[TUTORIALS] Beginners' Guide to the Titan One

Tutorials and Video Tutorials for Titan One device. Configurations, Console and Controller connections, Gamepacks settings, etc...

[TUTORIALS] Beginners' Guide to the Titan One

Postby UK_Wildcats_Fans » Thu Jun 11, 2015 1:17 am

GETTING TO KNOW THE TITAN 1 & TUTORIALS:

http://www.consoletuner.com/kbase/getting_to_know_your_device.htm

Titan 1 Device Tour youtube video


Great review and Tutorial by forum member Dave R


Online User Manual & Documentation
http://www.consoletuner.com/kbase/user_s_manual.htm?mw=MjQw&st=MA==&sct=MA==&ms=AAAA

Device Guides
http://www.consoletuner.com/kbase/device_guide.htm

Gamepack documentation
http://www.consoletuner.com/gtuner/gamepacks/

GPC Library (aka Script Library)
http://www.consoletuner.com/gpclib/

Gtuner Pro Beginner's guide youtube video


Gamepack configuration youtube video tutorial


Gtuner Visual Scripting Tour


Creating a simple script with Gtuner



PRELIMINARY SETUP:

Reference: http://www.consoletuner.com/kbase/basics_and_common_controls.htm
1. With Gtuner installed, go to Tools – Gtuner Update and ensure that you are running the latest version.
Note: If you just installed Gtuner, it should already be the latest version.
2. With a USB to Mini USB cable, plug the USB end into the computer and Mini USB into the PC PROG port of the Titan 1
http://www.consoletuner.com/kbase/pc_prog_interface.htm
3. Go to Tools – Firmware Update and ensure that the Titan 1 is updated with the latest firmware. If not, then update the firmware.


LOADING GAMEPACKS:

1. With the Titan 1 connected to the computer, go to the Gtuner “Programmer” tab
NOTE: With the Titan 1 connected to the computer Gtuner should automatically populate gamepacks. If not, it is not connected properly or there is a problem.
2. Select the desired gamepack and drag it to an open Device Memory Slot (i.e. slot 1)
3. This should open the gamepack configuration menu. If not, click the number to the left of the memory slot that you loaded the gamepack (i.e. “1”) which will open the gamepack configuration menu.
4. Open the gamepack documentation by clicking the button at the bottom-left of the configuration menu or by following the link above and then opening the specific gamepack documentation.
5. Read the documentation to fully understand the mods
6. Configure the gamepack with the mods that you desire. Yes, you can use multiple mods at a time.
http://www.consoletuner.com/kbase/gamepack_configuration.htm
Note: Ensure that you check “Include configuration when programming device”
7. Click Program Device to program the Titan 1 with the gamepack and your configuration
8. If no errors, you now have the Titan 1 programmed with the gamepack.
9. Follow the Console Turn On procedure below

Note: You can load multiple memory slots on the Titan 1; therefore, you can have various gamepacks and/or various configurations of the gamepack loaded into the memory slots. For example, slot 1 and 2 may be for Battlefield 4 but slot 1 has Rapid Fire and Drop Shot while slot 2 has Burst Fire.


LOADING SCRIPTS:

Note: Scripts do NOT have a mod configuration menu like gamepacks when you load them into memory slots. To learn how to activate mods for the script, you must read the actual script because each script is different.

1. Go to the “Online Library” tab of Gtuner
2. Download the script
3. Make the changes that you want using GPC Compiler
4. Press F7 to compile, look at the Output section at the bottom of screen. It should read "Build succeeded with 0 warnings..." if it is error free.
5. Save the script to your computer
6. Go to the Programmer tab
7. Drag your script that you saved from the Compiler Scripts section to an open Device Memory Slot (i.e. slot 1)
8. Click Program Device
9. If no errors, you now have the Titan 1 programmed with the script.
10. Follow the Console Turn On procedure below

Note: You can load multiple memory slots on the Titan 1; therefore, you can have various gamepacks, scripts and/or various configurations of the gamepack/scripts loaded into the memory slots. For example, slot 1 and 2 may be for Battlefield 4 but slot 1 has Rapid Fire and Drop Shot while slot 2 has Burst Fire.


CONSOLE TURN ON:

Preliminary: Always ensure that you follow the directions and procedures per the appropriate device guide per the above Device Guide link.
1. With the controller OFF and console OFF, turn on the console using the power button on the console (not controller)
2. Plug T1 into the console and wait for the A U to flash on the Titan 1
3. Plug in if hard wired or turn on Controller per the device guide if using a bluetooth adapter
4. Press the button on top of the Titan 1 until you get the desired Device Memory Slot (i.e. 1) number that you put the script or gamepack.
5. You are now ready to use the Titan 1 with your game


PAIRING YOUR DUALSHOCK 4 CONTROLLER OVER BLUETOOTH:
http://www.consoletuner.com/forum/viewtopic.php?f=18&t=1535#p11336

FIRMWARE RECOVERY:
http://www.consoletuner.com/kbase/firmware_recovery_mode.htm?mw=MjQw&st=MA==&sct=MA==&ms=AAAA
Last edited by UK_Wildcats_Fans on Wed Aug 05, 2015 11:19 pm, edited 5 times in total.
User avatar
UK_Wildcats_Fans
Brigadier General
Brigadier General
 
Posts: 2070
Joined: Thu Jan 08, 2015 6:53 pm
Location: San Diego, California USA

Re: [TUTORIALS] Beginners' Guide to the Titan One

Postby perfecthuntr » Thu Jun 11, 2015 2:54 am

Thanks for this! This is an EXCELLENT reference post for us to use! :smile0202: :smile0203:
ConsoleTuner Support Team
User avatar
perfecthuntr
Major
Major
 
Posts: 897
Joined: Wed Jan 14, 2015 8:35 am
Location: Tennessee

Re: [TUTORIALS] Beginners' Guide to the Titan One

Postby J2Kbr » Sat Jun 13, 2015 3:11 pm

Sure it is!! :) Thank you UK_Wildcats_Fans
ConsoleTuner Support Team
User avatar
J2Kbr
General of the Army
General of the Army
 
Posts: 17313
Joined: Tue Mar 18, 2014 1:39 pm

Re: [TUTORIALS] Beginners' Guide to the Titan One

Postby UK_Wildcats_Fans » Tue Jul 28, 2015 8:03 pm

Should we move this to the announcements section?
User avatar
UK_Wildcats_Fans
Brigadier General
Brigadier General
 
Posts: 2070
Joined: Thu Jan 08, 2015 6:53 pm
Location: San Diego, California USA

Re: [TUTORIALS] Beginners' Guide to the Titan One

Postby J2Kbr » Tue Jul 28, 2015 8:15 pm

good idea!
ConsoleTuner Support Team
User avatar
J2Kbr
General of the Army
General of the Army
 
Posts: 17313
Joined: Tue Mar 18, 2014 1:39 pm

Re: [TUTORIALS] Beginners' Guide to the Titan One

Postby UK_Wildcats_Fans » Fri Jul 31, 2015 4:33 pm

Added the latest youtube video on Creating a Simple Script with Gtuner.
User avatar
UK_Wildcats_Fans
Brigadier General
Brigadier General
 
Posts: 2070
Joined: Thu Jan 08, 2015 6:53 pm
Location: San Diego, California USA

Re: [TUTORIALS] Beginners' Guide to the Titan One

Postby stvbdkd » Tue Aug 04, 2015 6:03 am

Hey I'm problems with my titan one i did everything in the CONSOLE TURN ON: STEP controller is wired plug into the titan one input still flashing AU i also try pressing the button nothing.
User avatar
stvbdkd
Master Sergeant
Master Sergeant
 
Posts: 28
Joined: Mon Aug 03, 2015 8:52 pm

Re: [TUTORIALS] Beginners' Guide to the Titan One

Postby UK_Wildcats_Fans » Tue Aug 04, 2015 3:54 pm

stvbdkd wrote:Hey I'm problems with my titan one i did everything in the CONSOLE TURN ON: STEP controller is wired plug into the titan one input still flashing AU i also try pressing the button nothing.


What console? What controller?
User avatar
UK_Wildcats_Fans
Brigadier General
Brigadier General
 
Posts: 2070
Joined: Thu Jan 08, 2015 6:53 pm
Location: San Diego, California USA

Re: [TUTORIALS] Beginners' Guide to the Titan One

Postby stvbdkd » Thu Aug 06, 2015 2:11 pm

UK_Wildcats_Fans wrote:
stvbdkd wrote:Hey I'm problems with my titan one i did everything in the CONSOLE TURN ON: STEP controller is wired plug into the titan one input still flashing AU i also try pressing the button nothing.


What console? What controller?

PS4 and DS4 controller can you give me your device settings in gtuner software for authenticating the controller to the titan 1
User avatar
stvbdkd
Master Sergeant
Master Sergeant
 
Posts: 28
Joined: Mon Aug 03, 2015 8:52 pm

Re: [TUTORIALS] Beginners' Guide to the Titan One

Postby UK_Wildcats_Fans » Thu Aug 06, 2015 3:28 pm

Follow the guide below. The important Device Options are using PS4 or AUTOMATIC. If you have those settings and still have issues, try disabling all the speed up settings.

http://www.consoletuner.com/kbase/connecting_on_playstation_4.htm?mw=MjQw&st=MA==&sct=MA==&ms=AAAA
User avatar
UK_Wildcats_Fans
Brigadier General
Brigadier General
 
Posts: 2070
Joined: Thu Jan 08, 2015 6:53 pm
Location: San Diego, California USA

Next

Return to Tutorials and Video Tutorials

Who is online

Users browsing this forum: No registered users and 2 guests