GLOBAL_HSCALE / GLOBAL_VSCALE
6 posts
• Page 1 of 1
GLOBAL_HSCALE / GLOBAL_VSCALE
[img]Hi. Apologies if this has been answered before, but I have scoured the main Apex CV thread for almost 6 months. Many people recommend the global scales to be,
GLOBAL_HSCALE = 2.1
GLOBAL_VSCALE = 2.1
I just bought a Logitech g502 Hero mouse hoping a higher DPI would fix my issue. It didn't I just cannot get the recoil to work properly unless my scale is up incredibly high. The CV itself works fine, detects gun changes, recoil, but it just feels strange. My in game settings are correct, and I have only adjusted the sensitivity in the Input Translator a small amount. all the articles ive read say DPI should be at max where possible. Ive tried at 12000/16000/25600
I have my mouse (A) Keyboard (B), prog connected to PC and output to the PS5 (I'm using a DS4 controller connected wirelessly to the titan2 for authentication), and I've plugged it into the power. Been having the same problem on my PS4. I'm about to go and get an OTG adapter to connect the controller direct instead of wireless but I don't think this will fix the problem.
EDIT: Got the adapter, but according to the CV setup thread, the PC has to be plugged into the PROG port to work?
I'm pulling my hair out trying to figure this out, not sure if I'm looking in the right place. If there is a kind soul that could provide some assistance, even point me in the right place to look, I would be truly grateful.
I've attached a screenshot of my Gtuner Screen.
GLOBAL_HSCALE = 2.1
GLOBAL_VSCALE = 2.1
I just bought a Logitech g502 Hero mouse hoping a higher DPI would fix my issue. It didn't I just cannot get the recoil to work properly unless my scale is up incredibly high. The CV itself works fine, detects gun changes, recoil, but it just feels strange. My in game settings are correct, and I have only adjusted the sensitivity in the Input Translator a small amount. all the articles ive read say DPI should be at max where possible. Ive tried at 12000/16000/25600
I have my mouse (A) Keyboard (B), prog connected to PC and output to the PS5 (I'm using a DS4 controller connected wirelessly to the titan2 for authentication), and I've plugged it into the power. Been having the same problem on my PS4. I'm about to go and get an OTG adapter to connect the controller direct instead of wireless but I don't think this will fix the problem.
EDIT: Got the adapter, but according to the CV setup thread, the PC has to be plugged into the PROG port to work?
I'm pulling my hair out trying to figure this out, not sure if I'm looking in the right place. If there is a kind soul that could provide some assistance, even point me in the right place to look, I would be truly grateful.
I've attached a screenshot of my Gtuner Screen.
-
bedl4m - Master Sergeant
- Posts: 26
- Joined: Wed Jul 08, 2020 2:52 pm
Re: GLOBAL_HSCALE / GLOBAL_VSCALE
there is nothing wrong with high SCALE values as long as they work for you.
-
Scachi - Brigadier General
- Posts: 3044
- Joined: Wed May 11, 2016 6:25 am
- Location: Germany
Re: GLOBAL_HSCALE / GLOBAL_VSCALE
Thanks Scachi! I played around with some other settings and I worked out that it's all about dpi. Higher dpi, higher SCALE. So I dropped it down to 8000, then changed my sense in the IT so that default and alternate are the same. Works so much better now... (Feels like it anyways)
-
bedl4m - Master Sergeant
- Posts: 26
- Joined: Wed Jul 08, 2020 2:52 pm
Re: GLOBAL_HSCALE / GLOBAL_VSCALE
bedl4m wrote:Thanks Scachi! I played around with some other settings and I worked out that it's all about dpi. Higher dpi, higher SCALE. So I dropped it down to 8000, then changed my sense in the IT so that default and alternate are the same. Works so much better now... (Feels like it anyways)
hi !
can u share your setting please ?
how can u use T2 without xim ^^
thanks :p
-
El1miNate_ - Master Sergeant
- Posts: 34
- Joined: Wed Dec 13, 2017 2:26 pm
Re: GLOBAL_HSCALE / GLOBAL_VSCALE
El1miNate_ wrote:bedl4m wrote:Thanks Scachi! I played around with some other settings and I worked out that it's all about dpi. Higher dpi, higher SCALE. So I dropped it down to 8000, then changed my sense in the IT so that default and alternate are the same. Works so much better now... (Feels like it anyways)
hi !
can u share your setting please ?
how can u use T2 without xim ^^
thanks :p
I put down my settings in my original post, and there's a screenshot of my sense etc.
-
bedl4m - Master Sergeant
- Posts: 26
- Joined: Wed Jul 08, 2020 2:52 pm
Re: GLOBAL_HSCALE / GLOBAL_VSCALE
Thx!
I have an issue the cv script doesn’t work..
The script work for you ?
I have an issue the cv script doesn’t work..
The script work for you ?
-
El1miNate_ - Master Sergeant
- Posts: 34
- Joined: Wed Dec 13, 2017 2:26 pm
6 posts
• Page 1 of 1
Return to Gtuner Computer Vision
Who is online
Users browsing this forum: No registered users and 39 guests