Titan Two and Gtuner IV: PlayStation 5 and Xbox Series X|S

Tutorials, How-tos and FAQs for the Titan One device.

Re: Titan Two and Gtuner IV: PlayStation 5 and Xbox Series X

Postby Oakengunter » Sat Jan 30, 2021 3:41 pm

Mad wrote:
Oakengunter wrote:What do I need to use the PS5 Controller wireless in combination to the PS5 ?

https://www.consoletuner.com/wiki/index ... _bluetooth


Hey,
Thanks First,
But thats a Link for a PS4 Controller.
The Link for PS5 Controller does Not work.

What is with the PS5 Dual Sense Controller?
Does it work with the Titan Two ? An what do i Need for ?
What is about the Audio via PS5 Dual Sense Controller?
Does it work via Titan Two ?

Thanks.... :-)
User avatar
Oakengunter
Private First Class
Private First Class
 
Posts: 3
Joined: Fri Jan 29, 2021 1:15 pm

Re: Titan Two and Gtuner IV: PlayStation 5 and Xbox Series X

Postby J2Kbr » Sat Jan 30, 2021 3:58 pm

ogpain wrote:
J2Kbr wrote:
ogpain wrote:Latest 1.10.3.2 update, very high cpu usage? Edit: without any packs loaded it seems ok at 2%, but just about all scripts show roughly double the cpu usage increase

CPU load around 5% is normal and will not cause any latency issue. Specially when using mouse translator and controller headset, 5% is normal. :smile0517:


Most of the actively updated gamepacks are hovering over 30% at idle

30% is not normal (unless with some few heavy CPU demanding scripts).

What are the devices you have connected into your Titan Two? And what is the script and input translator you are using? I will try reproduce what you are experiencing. Thanks.
ConsoleTuner Support Team
User avatar
J2Kbr
General of the Army
General of the Army
 
Posts: 20330
Joined: Tue Mar 18, 2014 1:39 pm

Re: Titan Two and Gtuner IV: PlayStation 5 and Xbox Series X

Postby J2Kbr » Sat Jan 30, 2021 4:01 pm

Maxxgold wrote:
Chad20 wrote:I’m using a XIM with t2 and the only 3rd party controller I have is a scuff impact, will this work without the disconnect? If so can you tell me how to connect everything on ps5? Thanks

I’m not sure if your scuff controller will work, but, this is how you set it up.
viewtopic.php?f=20&t=17129

Scuf Vantage and Vantage 2 works for PS5 game authentication. The Scuf Impact and Infinity will not work, these are regular DualShock 4 controller inside, therefore a first-party controller.
ConsoleTuner Support Team
User avatar
J2Kbr
General of the Army
General of the Army
 
Posts: 20330
Joined: Tue Mar 18, 2014 1:39 pm

Re: Titan Two and Gtuner IV: PlayStation 5 and Xbox Series X

Postby J2Kbr » Sat Jan 30, 2021 4:02 pm

Gobot wrote:I'm on the most recent version and I still have the controller disconnect issue at 7 minutes 30 seconds

What are the controllers you have plugged on the Titan Two? Thanks.
ConsoleTuner Support Team
User avatar
J2Kbr
General of the Army
General of the Army
 
Posts: 20330
Joined: Tue Mar 18, 2014 1:39 pm

Re: Titan Two and Gtuner IV: PlayStation 5 and Xbox Series X

Postby J2Kbr » Sat Jan 30, 2021 4:08 pm

Oakengunter wrote:But thats a Link for a PS4 Controller. The Link for PS5 Controller does Not work.

We are working on the documentation page related with DualSense. Should be available soon. :smile0517:

Oakengunter wrote:What is with the PS5 Dual Sense Controller?
Does it work with the Titan Two ? An what do i Need for ?

Yes, you can use the DualSense wirelessly with the Titan Two. The Bluetooth pairing procedure for DualSense is the same as the one for DualShock 4.

Oakengunter wrote:What is about the Audio via PS5 Dual Sense Controller?
Does it work via Titan Two ?

Currently, the controller headset will not work with DualSense. We will be adding support for controller headset with DualSense in a future firmware udpate.
ConsoleTuner Support Team
User avatar
J2Kbr
General of the Army
General of the Army
 
Posts: 20330
Joined: Tue Mar 18, 2014 1:39 pm

Re: Titan Two and Gtuner IV: PlayStation 5 and Xbox Series X

Postby Glooper » Mon Feb 01, 2021 2:42 am

Will a compatible PS4 controller always be required, or might the DualSense authenticate other controllers without timeouts in future?
User avatar
Glooper
Staff Sergeant
Staff Sergeant
 
Posts: 10
Joined: Sun May 15, 2016 2:33 am

Re: Titan Two and Gtuner IV: PlayStation 5 and Xbox Series X

Postby BobbleBobble » Tue Feb 02, 2021 7:00 am

J2Kbr wrote:
m1xeD wrote:Hello I play warzone on the ps5 and use the xim 4 with the playstation 4 controller with the Titan 2. I installed the new firmware the day before yesterday. Since then I have to disconnect the ps5 every 8 minutes and plug it back into the USB port.
It worked the whole time until I installed the new firmware on the Titan.

Can anyone help me?
Do I now need the hori mini controller with the new firmware update? Since it worked before the update

The problem with this setup is that XIM also reports itself as a third-party PS4 controller, therefore the Titan Two will redirect the auth packets to it if the first detected device is XIM.

The solution is:
- Connect the Titan Two output port to the PS5 console;
- Connect a PS4 third-party controller to Input-B, wait couple seconds;
- Connect XIM at Input-A of the Titan Two.


Will this be fixed? Perhaps an option to always auth on USB-B ?
User avatar
BobbleBobble
Private
Private
 
Posts: 1
Joined: Tue Jan 01, 2019 2:17 am

Re: Titan Two and Gtuner IV: PlayStation 5 and Xbox Series X

Postby J2Kbr » Thu Feb 04, 2021 1:47 pm

Glooper wrote:Will a compatible PS4 controller always be required, or might the DualSense authenticate other controllers without timeouts in future?

We plan, if a solution is eventually found, fully emulate the DualSense protocol. With that a DualSense controller will be required for PS5 authentication.
ConsoleTuner Support Team
User avatar
J2Kbr
General of the Army
General of the Army
 
Posts: 20330
Joined: Tue Mar 18, 2014 1:39 pm

Re: Titan Two and Gtuner IV: PlayStation 5 and Xbox Series X

Postby J2Kbr » Thu Feb 04, 2021 1:48 pm

BobbleBobble wrote:
J2Kbr wrote:
m1xeD wrote:Hello I play warzone on the ps5 and use the xim 4 with the playstation 4 controller with the Titan 2. I installed the new firmware the day before yesterday. Since then I have to disconnect the ps5 every 8 minutes and plug it back into the USB port.
It worked the whole time until I installed the new firmware on the Titan.

Can anyone help me?
Do I now need the hori mini controller with the new firmware update? Since it worked before the update

The problem with this setup is that XIM also reports itself as a third-party PS4 controller, therefore the Titan Two will redirect the auth packets to it if the first detected device is XIM.

The solution is:
- Connect the Titan Two output port to the PS5 console;
- Connect a PS4 third-party controller to Input-B, wait couple seconds;
- Connect XIM at Input-A of the Titan Two.


Will this be fixed? Perhaps an option to always auth on USB-B ?

Please check with the latest XIM update (maybe still in beta). With that third-party PS4 controller can be used on XIM. :smile0517:
ConsoleTuner Support Team
User avatar
J2Kbr
General of the Army
General of the Army
 
Posts: 20330
Joined: Tue Mar 18, 2014 1:39 pm

Re: Titan Two and Gtuner IV: PlayStation 5 and Xbox Series X

Postby flyersrule » Thu Feb 04, 2021 5:18 pm

do headsets work on ps5 while wired to controller
User avatar
flyersrule
Staff Sergeant
Staff Sergeant
 
Posts: 14
Joined: Thu Oct 15, 2020 8:12 pm

PreviousNext

Return to Tutorials and FAQs

Who is online

Users browsing this forum: No registered users and 6 guests