was the above value.
For some reason, the recoil of 1x and 3x is different, and if you match either one, one will not fly straight ...
-
zaraki1120 - Staff Sergeant
- Posts: 11
- Joined: Sat Oct 31, 2020 8:13 am
Re: [GCV/GPC] Apex Legends CV Anti-Recoil
zaraki1120 wrote:Let me ask you a question about Titan CV. Previously, both numbers were stable at 2.0, but suddenly the CV became unstable on the 15th. So I changed the number myself, but now it is 1.09. It has been replaced by about half the number. .. Also, when using the 3x scope and the 1x scope, the 3x will fly straight, but the 1x will shift upward. If you adjust the value to 1x, 3x will shift downward and you will not be able to recoil. What should I do? ??
I looked at zoom, but it was the above value.
For some reason, the recoil of 1x and 3x is different, and if you match either one, one will not fly straight ...
U just need to change the value for scopes
First make sure u have updated to the latest version of the script.
-
Dimakra666 - Sergeant Major of the Army
- Posts: 231
- Joined: Fri Feb 17, 2017 3:34 am
Re: [GCV/GPC] Apex Legends CV Anti-Recoil
Hey there,
i dont know if i play with the correct values for the gcv script, and i like some opinions about it.
hardware - xim apex > t2 > PC
software - Gtuner IV 1.8 with J2Kbr's CV Apex Legends Anti-Recoil modified by Michael.
LOOK SENSITIVITY (ADS) Insane (8)
GLOBAL_HSCALE = 2.21
GLOBAL_VSCALE = 2.21
DATA_SET = 1
DEADZONE_SIZE = 0
My ingame settings for Apex Legends are ALC settings, so i dont use dedicated sensitivity like 7 or 8
i guess its 8 because all my YAW speeds are set to MAX. Also i have 0 deadzone in my ALC settings, so i guess
i put in 0 deadzone in the GVC script??
can somebody explain me what this GLOBAL_HSCALE/VSCALE is. i changed it from default 2.1 to 2.21. This was normally set to 1.0 for both scalings in previous versions of the GCV script. why is this changed to 2.1?
the anti recoil barrel scaling i left to default on the script, but have set all 4 Optics Scalings to 1.00 and i set my optics in game to personal preference.
1x Optic/Iron Sight, 1.5
2x 1.9
3x 2.9
4x 2.4
6/10 2.6
i dont know if i play with the correct values for the gcv script, and i like some opinions about it.
hardware - xim apex > t2 > PC
software - Gtuner IV 1.8 with J2Kbr's CV Apex Legends Anti-Recoil modified by Michael.
LOOK SENSITIVITY (ADS) Insane (8)
GLOBAL_HSCALE = 2.21
GLOBAL_VSCALE = 2.21
DATA_SET = 1
DEADZONE_SIZE = 0
My ingame settings for Apex Legends are ALC settings, so i dont use dedicated sensitivity like 7 or 8
i guess its 8 because all my YAW speeds are set to MAX. Also i have 0 deadzone in my ALC settings, so i guess
i put in 0 deadzone in the GVC script??
can somebody explain me what this GLOBAL_HSCALE/VSCALE is. i changed it from default 2.1 to 2.21. This was normally set to 1.0 for both scalings in previous versions of the GCV script. why is this changed to 2.1?
the anti recoil barrel scaling i left to default on the script, but have set all 4 Optics Scalings to 1.00 and i set my optics in game to personal preference.
1x Optic/Iron Sight, 1.5
2x 1.9
3x 2.9
4x 2.4
6/10 2.6
-
poizenbox - Sergeant
- Posts: 6
- Joined: Sat Sep 19, 2020 8:07 pm
Re: [GCV/GPC] Apex Legends CV Anti-Recoil
I want to use CV Anti-recoil in a Universal game pack.
I have completed the Cmputer vision settings, and I have set Anti-recoil [Computer Vision (Apex Legends)] in the Universal game pack settings, but it does not work.
Would you please teach me who can solve it ?
Configuration: mouse --TT2 --PC
Apex Legends is the PC version.
Input is M & K
I have completed the Cmputer vision settings, and I have set Anti-recoil [Computer Vision (Apex Legends)] in the Universal game pack settings, but it does not work.
Would you please teach me who can solve it ?
Configuration: mouse --TT2 --PC
Apex Legends is the PC version.
Input is M & K
-
sk450ol - Private First Class
- Posts: 2
- Joined: Wed Nov 18, 2020 1:49 pm
Re: [GCV/GPC] Apex Legends CV Anti-Recoil
sk450ol wrote:I want to use CV Anti-recoil in a Universal game pack.
Hi,
You have followed this guide and set everything up? viewtopic.php?f=15&t=15147
For PC you'll need to set your output protocol in Gtuner>Device Configuration to xbox 360.
You will also need to install an input translator for apex legends into the same memory slot as the gamepack: https://www.consoletuner.com/greslib/?w618
ConsoleTuner Support Team || ConsoleTuner Discord || InputSense Discord
- Mad
- Major General
- Posts: 4536
- Joined: Wed May 22, 2019 5:39 am
Re: [GCV/GPC] Apex Legends CV Anti-Recoil
Hi
The CV setting has been completed to the point of detection, and the M & K input is also output by XB1, but the anti-recoil does not work.
M (Input A) & K (Input B) → TT2 (Output) → PC
I'm using the above connection method, but does PROG need not be connected ?
The CV setting has been completed to the point of detection, and the M & K input is also output by XB1, but the anti-recoil does not work.
M (Input A) & K (Input B) → TT2 (Output) → PC
I'm using the above connection method, but does PROG need not be connected ?
-
sk450ol - Private First Class
- Posts: 2
- Joined: Wed Nov 18, 2020 1:49 pm
Re: [GCV/GPC] Apex Legends CV Anti-Recoil
sk450ol wrote:Hi
The CV setting has been completed to the point of detection, and the M & K input is also output by XB1, but the anti-recoil does not work.
M (Input A) & K (Input B) → TT2 (Output) → PC
I'm using the above connection method, but does PROG need not be connected ?
Yes your titan two must be conected to the pc in prog mode
-
Dimakra666 - Sergeant Major of the Army
- Posts: 231
- Joined: Fri Feb 17, 2017 3:34 am
Re: [GCV/GPC] Apex Legends CV Anti-Recoil
Hey guys, I have a question.
I'd like to use this anti-recoil script with the inverted look mode.
Do you have any answer to use it?
Or, could you tell me the related topic URL?
I'd like to use this anti-recoil script with the inverted look mode.
Do you have any answer to use it?
Or, could you tell me the related topic URL?
-
yuzukosho - Private
- Posts: 1
- Joined: Tue Nov 24, 2020 1:57 pm
Return to Gtuner Computer Vision
Who is online
Users browsing this forum: No registered users and 37 guests