Xim Apex - Best CV Settings for Apex Legends

[XimApexCVTester]

I've been working on a good combo between perfect Xim & CV Settings for Apex Legends. There aren't many people that use it or have it set up good enough, and most are facing the Stacking problem making it impossible to aim. I have finally finished and perfected Xim & CV Combo. The CV is fine tuned to perfection, and almost every single gun is a laser beam.
These settings will not work for Controller, you will have to find or edit them yourself if you are looking for a controller one. There are plenty people in ConsoleTuners Discord that will be willing to help.

A few things to keep in mind...
*The Turbo Havoc seems to be bugged, even at 0.00 Value.
*2x-4x is also bugged, just don't use it imo.
*I am mainly a red dot user, so all of these guns are perfectly tuned for 1x, the only thing you guys MIGHT need to change is 2x and 3x, but I think I've got the best values for both, especially 3x. So change them if you guys aren't happy with 2x/3x.
*I suggest keeping a backup of my CV File, just incase you start messing around gun values and need to remember the OG Value. As long as Global H&V value is perfect, there should be no need to change specific gun values.
*WARNING, I have used different ps4/ps5 consoles and found that sometimes the global value isnt the same, so hopefully this doesnt happen to you guys, if it does. Just find your own Global values. I recommend starting with a Havoc without a turbo at 20m with a red dot, until its laser, then double check and repeat with a 301 & Flatline. If Global Values are perfect, there will be no need to change the gun values.

These settings were recorded on PS5 Console & PS4 Version of Apex Legends. (Hopefully the values don't need to be changed for other consoles)
Requirements:
SD Card
M_Apex Legends CV & Gamepack (I will provide CV)

I will start with my Xim Settings, I recommend you guys use these XIM Settings, and get used to them. I have used almost all Xim settings there are and only these I found that are the best in general and especially with CV.
I've gotten masters recently, and hold season KD over 6/7, and overall over 5.
Xim Response Rate : 500hz
Mouse Response Rate : 500hz
Mouse DPI : 3200
Apex Legends Config : ApexL-Hip-P4.2

Hip:
26.00
Sync : Default
Y/X Ratio : 1.10
Smoothing, Steady Aim & Boost : 0
SAB : Off

Ads:
12.85
Sync : Default
Y/X Ratio : (Depends on you, I change mine around from 1.15 to 1.75) - 1.75
Smoothing, Steady Aim & Boost : 0

In-Game Settings:
Look Sens : 7
Look Sens ADS : 2
Per Optic Settings : Off
Response Curve : Classic
Look Deadzone : Small
Movement Deadzone : Small
Inverted Look : Off
Vibration : On
ALC : Off (But turn them On for now to EDIT Pre Optic Settings)
ALC > Pre Optic ADS Sens : On
1x 8.2
2x 9.6
3x 10.0...
Now turn ALC Settings Off.

apex_antirecoil_M.zip

Apex Legends CV Python File, Replace it with existing file from Michael

(34.34 KiB) Downloaded 679 times

Use M_Apex Legends gamepacks base version, delete your old overwrite over the new 1.
The only thing I've changed is turned off all the extra mods, but thats upto you guys tho.
Make sure apex_antirecoil_M.py_modified by Michael is ticked under Play with Computer Vision.
AND! DO NOT TURN OFF Random Anti Recoil, it may help for controller users but this will only make things worse for Xim.
I've found it actually helps against Stacking.

To take this a step further and be a laser god. Don't forget to Strafe Left & Right (A-D) Super quick to eliminate any extra random recoil & activating sticky aim assist.

I think this is all there is to it, It is 4am for me ATM so If I have forgotten anything, I will edit it in later.
I will most likely not be free or be playing from the end of this week so I cannot promise any future changes.
Hope you guys like this, enjoy and good luck!

[izzy08]

Getting this error ehen I try to run your script

GCV Error: 'NoneType' object has no attribute 'size'

GCV Error: Exception ignored in:
Traceback (most recent call last):
File "", line 14, in __del__

Computer Vision: ERROR: Gpython process exited with error code 114

[XimApexCVTester]

Getting this error ehen I try to run your script

GCV Error: 'NoneType' object has no attribute 'size'

GCV Error: Exception ignored in:
Traceback (most recent call last):
File "", line 14, in __del__

Computer Vision: ERROR: Gpython process exited with error code 114

I tried helping you in discord DMs and you never replied back.
It works for me & others that tried it.
Ill say what I said in Discord, try Michaels original CV File and see if that works.
If it does, just copy paste the starting bit from my CV with all the values into Michaels Original CV file.

[King Cuck]

The post ive been dreaming of, im setting these up and if it works like you say, ill kiss you.

[King Cuck]

damn, its pretty good, im on xbox and theres a little sway but for the most part it works really well. Thank you man. Do you use mirco strafe in michaels settings or just do it when shooting with keyboard to get the sticky aim. also dont post this to the xim shared configs unless you want to be overwhelmed. lol

Also you have the range for x/y on ADS for the xim, but what does that "Impact" per say?

The only issue im having is the ADS seems a little slow, is that how you like it? or does that have to be like that for the AA to work?

[XimApexCVTester]

damn, its pretty good, im on xbox and theres a little sway but for the most part it works really well. Thank you man. Do you use mirco strafe in michaels settings or just do it when shooting with keyboard to get the sticky aim. also dont post this to the xim shared configs unless you want to be overwhelmed. lol

Also you have the range for x/y on ADS for the xim, but what does that "Impact" per say?

The only issue im having is the ADS seems a little slow, is that how you like it? or does that have to be like that for the AA to work?

I dont use any of the mods from the gamepack, I find it manually strafing much better with more control.

I dont understand your impact line, It depends on what my x/y is for ADS, sometimes I use 1.75, sometimes I use 1.5... just whatever feels right to me.

I just like my ADS sensitivity like that, I don't have it that low to help with aim assist or anything. I found it perfect for me.

[Unable]

thank. it's better than what I had. Xbox

[King Cuck]

thank. it's better than what I had. Xbox

Try MArias config from the xim forms with this setup and its better for xbox

[Unable]

thank. it's better than what I had. Xbox

Try MArias config from the xim forms with this setup and its better for xbox

I did not find. can you give a link?

[King Cuck]

https://community.xim.tech/index.php?topic=95373.0