RAW Mouse and Setups

GCV scripting for Gtuner IV and Titan Two. Configuration, examples, questions.

Re: RAW Mouse and Setups

Postby ShakesB » Fri Apr 09, 2021 10:55 am

Scachi wrote:
ShakesB wrote:Diggin for old Thread. Never got solved for me.

Is IT possible to Set Up RAW Mouse with xim Apex and NO capture Card Just CV over program Port?

CV is "Computer Vision", supposed to be able to "see" what is going on on your gaming screen/tv and doing actions based on that.
Without any capture card or streaming app, without any option for gtuner IV to read the gaming video frames most computer vision scripts will be useless.



Right. But how to Set Up RAW Mouse? I do use CV over GTuner IV and T2s ProgramPort.
User avatar
ShakesB
Staff Sergeant
Staff Sergeant
 
Posts: 13
Joined: Fri Jun 19, 2020 4:21 am

Re: RAW Mouse and Setups

Postby Scachi » Fri Apr 09, 2021 11:15 am

"raw mouse" .. what is your understanding of that ? not sure how to correctly understand this term.
The T2 will see mouse as raw input only when you connect the mouse directly to the T2 as in:
mouse->T2 == T2 reads mouse as "raw mouse" inputs

When you connect the mouse to your xim apex and that into T2 the T2 will only read controller inputs as your xm apex is only outputting controller:
mouse->xim apex->T2 == T2 reads Xim as controller inputs and has no access to the mouse data
User avatar
Scachi
Brigadier General
Brigadier General
 
Posts: 3044
Joined: Wed May 11, 2016 6:25 am
Location: Germany

Re: RAW Mouse and Setups

Postby ShakesB » Fri Apr 09, 2021 2:38 pm

Scachi wrote:The T2 will see mouse as raw input only when you connect the mouse directly to the T2 as in:
mouse->T2 == T2 reads mouse as "raw mouse" inputs


That is what i wanna do. heard that this setup would work great but dont get it to running.

so to clearify: K&C into Xim -> T2 -> PC
Mouse -> T2 -> PC
and T2 via Program Port + Regular Port -> PC (<- to get CV Running)
User avatar
ShakesB
Staff Sergeant
Staff Sergeant
 
Posts: 13
Joined: Fri Jun 19, 2020 4:21 am

Re: RAW Mouse and Setups

Postby Scachi » Fri Apr 09, 2021 5:09 pm

For using the mouse on the T2 you need to use an Input Translator.
Download one for your game from the Online Resource and drag it to the slot of your T2 you have the script installed to.
You can click download on the Input Translator to be able to see the mappings done and adjust them when required.
When you change the settings in that Input Translator file you need to save it and install it to the slot again.
User avatar
Scachi
Brigadier General
Brigadier General
 
Posts: 3044
Joined: Wed May 11, 2016 6:25 am
Location: Germany

Re: RAW Mouse and Setups

Postby Buffy » Sat Apr 10, 2021 11:09 pm

ShakesB wrote:
Scachi wrote:The T2 will see mouse as raw input only when you connect the mouse directly to the T2 as in:
mouse->T2 == T2 reads mouse as "raw mouse" inputs


That is what i wanna do. heard that this setup would work great but dont get it to running.

so to clearify: K&C into Xim -> T2 -> PC
Mouse -> T2 -> PC
and T2 via Program Port + Regular Port -> PC (<- to get CV Running)


You will not be able to use CV without a capture card/streaming app.

If you want the T2 to output as raw keyboard/mouse, you will need to set the output as Multi Interface HID

However, like Scachi said, an input translator will most likely serve you better. Without a full understanding of scripting (almost all scripts are NOT for KBM raw output)/what raw output actually is, it will be difficult for you to create scripts for Multi Interface HID.
ConsoleTuner Support Team || Discord || Custom Scripts
User avatar
Buffy
Lieutenant
Lieutenant
 
Posts: 422
Joined: Wed Jul 20, 2016 5:23 am

Re: RAW Mouse and Setups

Postby ShakesB » Sun Apr 11, 2021 2:42 pm

Buffy wrote:
ShakesB wrote:
Scachi wrote:The T2 will see mouse as raw input only when you connect the mouse directly to the T2 as in:
mouse->T2 == T2 reads mouse as "raw mouse" inputs


That is what i wanna do. heard that this setup would work great but dont get it to running.

so to clearify: K&C into Xim -> T2 -> PC
Mouse -> T2 -> PC
and T2 via Program Port + Regular Port -> PC (<- to get CV Running)


You will not be able to use CV without a capture card/streaming app.

If you want the T2 to output as raw keyboard/mouse, you will need to set the output as Multi Interface HID

However, like Scachi said, an input translator will most likely serve you better. Without a full understanding of scripting (almost all scripts are NOT for KBM raw output)/what raw output actually is, it will be difficult for you to create scripts for Multi Interface HID.



Thx 4 beeing that clear.
User avatar
ShakesB
Staff Sergeant
Staff Sergeant
 
Posts: 13
Joined: Fri Jun 19, 2020 4:21 am

Previous

Return to Gtuner Computer Vision

Who is online

Users browsing this forum: No registered users and 65 guests