[SOLVED] CV not working now on Xbox 1440p@120hz
7 posts
• Page 1 of 1
[SOLVED] CV not working now on Xbox 1440p@120hz
I use AverMedia Live Gamer ULTRA (GC553) for Xbox Series X 1440p@120hz.
CV was working fine until yesterday with the following settings under Advanced Configurations.
CAP_PROP_FPS=60
CAP_PROP_FRAME_WIDTH=2560
CAP_PROP_FRAME_HEIGHT=1440
Strangely, when I tried to start today, I got "Resolution Not Supported for Resizing" on CV screen.
CV works fine when I put my Xbox to 1440p@60hz so I don't think it's a resolution issue.
OBS and RECentral will show game screen on 1440p@120hz, only CV doesn't work.
Tried re-downloading GTuner IV, reinstalling Python, reconnecting capture card, rebooting PC and Xbox.
Trying to troubleshoot, but I cannot figure it out.
They were working fine for months until yesterday, so I don't understand what is wrong.
Please help, thanks.
CV was working fine until yesterday with the following settings under Advanced Configurations.
CAP_PROP_FPS=60
CAP_PROP_FRAME_WIDTH=2560
CAP_PROP_FRAME_HEIGHT=1440
Strangely, when I tried to start today, I got "Resolution Not Supported for Resizing" on CV screen.
CV works fine when I put my Xbox to 1440p@60hz so I don't think it's a resolution issue.
OBS and RECentral will show game screen on 1440p@120hz, only CV doesn't work.
Tried re-downloading GTuner IV, reinstalling Python, reconnecting capture card, rebooting PC and Xbox.
Trying to troubleshoot, but I cannot figure it out.
They were working fine for months until yesterday, so I don't understand what is wrong.
Please help, thanks.
- Attachments
-
- unknown.png (53.56 KiB) Viewed 2246 times
Last edited by NendoDC on Fri Mar 25, 2022 8:36 pm, edited 1 time in total.
-
NendoDC - Corporal
- Posts: 4
- Joined: Sun Mar 06, 2022 5:44 pm
Re: CV not working now on Xbox 1440p@120hz
Did you find a solution ?
-
chr1s4life - Private
- Posts: 1
- Joined: Mon Dec 06, 2021 2:34 pm
Re: CV not working now on Xbox 1440p@120hz
No I haven't.
I also tried older firmware for AverMedia Live Gamer ULTRA (GC553), but that did not solve the issue.
Don't think that this is the issue, but I'm just hoping that it's not some xbox update that caused the change.
May be I need somebody who has a working environment with AverMedia Live Gamer ULTRA (GC553) and Xbox Series X 1440p@120hz, and tell me their firmware version, settings, etc.
I also tried older firmware for AverMedia Live Gamer ULTRA (GC553), but that did not solve the issue.
Don't think that this is the issue, but I'm just hoping that it's not some xbox update that caused the change.
May be I need somebody who has a working environment with AverMedia Live Gamer ULTRA (GC553) and Xbox Series X 1440p@120hz, and tell me their firmware version, settings, etc.
-
NendoDC - Corporal
- Posts: 4
- Joined: Sun Mar 06, 2022 5:44 pm
Re: CV not working now on Xbox 1440p@120hz
OK, I found the solution.
If you followed "Gtuner IV Computer Vision Setup and Info" to setup CV, the installed opencv version is 4.2.0.34.
If you update opencv to a higher version, CV works on 1440p@120hz.
The latest opencv as of now is 4.5.5.64, but this dropped my fps on Gtuner, so I use 4.3.0.36 for now.
Just type the following on cmd to update opencv (or to any other version you wish)
pip install opencv-python==4.3.0.36
If you followed "Gtuner IV Computer Vision Setup and Info" to setup CV, the installed opencv version is 4.2.0.34.
If you update opencv to a higher version, CV works on 1440p@120hz.
The latest opencv as of now is 4.5.5.64, but this dropped my fps on Gtuner, so I use 4.3.0.36 for now.
Just type the following on cmd to update opencv (or to any other version you wish)
pip install opencv-python==4.3.0.36
- Attachments
-
- SS1.jpg (54.79 KiB) Viewed 2158 times
-
NendoDC - Corporal
- Posts: 4
- Joined: Sun Mar 06, 2022 5:44 pm
Re: [SOLVED] CV not working now on Xbox 1440p@120hz
CV works but the scripts do not.
Example
Apex Anti Recoil will load and the CV displays the image but its not actually doing anything. CV is detecting everything as it should but the actual anti recoil is doing nothing.
Example
Apex Anti Recoil will load and the CV displays the image but its not actually doing anything. CV is detecting everything as it should but the actual anti recoil is doing nothing.
-
mrbubbles2k4 - Sergeant
- Posts: 7
- Joined: Mon Aug 09, 2021 3:20 pm
Re: CV not working now on Xbox 1440p@120hz
NendoDC wrote:OK, I found the solution.
If you followed "Gtuner IV Computer Vision Setup and Info" to setup CV, the installed opencv version is 4.2.0.34.
If you update opencv to a higher version, CV works on 1440p@120hz.
The latest opencv as of now is 4.5.5.64, but this dropped my fps on Gtuner, so I use 4.3.0.36 for now.
Just type the following on cmd to update opencv (or to any other version you wish)
pip install opencv-python==4.3.0.36
But do your CV scripts work?
- jas0n
- Sergeant
- Posts: 9
- Joined: Thu Apr 08, 2021 1:57 am
Re: [SOLVED] CV not working now on Xbox 1440p@120hz
The script I use is "Modified version v1.18, by Michael. (based on v1.49 - Sep 8, 2021)".
Scripts are working fine for me.
Scripts are working fine for me.
-
NendoDC - Corporal
- Posts: 4
- Joined: Sun Mar 06, 2022 5:44 pm
7 posts
• Page 1 of 1
Return to Gtuner Computer Vision
Who is online
Users browsing this forum: No registered users and 71 guests