Titan Two and Gtuner IV: PlayStation 5 and Xbox Series X|S

Tutorials, How-tos and FAQs for the Titan One device.

Re: Titan Two and Gtuner IV: PlayStation 5 and Xbox Series X

Postby UK_Wildcats_Fans » Sun Apr 25, 2021 2:47 pm

The T2 connected to PS5 and laptop. Input B is connected to Logitech G29, and Input A is connected to the DualSense Controller. It works well while I am using the controller. If I leave the system alone for a period of time (minutes), everything gets unresponsive (i.e. push buttons but nothing happens) as if the controller is completely disconnected from the T2. When this happens, the DualSense and G29 are both unresponsive. To resolve, I usually unplug the G29 from Input B and reconnect. Everything starts working again. This does not happen if I am actively using the controller.

Is anyone else experiencing this? Is there a way to fix this?
User avatar
UK_Wildcats_Fans
Brigadier General
Brigadier General
 
Posts: 2211
Joined: Thu Jan 08, 2015 6:53 pm
Location: San Diego, California USA

Re: Titan Two and Gtuner IV: PlayStation 5 and Xbox Series X

Postby zTuner » Thu Apr 29, 2021 4:50 am

I can’t get my T1 to work with my Hori Fighting Commander, anyone know where I can find a T2 for a reasonable price? Like $80 or so?
User avatar
zTuner
Master Sergeant
Master Sergeant
 
Posts: 40
Joined: Wed Jul 06, 2016 12:38 pm

Re: Titan Two and Gtuner IV: PlayStation 5 and Xbox Series X

Postby Gibbo McCool » Thu Apr 29, 2021 10:28 pm

I'm looking to use my Driving Force GT wheel with my PS5
I do have working but also have what seems like authentication issues after 10 minutes or so.

Firmware version 1.11.3.0
Have micro sd card installed/configured.
Have horo mini controller connected
The output protocol 'USB PlayStation 5' has buttons, brake and accelerator working ok , but no steering.
'USB Logitech Steering Wheel' does works (apart from gear stick) but it seems like i get authentication issues. Perhaps this output mode is not picking up that it needs authentication?
User avatar
Gibbo McCool
Private First Class
Private First Class
 
Posts: 3
Joined: Sun Mar 01, 2015 5:59 am

Re: Titan Two and Gtuner IV: PlayStation 5 and Xbox Series X

Postby Artimage » Thu May 06, 2021 2:17 pm

Guys my ps5 controller wont work if i connect titan2 to ps5 help please
User avatar
Artimage
Sergeant
Sergeant
 
Posts: 8
Joined: Thu May 06, 2021 2:15 pm

Re: Titan Two and Gtuner IV: PlayStation 5 and Xbox Series X

Postby Mad » Thu May 06, 2021 9:57 pm

Artimage wrote:Guys my ps5 controller wont work if i connect titan2 to ps5 help please

Have you set your output protocol in Gtuner>Device Configuration to USB Playstation 5?
And enabled wired communication?
First-time Configuration

On the PlayStation 5, enable wired communication:
Settings → Accessories → Controllers → Communication Method: USB .
Configure the Output Protocol of the Titan Two to USB Automatic or USB PlayStation 5.
ConsoleTuner Support Team || Discord || YouTube || Twitter
Mad
Major General
Major General
 
Posts: 3439
Joined: Wed May 22, 2019 5:39 am

Re: Titan Two and Gtuner IV: PlayStation 5 and Xbox Series X

Postby Psebcool » Wed May 12, 2021 3:53 pm

Hi everyone,

Step-by-step on how to test the PlayStation 5 output protocol (PASS THROUGH ONLY):
- On PS5 goto Settings -> Accessories -> Controllers -> Communication Method: USB
- Configure the Titan Two output protocol to "USB PlayStation 5" (enabled for beta testers only)
- Plug the DualSense to any input port of the Titan Two and the output port to PS5 console
- Press the PS button on the DualSense

At this point you should be able to operate the console normally. All DualSense features will work as expected (haptic feedback, adaptive triggers, speaker, mic, headset, touchpad, motion sensors, etc).


I would like to play with the Dualsense in passthrough and my xbox elite controller at the same time with the T2 on PS5.

Works, but I have no haptic feedback and no adaptive triggers working on the Dualsense. Even when the Dualsense is the only controller connected to T2.

Yet I checked and proceeded with all the steps listed in the quote above...

- I have the latest public firmware 1.11.3.0
- PS5 Communication Method is USB
- And here my T2 settings:
Image
Psebcool
Sergeant Major
Sergeant Major
 
Posts: 71
Joined: Mon Jun 22, 2015 7:41 pm

Previous

Return to Tutorials and FAQs

Who is online

Users browsing this forum: No registered users and 8 guests