Titan Two Firmware 1.05-BETA
Titan Two Firmware 1.05-BETA
Along with Gtuner IV 1.05, the Titan Two firmware 1.05 is available as beta release. In this version were made several changes on how the device works, optimizing CPU usage, improving performance and response time. It was also added an option to set/force the polling rate of input devices (side note: from all tested controllers, only the PS4 controller was capable to respond @ 1000Hz - all the others still send data reports at default speed).
FW 1.05B changelog:
* USB Output: Synchronization of output packets with the USB frame corresponding to the USB polling rate
* USB Output: Output LED turns orange to indicate buffering (not synced) is being used for output packets
* USB Host: Removed 2ms polling cap for HID devices, mice are now polled at 1000Hz {GitHub#220}
* VM: New inputs from devices are processed all together (at 500us mark), instead of one at a time
* PS4 Driver: Send requests to correct interface as specified in the controller's descriptors {GitHub#208,210}
* XB1 Driver: Fixed bug where isochronous and bulk interfaces were being polled even if non existent
* All Drivers: Added support for customizable input polling rates: 1000Hz, 500Hz, 250Hz and 125Hz
As result of the above, is expected XB1 and PS4 third-party controllers (e.g. Astro C40, Wolverine) to be fulling working.
To update your device with the beta firmware, proceed as the following:
1. Update Gtuner IV to 1.05
2. Go to the folder where Gtuner.exe is located
3. Find the file named “Gtuner.cfg” and open it on notepad or similar text editor
4. At the very end of the file, add the following
To rollback to the stable firmware:
1. set beta_tester= to false
2. put the Titan Two in programming mode and update as normal
--
I appreciate if you guys could test and give feedback.
Thank you.
FW 1.05B changelog:
* USB Output: Synchronization of output packets with the USB frame corresponding to the USB polling rate
* USB Output: Output LED turns orange to indicate buffering (not synced) is being used for output packets
* USB Host: Removed 2ms polling cap for HID devices, mice are now polled at 1000Hz {GitHub#220}
* VM: New inputs from devices are processed all together (at 500us mark), instead of one at a time
* PS4 Driver: Send requests to correct interface as specified in the controller's descriptors {GitHub#208,210}
* XB1 Driver: Fixed bug where isochronous and bulk interfaces were being polled even if non existent
* All Drivers: Added support for customizable input polling rates: 1000Hz, 500Hz, 250Hz and 125Hz
As result of the above, is expected XB1 and PS4 third-party controllers (e.g. Astro C40, Wolverine) to be fulling working.
To update your device with the beta firmware, proceed as the following:
1. Update Gtuner IV to 1.05
2. Go to the folder where Gtuner.exe is located
3. Find the file named “Gtuner.cfg” and open it on notepad or similar text editor
4. At the very end of the file, add the following
- Code: Select all
[Advanced]
beta_tester=true
To rollback to the stable firmware:
1. set beta_tester= to false
2. put the Titan Two in programming mode and update as normal
--
I appreciate if you guys could test and give feedback.
Thank you.
ConsoleTuner Support Team
-
J2Kbr - General of the Army
- Posts: 20323
- Joined: Tue Mar 18, 2014 1:39 pm
Re: Titan Two Firmware 1.05-BETA (FEEDBACK NEEDED)
Tools-Check 4 Updates Result:
-
Scachi - Brigadier General
- Posts: 3044
- Joined: Wed May 11, 2016 6:25 am
- Location: Germany
Re: Titan Two Firmware 1.05-BETA (FEEDBACK NEEDED)
Error fixed, please try again. Thanks.
ConsoleTuner Support Team
-
J2Kbr - General of the Army
- Posts: 20323
- Joined: Tue Mar 18, 2014 1:39 pm
Re: Titan Two Firmware 1.05-BETA (FEEDBACK NEEDED)
J2Kbr wrote:Error fixed, please try again. Thanks.
yes, it worked fine now. Update completed.
-
Scachi - Brigadier General
- Posts: 3044
- Joined: Wed May 11, 2016 6:25 am
- Location: Germany
Re: Titan Two Firmware 1.05-BETA (FEEDBACK NEEDED)
Downloading and updating now. I will start testing this afternoon or tomorrow.
What are the PS4 default polling rates?
What are the PS4 default polling rates?
-
UK_Wildcats - Brigadier General
- Posts: 2243
- Joined: Thu Jan 08, 2015 6:53 pm
Re: Titan Two Firmware 1.05-BETA (FEEDBACK NEEDED)
For anyone struggling on Mac the Gtuner.cfg is here.
You have to show hidden files first Shift + Command + >
Macintosh HD ▸ Users ▸ (UserName) ▸ Library ▸ Application Support ▸ Gtuner
You have to show hidden files first Shift + Command + >
Macintosh HD ▸ Users ▸ (UserName) ▸ Library ▸ Application Support ▸ Gtuner
-
ChrisWAFC - Private
- Posts: 1
- Joined: Wed Sep 04, 2019 7:22 pm
Re: Titan Two Firmware 1.05-BETA (FEEDBACK NEEDED)
All right, update done. I will give feedback.
Thanks J2Kbr !
Thanks J2Kbr !
-
alanmcgregor - Major
- Posts: 995
- Joined: Tue Mar 27, 2018 8:38 am
Re: Titan Two Firmware 1.05-BETA (FEEDBACK NEEDED)
ChrisWAFC wrote:For anyone struggling on Mac the Gtuner.cfg is here.
You have to show hidden files first Shift + Command + >
Macintosh HD ▸ Users ▸ (UserName) ▸ Library ▸ Application Support ▸ Gtuner
Thank you for the configuration instructions on Mac. Appreciated. ;)
ConsoleTuner Support Team
-
J2Kbr - General of the Army
- Posts: 20323
- Joined: Tue Mar 18, 2014 1:39 pm
Re: Titan Two Firmware 1.05-BETA (FEEDBACK NEEDED)
J2Kbr?
Any particular thing you want us to try or keep an eye on?
Any particular thing you want us to try or keep an eye on?
-
alanmcgregor - Major
- Posts: 995
- Joined: Tue Mar 27, 2018 8:38 am
Re: Titan Two Firmware 1.05-BETA (FEEDBACK NEEDED)
Basically 3 points:
1) everything is working expected?
2) can be noticed (for good or bad) any difference on performance/response time/lag/cpu load?
3) any controller that before was not working, is now working?
Thanks.
1) everything is working expected?
2) can be noticed (for good or bad) any difference on performance/response time/lag/cpu load?
3) any controller that before was not working, is now working?
Thanks.
ConsoleTuner Support Team
-
J2Kbr - General of the Army
- Posts: 20323
- Joined: Tue Mar 18, 2014 1:39 pm
Return to News and Announcements
Who is online
Users browsing this forum: cpacebr and 61 guests