Page 1 of 2

[XBOX ONE] Problems with other controllers? - FIX INSIDE!!

PostPosted: Tue Jun 09, 2015 5:44 am
by perfecthuntr
Here is a post that was made by @J2Kbr regarding the recent problems we've been seeing with Titan One users that are using the Xbox One *console* with any controllers other than the official Xbox One controller (e.g., DualShock 4 or Xbox 360). The most recent update to the Xbox One made some changes to the way that the controllers interact with the console. This causes the Xbox One controller to automatically re-authenticate with the Xbox One right after the Titan One authentication. The solution is to make sure your Xbox One controller is powered down after it authenticates the Titan One. @J2Kbr is working on a more elegant solution to this!

The best way to fix this issue is to remove the batteries from your Xbox One controller before using it for authentication!

J2Kbr wrote:Confirmed. the latest XB1 update changed how the connection controller/console is handled. I'm investigating it and working to fix.

As a temporary workaround make sure to turn off the XB1 controller before unplug it from the Titan One. It can be done using the Device Monitor or by the script below (pressing A after the authentication).

Code: Select all
main {
    if(event_press(XB1_A)) {
        turn_off();
    }
}

EDIT: Another solution would be remove the battery from the XBox One controller, doing so the controller can not connect to the console wirelessy.

The problem happens when the controller detects the usb cable was disconnected and try connect to the console wirelessly. Before the update this was not a problem because the USB connection had higher priority, but seems the update changed that, favoring the wireless connection over the usb connection.

Re: [XBOX ONE] Problems with other controllers? - FIX INSIDE

PostPosted: Tue Jun 09, 2015 3:11 pm
by UK_Wildcats
Good thinking

Re: [XBOX ONE] Problems with other controllers? - FIX INSIDE

PostPosted: Wed Jun 10, 2015 2:18 pm
by J2Kbr
Thanks perfecthuntr for clarify this issue. I couldn't do better!! :)

Re: [XBOX ONE] Problems with other controllers? - FIX INSIDE

PostPosted: Sun Jun 14, 2015 1:50 pm
by mindchamber
so is essentially the same problems I was having with the PS4 is now happening with the Xbone?

Re: [XBOX ONE] Problems with other controllers? - FIX INSIDE

PostPosted: Mon Jun 15, 2015 3:39 pm
by J2Kbr
mindchamber wrote:so is essentially the same problems I was having with the PS4 is now happening with the Xbone?

no, definitively it is not related ... your PS4 problem was solved?

Re: [XBOX ONE] Problems with other controllers? - FIX INSIDE

PostPosted: Fri Jun 19, 2015 2:17 am
by samurailjackson
Thank you for offering a fix, I just got my titan one today and I'm having issues with getting the menu, change view and guide buttons being mapped to the start, select and guide buttons on my Xbox 360 fight stick can anyone help with this?

Re: [XBOX ONE] Problems with other controllers? - FIX INSIDE

PostPosted: Fri Jun 19, 2015 2:44 pm
by J2Kbr
samurailjackson wrote:Thank you for offering a fix, I just got my titan one today and I'm having issues with getting the menu, change view and guide buttons being mapped to the start, select and guide buttons on my Xbox 360 fight stick can anyone help with this?

Hello, could you please post your request in the 'GPC Script Programming' section? so we can keep the subjects separately. Thanks.

Re: [XBOX ONE] Problems with other controllers? - FIX INSIDE

PostPosted: Fri Jun 19, 2015 9:27 pm
by samurailjackson
will do thanks!

Re: [XBOX ONE] Problems with other controllers? - FIX INSIDE

PostPosted: Wed Jun 24, 2015 12:11 pm
by Delta101
So Iv tried taking the battery's out then unplug and cut controller back on and nothing. I have the X1 also and I don't know what else to do to be honest. It just will. Not act right for me.

Re: [XBOX ONE] Problems with other controllers? - FIX INSIDE

PostPosted: Mon Jun 29, 2015 9:03 pm
by J2Kbr
Delta101 wrote:So Iv tried taking the battery's out then unplug and cut controller back on and nothing. I have the X1 also and I don't know what else to do to be honest. It just will. Not act right for me.

After you unplug the XB1 controller and connected the controller you wanna use, what is showing in the Titan One's display? (including if the top and bottom dots are on or off) - Thanks