Computer Vision on OSX/MAC?
19 posts
• Page 1 of 2 • 1, 2
Computer Vision on OSX/MAC?
So the only guides i've found for computer vision are all related to Windows, but Computer Vision seems to show up in the OSX app.
I'm trying to define python3 but when browsing it does not let me select python3 at all, i tried manually editing the `python_path` in `Gtuner.cfg` but even when i set it to the exact path of python3 it still says in settings can't find python3
How are we supposed to set this up on OSX?
Also, if i select "Detect Devices" it just crashes over and over again
The boxes show red but it does say python was found (after manually editing cfg file). Trying to setup PS4 remote play, and only tutorial on here says to select "Display Capture" but that's not even an option when adding video input device
So is Computer Vision even working on OSX at all?
I'm trying to define python3 but when browsing it does not let me select python3 at all, i tried manually editing the `python_path` in `Gtuner.cfg` but even when i set it to the exact path of python3 it still says in settings can't find python3
How are we supposed to set this up on OSX?
Also, if i select "Detect Devices" it just crashes over and over again
The boxes show red but it does say python was found (after manually editing cfg file). Trying to setup PS4 remote play, and only tutorial on here says to select "Display Capture" but that's not even an option when adding video input device
So is Computer Vision even working on OSX at all?
-
tripflex - Staff Sergeant
- Posts: 11
- Joined: Wed Mar 14, 2018 2:13 am
Re: Computer Vision on OSX/MAC?
The Computer Vision interface was fully tested on Mac and worked as expected in a Macbook Air updated with latest OSX (Catalina). It is required install Python 3.8 (the Python version that comes with OSX does not work).
Today will not be possible, but tomorrow I will recheck to be sure everything still working after the recent OSX updates.
Today will not be possible, but tomorrow I will recheck to be sure everything still working after the recent OSX updates.
ConsoleTuner Support Team
-
J2Kbr - General of the Army
- Posts: 20323
- Joined: Tue Mar 18, 2014 1:39 pm
Re: Computer Vision on OSX/MAC?
I was able to install Python 3.8 on my Mac (10.15.5 Catalina) and I've installed the OpenCV-Python module (from here https://pypi.org/project/opencv-python/) but GTuner doesn't seem to be able to detect it.
Do I need to move the PIP files somewhere for it to work on the Mac? Any help would be appreciated.
Do I need to move the PIP files somewhere for it to work on the Mac? Any help would be appreciated.
- Attachments
-
- Screen Shot 2020-06-16 at 3.33.49 PM.png (76.66 KiB) Viewed 3893 times
-
bmolls - Corporal
- Posts: 4
- Joined: Sun May 31, 2020 12:38 am
Re: Computer Vision on OSX/MAC?
bmolls wrote:Do I need to move the PIP files somewhere for it to work on the Mac? Any help would be appreciated.
You may have installed it for python2. Try running pip3 install opencv-python
ConsoleTuner Support Team || ConsoleTuner Discord || InputSense Discord
- Mad
- Major General
- Posts: 4536
- Joined: Wed May 22, 2019 5:39 am
Re: Computer Vision on OSX/MAC?
That was it - now it shows configured. Thanks man!!!
- Attachments
-
- Screen Shot 2020-06-16 at 4.02.50 PM.png (66.88 KiB) Viewed 3891 times
-
bmolls - Corporal
- Posts: 4
- Joined: Sun May 31, 2020 12:38 am
Re: Computer Vision on OSX/MAC?
GTuner keeps crashing when I am trying to 'Detect Devices' under the CV section of the Video Input Configuration window.
Any idea what's causing it to crash? I am using the Aver Media GC553 and it is streaming properly within the vendor's software so I know that the video capture card is set up properly between the console and computer.
I've added a few more screen shots. It looks like numpy may not be in the correct directory for Python/CV but I'm just speculating at this point. I updated some packages but didn't seem to fix the issue.
Any idea what's causing it to crash? I am using the Aver Media GC553 and it is streaming properly within the vendor's software so I know that the video capture card is set up properly between the console and computer.
I've added a few more screen shots. It looks like numpy may not be in the correct directory for Python/CV but I'm just speculating at this point. I updated some packages but didn't seem to fix the issue.
- Attachments
-
- Screen Shot 2020-06-17 at 10.40.06 AM.png (11.72 KiB) Viewed 3867 times
-
- Screen Shot 2020-06-17 at 10.37.17 AM.png (12.47 KiB) Viewed 3867 times
-
- Screen Shot 2020-06-17 at 10.28.11 AM.png (48.5 KiB) Viewed 3867 times
-
- Crash.png (96.99 KiB) Viewed 3868 times
-
- Screen Shot 2020-06-17 at 10.05.34 AM.png (122.58 KiB) Viewed 3868 times
-
bmolls - Corporal
- Posts: 4
- Joined: Sun May 31, 2020 12:38 am
Re: Computer Vision on OSX/MAC?
Thank you for providing the crash log. I will be checking it shortly.
In the meantime, enter the input device index manually in the field named "Video Input Configuration" and select AVFoundation in the combobox.
The number 0 is possible the webcam (you can try 0 to check if the webcam image shows on computer vision interface). Then try 1, if not yet the Aver Media GC553, try 2, 3 and so on.
In the meantime, enter the input device index manually in the field named "Video Input Configuration" and select AVFoundation in the combobox.
The number 0 is possible the webcam (you can try 0 to check if the webcam image shows on computer vision interface). Then try 1, if not yet the Aver Media GC553, try 2, 3 and so on.
ConsoleTuner Support Team
-
J2Kbr - General of the Army
- Posts: 20323
- Joined: Tue Mar 18, 2014 1:39 pm
Re: Computer Vision on OSX/MAC?
Hi guys, I'm also trying to setup it on MAC but I have another issue. No matter what I try I always get this error which seem to be related to GTuner not being able to run Python or so...
These are my settings:
And this is the error I see in log:
Any idea what could be wrong?
These are my settings:
And this is the error I see in log:
Any idea what could be wrong?
-
damian.uberti - Private
- Posts: 1
- Joined: Sat Aug 01, 2020 12:11 am
Re: Computer Vision on OSX/MAC?
damian.uberti wrote:Any idea what could be wrong?
It seems the Gphyton helper application was not found. Please try with the 1.08 Beta:
viewtopic.php?f=2&t=15250
Scroll down this until "Links for direct download" and click on MAC: Gtuner IV 1.08B
ConsoleTuner Support Team
-
J2Kbr - General of the Army
- Posts: 20323
- Joined: Tue Mar 18, 2014 1:39 pm
Re: Computer Vision on OSX/MAC?
im having the same prob on mac
-
Shthappensbro - Major
- Posts: 754
- Joined: Wed Aug 16, 2017 4:55 pm
19 posts
• Page 1 of 2 • 1, 2
Return to Gtuner Computer Vision
Who is online
Users browsing this forum: No registered users and 148 guests