Recoil Compensation (aka Anti-Recoil)

Tutorials, How-tos and FAQs for the Titan One device.

Recoil Compensation (aka Anti-Recoil)

Postby UK_Wildcats » Thu Feb 19, 2015 6:23 pm

Anti-recoil is been a hot topic lately. Everyone seems to want to know what "number do I use?" Unfortunately, there is no way to provide a good number or rule because of all the factors that involved.

Background: Recoil compensation (aka anti-recoil) is simply applying look adjustments while shooting to compensate for the recoil of the gun. If a gun has recoil, it is almost always upward with possibly slight bit to a side(s). To compensate for this we naturally adjust the look joystick in a downward direction while we are shooting. In real time we can see the adjustments necessary and add more/less to the desired level. For automatic recoil compensation a certain amount of downward look settings have to be applied while shooting.

Below are the factors that have to be considered when adjusting anti-recoil.

1. Weapon: Every weapon has its own type and severity of recoil. The more sever the recoil, the more recoil compensation is needed. Recoil on automatic weapons are typically worse than semi or burst weapons.

2. Recoil Pattern: Some patterns are simply upward. Others are up and have some side movement as well.

3. Attachments: Attachments can have a positive and negative effect on recoil. Grips can dampen (lessen) the recoil while other attachments make make the recoil worse (rapid fire, extended barrels, etc.)

4. Sensitivity: Even when using the exact same weapon & attachments, the amount of recoil compensation will be different for different sensitivity settings. For example, a small stick movement with a sensitivity of 3 will be less than the same movement on a sensitivity of 12.

5. Shooting Style: Some people always aim for the head. Others aim for upper body and allow the recoil to move upward for a head shot.

6. Distance: The amount of recoil compensation needed for an enemy that is close is different than would be needed if the enemy is a long range away.

7. Play style: If you are constantly using various weapons, styles, attachments, etc, it would very difficult to program all these types of parameters for every condition. If you play with the same gun(s), attachments, etc, it may be easier to determine a few recoil compensation parameters that work for the various scenarios.

8. Lag/Latency Compensation: This is a hot topic within the gaming community, but a true reality. The compensation has gotten better of the years but is still very unpredictable. Therefore, it makes it very difficult to get consistent results. You can play locally and get great results, but not be great while playing online with others/servers.

Detailed explanations of lag compensation:
http://en.wikipedia.org/wiki/Lag

https://developer.valvesoftware.com/wiki/Latency_Compensating_Methods_in_Client/Server_In-game_Protocol_Design_and_Optimization

Evaluation: How do you determine how much recoil there is on a certain weapon (with or without attachments)? You want a surface (walls, sides of trucks, etc.) in the game that will allow you to see the recoil pattern when shooting. Aim for chest height and simply press and hold the ADS and SHOOT buttons without any joystick movements. The bullet holes will show you the recoil pattern and severity. In COD Advanced Warfare, lane 8 of the firing range is great for this.

Detailed write up shared by another forum member.
http://denkirson.proboards.com/thread/5906

Bottom Line: The amount of recoil compensation is a personal preference and is affected by all the parameters above. You have to experiment and play around with the settings to meet your needs, style, weapon, etc.
Last edited by UK_Wildcats on Tue Jul 21, 2015 11:44 pm, edited 3 times in total.
User avatar
UK_Wildcats
Brigadier General
Brigadier General
 
Posts: 2243
Joined: Thu Jan 08, 2015 6:53 pm

Re: Recoil Compensation (aka Anti-Recoil)

Postby usuallyunusual » Thu Feb 19, 2015 7:17 pm

Nice post man
Image

Seeing Eye to Eye turned into an Eye for an Eye

Now everyones blind!
User avatar
usuallyunusual
Sergeant Major of the Army
Sergeant Major of the Army
 
Posts: 196
Joined: Sat Sep 06, 2014 6:37 pm

Re: Recoil Compensation (aka Anti-Recoil)

Postby UK_Wildcats » Thu Feb 19, 2015 7:24 pm

Thank you. I just wanted to help since there have been a lot of posts on anti-recoil lately.
User avatar
UK_Wildcats
Brigadier General
Brigadier General
 
Posts: 2243
Joined: Thu Jan 08, 2015 6:53 pm

Re: Recoil Compensation (aka Anti-Recoil)

Postby ernie41981 » Tue Mar 17, 2015 5:30 pm

ive tired a few of these secniaros was wondring if anyone plays cod aw what settings are you using i am mostly a rusher type player and use asm and bal primarily any help and input is appreciated thanks
User avatar
ernie41981
Sergeant First Class
Sergeant First Class
 
Posts: 22
Joined: Mon Feb 23, 2015 6:05 am

Re: Recoil Compensation (aka Anti-Recoil)

Postby UK_Wildcats » Tue Mar 17, 2015 5:38 pm

It is trial and error for each weapon, setup, attachments, sensitivity, etc. It will be different for each gun. To find the right settings for your specific needs, I recommend using firing range lane #8 and test it out for yourself. It is a stationary target that allows you to see the recoil pattern. I recommend using ADS and lining up your sights. Then fire with ADS and without touching any joystick. The higher the value, the more it tries to counter it. Remember to use inverted y if you use the in game option for look inversion. As the recoil is somewhat random, you just want to minimize it a little. Once you have a comfortable setting in firing range, go to a private match and test it out on bots.
User avatar
UK_Wildcats
Brigadier General
Brigadier General
 
Posts: 2243
Joined: Thu Jan 08, 2015 6:53 pm

Re: Recoil Compensation (aka Anti-Recoil)

Postby UK_Wildcats » Tue Jul 21, 2015 11:43 pm

Great write shared by another forum member.

http://denkirson.proboards.com/thread/5906
User avatar
UK_Wildcats
Brigadier General
Brigadier General
 
Posts: 2243
Joined: Thu Jan 08, 2015 6:53 pm


Return to Tutorials and FAQs

Who is online

Users browsing this forum: No registered users and 9 guests