Titan Two and Gtuner IV: PlayStation 5 and Xbox Series X|S

Tutorials, How-tos and FAQs for the Titan One device.

Re: Titan Two and Gtuner IV - 1.10 BETA Release (PS5 & XSX)

Postby CrsKy » Wed Nov 18, 2020 12:26 pm

Not working, Both the gamepad led and the comm led from xbox are red , I tried both versions 1.8 and 1.10 of the firmaware. With both gamepads old and new.. Please help
User avatar
CrsKy
Private First Class
Private First Class
 
Posts: 2
Joined: Sat Oct 12, 2019 6:46 am

Re: Titan Two and Gtuner IV - 1.10 BETA Release (PS5 & XSX)

Postby J2Kbr » Wed Nov 18, 2020 12:32 pm

Omnivirex wrote:Sytem PS4 pro Controller Xbox S / Xbox Elite V2 After this UPDATE the Syncing with new unsyncend controller ist not possible. If i press the sync button on the wirless adapter (new version- slim) it doesn light up
however all light are green The titan two is on the latest firmare and the controllers aswell. all conetions are propper.
i tested the firmare for an old snyced controller and must say you fucked it up this time so hard. when i press LT and RT at the same time the share button function activates.

First be sure your Xbox controller is updated (we are not supporting Xbox controllers with old firmware). To update your controller please follow the instruction described in the following page, if possible, proceed with the update using the Xbox console.

https://www.businessinsider.com/how-to- ... controller

The wireless pairing using the Xbox Adapter was removed on the 1.8 FW update. To pair the controller just plug it to the Titan Two using the USB cable, wait couple seconds, unplug the cable and press the Xbox button on the controller to start the wireless connection with the Adapter plugged to the device.

https://www.consoletuner.com/wiki/index ... ss_adapter
ConsoleTuner Support Team
User avatar
J2Kbr
General of the Army
General of the Army
 
Posts: 20323
Joined: Tue Mar 18, 2014 1:39 pm

Re: Titan Two and Gtuner IV - 1.10 BETA Release (PS5 & XSX)

Postby J2Kbr » Wed Nov 18, 2020 12:48 pm

BlessUp wrote:I was able to get the series x controller to finally sync but the only way I can make it work is the same way i got the apex to work.

@BlessUp: While we wait for the XSX update. Please capture the USB data traffic of your XSX controller with XSX console, it may be helpful for debug this issue.

For that proceed as the following:

1) Set the device's output protocol to "USB Xbox Series X|S";
2) Unplug all controllers from the Titan Two;
3) Connect the output to the XSX console;
4) Connect the Prog port to your computer;
5) Open Gtuner IV and go to top menu Tools -> "Fetch Descriptors ...";
6) Plug the XSX controller to any port at the front of the Titan Two;
7) Wait couple seconds for this window be updated with the captured data;
8) Click on the button "Copy Descriptors" and post here or PM me (you may need save into txt file and zip the to make smaller).

Thank you.
ConsoleTuner Support Team
User avatar
J2Kbr
General of the Army
General of the Army
 
Posts: 20323
Joined: Tue Mar 18, 2014 1:39 pm

Re: Titan Two and Gtuner IV - 1.10 BETA Release (PS5 & XSX)

Postby Bagura32rus » Wed Nov 18, 2020 3:02 pm

J2Kbr wrote:
BlessUp wrote:I was able to get the series x controller to finally sync but the only way I can make it work is the same way i got the apex to work.

@BlessUp: While we wait for the XSX update. Please capture the USB data traffic of your XSX controller with XSX console, it may be helpful for debug this issue.

For that proceed as the following:

1) Set the device's output protocol to "USB Xbox Series X|S";
2) Unplug all controllers from the Titan Two;
3) Connect the output to the XSX console;
4) Connect the Prog port to your computer;
5) Open Gtuner IV and go to top menu Tools -> "Fetch Descriptors ...";
6) Plug the XSX controller to any port at the front of the Titan Two;
7) Wait couple seconds for this window be updated with the captured data;
8) Click on the button "Copy Descriptors" and post here or PM me (you may need save into txt file and zip the to make smaller).

Thank you.

[USB DESCRIPTOR]
12 01 00 02 FF 47 D0 40 5E 04 12 0B 05 05 01 02 03 01 09 02 77 00 03 01 00 A0 FA 09 04 00 00 02 FF 47 D0 00 07 05 02 03 40 00 04 07 05 82 03 40 00 04 09 04 00 01 02 FF 47 D0 00 07 05 02 03 40 00 04 07 05 82 03 40 00 02 09 04 01 00 00 FF 47 D0 00 09 04 01 01 02 FF 47 D0 00 07 05 03 01 E4 00 01 07 05 83 01 40 00 01 09 04 02 00 00 FF 47 D0 00 09 04 02 01 02 FF 47 D0 00 07 05 04 02 40 00 00 07 05 84 02 40 00 00

[STRING 1 DESCRIPTOR]
00 00 00 02 00 00 02 01 80 06 03 01 04 09 00 14
14 03 4D 00 69 00 63 00 72 00 6F 00 73 00 6F 00 66 00 74 00

[STRING 2 DESCRIPTOR]
00 00 00 02 00 00 02 01 80 06 03 02 04 09 00 16
16 03 43 00 6F 00 6E 00 74 00 72 00 6F 00 6C 00 6C 00 65 00 72 00

[STRING 3 DESCRIPTOR]
00 00 00 02 00 00 02 01 80 06 03 03 04 09 00 3A
3A 03 33 00 30 00 33 00 39 00 33 00 37 00 33 00 31 00 33 00 33 00 33 00 36 00 33 00 30 00 33 00 36 00 33 00 35 00 33 00 39 00 33 00 36 00 33 00 30 00 33 00 33 00 33 00 31 00

[USB SNIFF]
00 00 00 01 00 00 01 00 80 06 01 00 00 00 00 40
00 00 00 02 00 00 02 01 80 06 01 00 00 00 00 40
12 01 00 02 FF 47 D0 40 5E 04 12 0B 05 05 01 02 03 01
00 00 00 01 00 00 01 00 00 05 00 7A 00 00 00 00
00 00 00 02 00 00 02 01 00 05 00 03 00 00 00 00
7A
00 00 00 01 00 00 01 00 80 06 01 00 00 00 00 12
00 00 00 02 00 00 02 01 80 06 01 00 00 00 00 12
12 01 00 02 FF 47 D0 40 5E 04 12 0B 05 05 01 02 03 01
00 00 00 01 00 00 01 00 80 06 02 00 00 00 00 FF
00 00 00 02 00 00 02 01 80 06 02 00 00 00 00 FF
09 02 77 00 03 01 00 A0 FA 09 04 00 00 02 FF 47 D0 00 07 05 02 03 40 00 04 07 05 82 03 40 00 04 09 04 00 01 02 FF 47 D0 00 07 05 02 03 40 00 04 07 05 82 03 40 00 02 09 04 01 00 00 FF 47 D0 00 09 04 01 01 02 FF 47 D0 00 07 05 03 01 E4 00 01 07 05 83 01 40 00 01 09 04 02 00 00 FF 47 D0 00 09 04 02 01 02 FF 47 D0 00 07 05 04 02 40 00 00 07 05 84 02 40 00 00
00 00 00 01 00 00 01 00 80 06 03 03 04 09 00 FF
00 00 00 02 00 00 02 01 80 06 03 03 04 09 00 FF
3A 03 33 00 30 00 33 00 39 00 33 00 37 00 33 00 31 00 33 00 33 00 33 00 36 00 33 00 30 00 33 00 36 00 33 00 35 00 33 00 39 00 33 00 36 00 33 00 30 00 33 00 33 00 33 00 31 00
00 00 00 01 00 00 01 00 80 06 03 00 00 00 00 FF
00 00 00 02 00 00 02 01 80 06 03 00 00 00 00 FF
04 03 09 04
00 00 00 01 00 00 01 00 80 06 03 02 04 09 00 FF
00 00 00 02 00 00 02 01 80 06 03 02 04 09 00 FF
16 03 43 00 6F 00 6E 00 74 00 72 00 6F 00 6C 00 6C 00 65 00 72 00
00 00 00 01 00 00 01 00 80 06 06 00 00 00 00 0A
00 00 00 02 00 00 02 02 80 06 06 00 00 00 00 0A
User avatar
Bagura32rus
Sergeant Major
Sergeant Major
 
Posts: 73
Joined: Fri Dec 21, 2018 9:37 pm
Location: RUSSIA

Re: Titan Two and Gtuner IV - 1.10 BETA Release (PS5 & XSX)

Postby Bagura32rus » Wed Nov 18, 2020 3:49 pm

BlessUp wrote:I am able to see buttons being pressed on device monitor but they are not passing through to the xbox. But here is what I discovered and was able to get it to sync but still loses sync on power off. I have the xim apex and it has the same issue so I copy pasted how i got it to sync and the Titan 2 is having the same exact issue so if you read below just replace xim with titan and its operating the same.

I was able to get the series x controller to finally sync but the only way I can make it work is the same way i got the apex to work.

Something very strange is happening with the series X controller. I was able to get it connected to xim apex and have it show the key presses in xim manager but the button presses would not register to the series x system. Buttons pressed dirctly on the controller also would not register. I then pressed the sync button on controller and then sync button on xbox seriex x and the controller buttons directly pressed worked on console but keyboard and mouse buttons would not. Using the controller I reset the xbox and now everything appears to be functioning properly except for having to repeat the syncing to xbox and reboot using physical controller after powering off and back on xbox. I also noticed I have to keep the controller on when I do the reset from controller otherwise the controller doesnt automatically turn back on during boot and when I manually turn it on it will not sync. I have to sync controller to xbox then reboot using controller and leaving controller powered on it will sync during xbox boot. After its synced liked this I can unplug conroller and plug back in and it will resync but if I reboot or power off and dont leave controller on it will not sync and I have to do the sync controller to xbox and reboot using controller process described above.

Thanks a lot, it worked for me. work titan 2 and xim apex
User avatar
Bagura32rus
Sergeant Major
Sergeant Major
 
Posts: 73
Joined: Fri Dec 21, 2018 9:37 pm
Location: RUSSIA

Re: Titan Two and Gtuner IV - 1.10 BETA Release (PS5 & XSX)

Postby Elissen » Wed Nov 18, 2020 4:57 pm

Ive just received the Titan 2 today and trying to set is up using the xim apec on XBX.

Hardware wise i got the mouse and keyboard and XBX controller in the XIM hub --> XIM apex --> Titan two slot A, --> Output into xbox usb.

My Xim works fine and i got all data in game normally if i play with out without titan 2.

the problem comes with the consoletuner.
The beta version keeps downloading and updating as soon as i try to connect the Titan 2 to my pc, latest firmware version is 1.8.3.1, and its trying to update firmware to 1.8.3.1, after i did that (nothing changes obviously), at the top right, i try to select the usb and it goes back into the update screen agian. On the non beta version it works but i cant get some of the functions to work like orbital aim assistance.
Ive also got the bluetooth connection but im using that for script adjustments over my phone, everything else is wired through usb.

So im looking for a script that works on cold war, orbital aim assistance and maybe a recoil control, but i can only get scripts working with either 1 of those 2. Is this because of the consoletuner being the normal version and not the beta?
User avatar
Elissen
Private
Private
 
Posts: 1
Joined: Wed Nov 18, 2020 4:48 pm

Re: Titan Two and Gtuner IV - 1.10 BETA Release (PS5 & XSX)

Postby Mad » Wed Nov 18, 2020 7:39 pm

Elissen wrote:So im looking for a script that works on cold war, orbital aim assistance and maybe a recoil control, but i can only get scripts working with either 1 of those 2. Is this because of the consoletuner being the normal version and not the beta?

When anti recoil is activate, aim assist will be disabled. Aim assist is active when the left trigger is held. If you check device monitor while holding the left trigger only, and the right sticks are moving you are good to go - if not you may need to increase the stick noise option in the script you are using.
ConsoleTuner Support Team || ConsoleTuner Discord || InputSense Discord (2K / FPS)
Mad
Major General
Major General
 
Posts: 4532
Joined: Wed May 22, 2019 5:39 am

Re: Titan Two and Gtuner IV - 1.10 BETA Release (PS5 & XSX)

Postby rabbitevelin » Thu Nov 19, 2020 1:39 am

Please forgive me, I am brand-new at this. I have been reading the forums and finally took a plunge into buying a Titan two. I have an Xbox adaptive controller, and I just bought a PlayStation 5. I'm trying to get it all to work. Does this new beta release help? I am assuming the Xbox adaptive controller works like an Xbox one controller? Is there anything I need to know? Thank you for helping me.
User avatar
rabbitevelin
Private First Class
Private First Class
 
Posts: 3
Joined: Thu Nov 19, 2020 1:33 am

Re: Titan Two and Gtuner IV - 1.10 BETA Release (PS5 & XSX)

Postby ThisGuy » Thu Nov 19, 2020 2:50 am

So I have been talking with BlessUp on the xim forums and I have been somewhat having the same issue with a little different twist. I am using xim/titan 2 combo. I tested xim by itself and titan 2 by itself, no issue with either but when I combined them I get a weird issue with communication and it will start to spin out and run forward then my series X turns off. If I can unplug the titan from the Xbox and the controller then I don’t have syncing issue after I turn it back on. But if I let it ride out when the power shuts off my controller will then be off sync with my Xbox and titan 2/xim. So for now I will just use my xim as the 2 together crash my series X and that isn’t good.

I am running both most recent beta firmware on both. Another weird thing is this seems to only happen while playing rainbow six siege with the siege game pack.

Oh and one more thing I have been able to use this combo with other games and no issue, but it will shut down every time with siege. Have also used with call of duty warzone and rogue company as well as Pubg and those games didn’t shut down my series X. So maybe for me it’s the game pack of siege. I am tired of testing all the variables because it keeps shutting down my Xbox and eventually it could brick it and I do t want to risk it.

Just noticed I had an older version of the game pack running maybe that’s why? I don’t use my titan for all the games I play so I thought I would try it out with some other games which is how I found this siege issue.

One last add on this doesn’t seem to happen with regular Xbox controller as I played siege for an hour with it no issue.
Last edited by ThisGuy on Thu Nov 19, 2020 5:33 am, edited 1 time in total.
User avatar
ThisGuy
Sergeant
Sergeant
 
Posts: 9
Joined: Mon Sep 23, 2019 1:42 am

Re: Titan Two and Gtuner IV - 1.10 BETA Release (PS5 & XSX)

Postby Bagura32rus » Thu Nov 19, 2020 4:33 am

J2Kbr wrote:Thank you. today I will be investigating the cause for this issue.

I still managed to get titan working, after the Xbox Series X was completely finished, I plugged the joystick into the Titan and turned on the console together and it worked!
User avatar
Bagura32rus
Sergeant Major
Sergeant Major
 
Posts: 73
Joined: Fri Dec 21, 2018 9:37 pm
Location: RUSSIA

PreviousNext

Return to Tutorials and FAQs

Who is online

Users browsing this forum: No registered users and 146 guests