Page 70 of 88

Re: Titan Two and Gtuner IV: PlayStation 5 and Xbox Series X

PostPosted: Sun Apr 25, 2021 2:47 pm
by UK_Wildcats
The T2 connected to PS5 and laptop. Input B is connected to Logitech G29, and Input A is connected to the DualSense Controller. It works well while I am using the controller. If I leave the system alone for a period of time (minutes), everything gets unresponsive (i.e. push buttons but nothing happens) as if the controller is completely disconnected from the T2. When this happens, the DualSense and G29 are both unresponsive. To resolve, I usually unplug the G29 from Input B and reconnect. Everything starts working again. This does not happen if I am actively using the controller.

Is anyone else experiencing this? Is there a way to fix this?

Re: Titan Two and Gtuner IV: PlayStation 5 and Xbox Series X

PostPosted: Thu Apr 29, 2021 4:50 am
by zTuner
I can’t get my T1 to work with my Hori Fighting Commander, anyone know where I can find a T2 for a reasonable price? Like $80 or so?

Re: Titan Two and Gtuner IV: PlayStation 5 and Xbox Series X

PostPosted: Thu Apr 29, 2021 10:28 pm
by Gibbo McCool
I'm looking to use my Driving Force GT wheel with my PS5
I do have working but also have what seems like authentication issues after 10 minutes or so.

Firmware version 1.11.3.0
Have micro sd card installed/configured.
Have horo mini controller connected
The output protocol 'USB PlayStation 5' has buttons, brake and accelerator working ok , but no steering.
'USB Logitech Steering Wheel' does works (apart from gear stick) but it seems like i get authentication issues. Perhaps this output mode is not picking up that it needs authentication?

Re: Titan Two and Gtuner IV: PlayStation 5 and Xbox Series X

PostPosted: Thu May 06, 2021 2:17 pm
by Artimage
Guys my ps5 controller wont work if i connect titan2 to ps5 help please

Re: Titan Two and Gtuner IV: PlayStation 5 and Xbox Series X

PostPosted: Thu May 06, 2021 9:57 pm
by Mad
Artimage wrote:Guys my ps5 controller wont work if i connect titan2 to ps5 help please

Have you set your output protocol in Gtuner>Device Configuration to USB Playstation 5?
And enabled wired communication?
First-time Configuration

On the PlayStation 5, enable wired communication:
Settings → Accessories → Controllers → Communication Method: USB .
Configure the Output Protocol of the Titan Two to USB Automatic or USB PlayStation 5.

Re: Titan Two and Gtuner IV: PlayStation 5 and Xbox Series X

PostPosted: Wed May 12, 2021 3:53 pm
by Psebcool
Hi everyone,

Step-by-step on how to test the PlayStation 5 output protocol (PASS THROUGH ONLY):
- On PS5 goto Settings -> Accessories -> Controllers -> Communication Method: USB
- Configure the Titan Two output protocol to "USB PlayStation 5" (enabled for beta testers only)
- Plug the DualSense to any input port of the Titan Two and the output port to PS5 console
- Press the PS button on the DualSense

At this point you should be able to operate the console normally. All DualSense features will work as expected (haptic feedback, adaptive triggers, speaker, mic, headset, touchpad, motion sensors, etc).


I would like to play with the Dualsense in passthrough and my xbox elite controller at the same time with the T2 on PS5.

Works, but I have no haptic feedback and no adaptive triggers working on the Dualsense. Even when the Dualsense is the only controller connected to T2.

Yet I checked and proceeded with all the steps listed in the quote above...

- I have the latest public firmware 1.11.3.0
- PS5 Communication Method is USB
- And here my T2 settings:
Image

Re: Titan Two and Gtuner IV: PlayStation 5 and Xbox Series X

PostPosted: Fri May 21, 2021 1:51 pm
by Sithgear
Hi guys,

I’m on ps5, titan two set on ps5.

I’m willing to use XIM apex with titan two but it seems i have a problem with my Nacon pro controller 3 (connected to the XIM hub), it’s getting power but wont connect.

Do i still need to install the beta firmware or is it working with the full release now?

The link to download gtuner 1.10b is not working

Thx

Edit: managed to make something to work…

Ps4 controller (v1), mnk to XIM apex
XIM apex to titan two (input A)
Nacon pro controller V3 to titan two (input B)
Titan two to ps5

Is that a good way to connect?
What else can i do… it’s LOT of stuff on my Desk now… lol

Re: Titan Two and Gtuner IV: PlayStation 5 and Xbox Series X

PostPosted: Sat May 29, 2021 10:32 pm
by UK_Wildcats
UK_Wildcats_Fans wrote:The T2 connected to PS5 and laptop. Input B is connected to Logitech G29, and Input A is connected to the DualSense Controller. It works well while I am using the controller. If I leave the system alone for a period of time (minutes), everything gets unresponsive (i.e. push buttons but nothing happens) as if the controller is completely disconnected from the T2. When this happens, the DualSense and G29 are both unresponsive. To resolve, I usually unplug the G29 from Input B and reconnect. Everything starts working again. This does not happen if I am actively using the controller.

Is anyone else experiencing this? Is there a way to fix this?


Now with more time playing, it is happening even while I am using the controller.

Re: Titan Two and Gtuner IV: PlayStation 5 and Xbox Series X

PostPosted: Sun May 30, 2021 6:19 am
by Debu_Ranger
What are the bug fixes on 1.11.3.0?

Re: Titan Two and Gtuner IV: PlayStation 5 and Xbox Series X

PostPosted: Sun May 30, 2021 8:11 pm
by UK_Wildcats
Debu_Ranger wrote:What are the bug fixes on 1.11.3.0?


You can see the latest changelog in the link below. The dates for 11.3 are the same as those listed in the changelog, so I am assuming that they were probably quickly done to fix a quick issue with 11-1.

https://www.consoletuner.com/titan-two-downloads/