Capture Card/Series X Setup Question

GCV scripting for Gtuner IV and Titan Two. Configuration, examples, questions.

Capture Card/Series X Setup Question

Postby cb57 » Wed Mar 03, 2021 5:58 pm

Technical question for those that might know.

I'm currently using a capture card (live gamer mini) with a Series X. The capture card will only passthrough in 1080p/60fps. I want to play at 1440p/120 and capture at 1080/60. Monitor is a Dell S2721DGF with 2 hdmi 2.0 ports, DisplayPort, 2 downstream USB ports, and 2 upstream USB ports. Would splitting the HDMI output from the xbox work? Or is there a way to output directly from the monitor to the capture card? Thanks
User avatar
cb57
Sergeant First Class
Sergeant First Class
 
Posts: 21
Joined: Wed Mar 13, 2019 1:14 pm

Re: Capture Card/Series X Setup Question

Postby Sin Of Barraka » Thu Apr 01, 2021 12:49 pm

You would need to upgrade to the Live Gamer Ultra in order to support passthrough at 120 FPS. The mini caps out at 60FPS. This would be the easiest way.

Otherwise you would need to find a splitter that supports up to 120 FPS, and ensure its HDMI 2.0 compatible. Might not work, but Amazon has pretty good return policy, so you could try out an HDMI splitter and if it does not work, return it.


Live Gamer Ultra : https://www.avermedia.com/us/product-detail/GC553

Live Gamer Mini: https://www.avermedia.com/us/product-detail/GC311

HDMI Splitter: https://www.amazon.com/HDMI-Splitter-1x2-4K-60Hz/dp/B07WR7KP1B
Make sure if you get them off of Amazon that they have free returns in-case they do not work. It can be tricky finding one on Amazon with accurate descriptions and specs.
User avatar
Sin Of Barraka
Sergeant
Sergeant
 
Posts: 6
Joined: Thu Apr 01, 2021 11:18 am


Return to Gtuner Computer Vision

Who is online

Users browsing this forum: No registered users and 65 guests