Help
6 posts
• Page 1 of 1
Help
I am trying to setup the G25 on the titan one to use with PS4. I have downloaded the script, transferred over to the memory. Turn on the ps4 manually without the controller. I have the wheel plugged into the computer, ps4 charging cable in the input section of the titan one. Its authenticated, I am able to select the memory slot 1. But the wheel is not working. I am able to look in Max Aim DI and not able to select g25. Any help would be appreciated. Thanks.....
-
firebird2727 - Staff Sergeant
- Posts: 13
- Joined: Sat Jan 17, 2015 8:32 pm
Re: Help
I am able to pull up the g25 as a direct input. Still have to use the ps4 controller to move around in ps4 screens. Seems as the wheel is not working on ps4. What am I doing wrong.
-
firebird2727 - Staff Sergeant
- Posts: 13
- Joined: Sat Jan 17, 2015 8:32 pm
Re: Help
Does the wheel plug into the ps4 or the computer?
-
firebird2727 - Staff Sergeant
- Posts: 13
- Joined: Sat Jan 17, 2015 8:32 pm
Re: Help
Right now I am going through setting the Direct input to the controller to emulate. I was wondering if anyone had a direct input for a g25 that I may use for a template. I wanna try and make sure I get in the right direction. Thanks in advance.
-
firebird2727 - Staff Sergeant
- Posts: 13
- Joined: Sat Jan 17, 2015 8:32 pm
Re: Help
1) Titan One on PS4.
2) A DS4 controller on Titan One (for authentication)
3) Titan One on PC (via mini-USB cable, PCPROG port)
4) Your Steering Wheel on PC.
5) Open Gtuner.
6) Open MaxAim DI (menu plugins)
7) On MaxAim DI create a new layout.
8) Bind the correspondent Input to the controller layout.
Select the Direct Input settings here:
And here you choose your controller:
Here i hold 1 button and i can see it's the button1.
Then you create a new layout, right click on a button, choose Direct Input
and do what you want like bind button1 where you want.
2) A DS4 controller on Titan One (for authentication)
3) Titan One on PC (via mini-USB cable, PCPROG port)
4) Your Steering Wheel on PC.
5) Open Gtuner.
6) Open MaxAim DI (menu plugins)
7) On MaxAim DI create a new layout.
8) Bind the correspondent Input to the controller layout.
Select the Direct Input settings here:
And here you choose your controller:
Here i hold 1 button and i can see it's the button1.
Then you create a new layout, right click on a button, choose Direct Input
and do what you want like bind button1 where you want.
Console tuner since my 1st controller.
Scripting, a game in the game.
Believe or dare, It's Titanic!
Scripting, a game in the game.
Believe or dare, It's Titanic!
-
Prototype - Major General
- Posts: 3250
- Joined: Sun Dec 16, 2012 1:43 pm
Re: Help
Thanks for the replys. I have mapped the buttons and seems to be working ok. I tried mapping the d-pad on the shifter and it says its pointing to POV1, no matter what direction. I have assigned it, but it work in game or if I test it. I also tried assigning a button for the touchpad corresponding with the button when I press it. I also seems that I have to hold the clutch and the gas at the same time to get the car to move. I have uploaded the layout so for.
- Attachments
-
- G25.glf
- (7.5 KiB) Downloaded 259 times
-
firebird2727 - Staff Sergeant
- Posts: 13
- Joined: Sat Jan 17, 2015 8:32 pm
6 posts
• Page 1 of 1
Return to Gtuner Plugins Support
Who is online
Users browsing this forum: No registered users and 65 guests