Titan Two Firmware 1.05-BETA
Re: Titan Two Firmware 1.05-BETA (FEEDBACK NEEDED)
J2kbr, is the c40 suppose work without DS needed at all? Just plug and play?
-
semo - Corporal
- Posts: 5
- Joined: Sun Mar 30, 2014 11:54 pm
Re: Titan Two Firmware 1.05-BETA (FEEDBACK NEEDED)
semo wrote:J2kbr, is the c40 suppose work without DS needed at all? Just plug and play?
Some changes were made which can make the C40 to work. To test:
- Connect the Titan Two to your computer and launch Gtuner IV;
- Plug the Astro C40 at Input-A and go to Gtuner's Device monitor;
- Does the monitor shows activity when pressing buttons, moving the sticks?
Thanks.
ConsoleTuner Support Team
-
J2Kbr - General of the Army
- Posts: 20323
- Joined: Tue Mar 18, 2014 1:39 pm
Re: Titan Two Firmware 1.05-BETA (FEEDBACK NEEDED)
Yes, it work in device monitor, sticks and buttons.
-
semo - Corporal
- Posts: 5
- Joined: Sun Mar 30, 2014 11:54 pm
Re: Titan Two Firmware 1.05-BETA (FEEDBACK NEEDED)
semo wrote:Yes, it work in device monitor, sticks and buttons.
Awesome, so we are making progress with the C40.
Now, with the Titan Two connected on PS4 and the C40 at Input-A, does it work?
If not, by having first a regular PS4 controller at Input-B and (after connecting the Titan Two to PS4) plugging the C40 to Input-A, does it works?
ConsoleTuner Support Team
-
J2Kbr - General of the Army
- Posts: 20323
- Joined: Tue Mar 18, 2014 1:39 pm
Re: Titan Two Firmware 1.05-BETA (FEEDBACK NEEDED)
Now, with the Titan Two connected on PS4 and the C40 at Input-A, does it work? - No
If not, by having first a regular PS4 controller at Input-B and (after connecting the Titan Two to PS4) plugging the C40 to Input-A, does it works? Yes
If not, by having first a regular PS4 controller at Input-B and (after connecting the Titan Two to PS4) plugging the C40 to Input-A, does it works? Yes
-
semo - Corporal
- Posts: 5
- Joined: Sun Mar 30, 2014 11:54 pm
Re: Titan Two Firmware 1.05-BETA (FEEDBACK NEEDED)
semo wrote:Now, with the Titan Two connected on PS4 and the C40 at Input-A, does it work? - No If not, by having first a regular PS4 controller at Input-B and (after connecting the Titan Two to PS4) plugging the C40 to Input-A, does it works? Yes
Thank you. Your feedback confirms this update resulted on what I was expecting. Now is just figure out why the C40 is not working when in full pasthru mode.
ConsoleTuner Support Team
-
J2Kbr - General of the Army
- Posts: 20323
- Joined: Tue Mar 18, 2014 1:39 pm
Re: Titan Two Firmware 1.05-BETA (FEEDBACK NEEDED)
J2Kbr wrote:semo wrote:Now, with the Titan Two connected on PS4 and the C40 at Input-A, does it work? - No If not, by having first a regular PS4 controller at Input-B and (after connecting the Titan Two to PS4) plugging the C40 to Input-A, does it works? Yes
Thank you. Your feedback confirms this update resulted on what I was expecting. Now is just figure out why the C40 is not working when in full pasthru mode.
If you unplug the ds4 yes c40 still works but times out at 10 minutes.
-
Raptor_Titan2 - Sergeant Major
- Posts: 97
- Joined: Wed Oct 07, 2015 8:08 pm
Re: Titan Two Firmware 1.05-BETA (FEEDBACK NEEDED)
Raptor wrote:J2Kbr wrote:semo wrote:Now, with the Titan Two connected on PS4 and the C40 at Input-A, does it work? - No If not, by having first a regular PS4 controller at Input-B and (after connecting the Titan Two to PS4) plugging the C40 to Input-A, does it works? Yes
Thank you. Your feedback confirms this update resulted on what I was expecting. Now is just figure out why the C40 is not working when in full pasthru mode.
If you unplug the ds4 yes c40 still works but times out at 10 minutes.
PS4 has an authorization check every 10 minutes.
-
Buffy - Lieutenant
- Posts: 422
- Joined: Wed Jul 20, 2016 5:23 am
Re: Titan Two Firmware 1.05-BETA (FEEDBACK NEEDED)
J2Kbr wrote:semo wrote:Now, with the Titan Two connected on PS4 and the C40 at Input-A, does it work? - No If not, by having first a regular PS4 controller at Input-B and (after connecting the Titan Two to PS4) plugging the C40 to Input-A, does it works? Yes
Thank you. Your feedback confirms this update resulted on what I was expecting. Now is just figure out why the C40 is not working when in full pasthru mode.
Before you did the very first update for c40. Before you added the descriptors the c40 worked without a ds4 connected to titan 2 with no timeout. But had a few mapping irregularities. Maybe we can go back and try that out and just fix mappings.
-
Raptor_Titan2 - Sergeant Major
- Posts: 97
- Joined: Wed Oct 07, 2015 8:08 pm
Re: Titan Two Firmware 1.05-BETA (FEEDBACK NEEDED)
Raptor wrote:Before you did the very first update for c40. Before you added the descriptors the c40 worked without a ds4 connected to titan 2 with no timeout. But had a few mapping irregularities. Maybe we can go back and try that out and just fix mappings.
Before the C40 was being recognized just a regular HID controller. In your case, the reason it worked without a DS4 possible was because you have device's sd card configured with the auth file.
We are on the right track, there is a good chance to get the C40 fully working (including in full passthru mode) on the final 1.05 FW release.
ConsoleTuner Support Team
-
J2Kbr - General of the Army
- Posts: 20323
- Joined: Tue Mar 18, 2014 1:39 pm
Return to News and Announcements
Who is online
Users browsing this forum: Ice89X and 71 guests