Titan Two Firmware 1.05-BETA

Official news and announcements from the ConsoleTuner team.

Re: Titan Two Firmware 1.05-BETA (FEEDBACK NEEDED)

Postby stbobo » Fri Sep 06, 2019 4:06 pm

I am using xbox elite controller with ximapex at 500hz. which input polling rate I should set? currently I set both input and putput at 500hz. does the 500hz polling rate work for xbox elite controller? thank you
User avatar
stbobo
Corporal
Corporal
 
Posts: 4
Joined: Thu Oct 18, 2018 12:47 pm

Re: Titan Two Firmware 1.05-BETA (FEEDBACK NEEDED)

Postby J2Kbr » Fri Sep 06, 2019 8:44 pm

Thank you Scachi for your feedback.
Scachi wrote:Does the Input Polling Rate settings apply (and has an effect) to all types of connections (usb/bluetooth/Input-A,Input-B, OTG) or only for specific ones ?

The input polling rate is applied to all USB inputs, including to the PROG and OUTPUT ports with OTG adapter. The Bluetooth inputs are not affect by this setting. The Bluetooth architecture is different from USB, it does not requires the host to poll the device, is the device that determines how often a data packet is send.
ConsoleTuner Support Team
User avatar
J2Kbr
General of the Army
General of the Army
 
Posts: 18796
Joined: Tue Mar 18, 2014 1:39 pm

Re: Titan Two Firmware 1.05-BETA (FEEDBACK NEEDED)

Postby J2Kbr » Fri Sep 06, 2019 8:52 pm

stbobo wrote:I am using xbox elite controller with ximapex at 500hz. which input polling rate I should set? currently I set both input and putput at 500hz. does the 500hz polling rate work for xbox elite controller? thank you

The Xbox One controller responds only at 250 Hz, not mattering how fast it is polled. You can, however, have the Titan Two configured to poll at 1000Hz without any detrimental effect.
ConsoleTuner Support Team
User avatar
J2Kbr
General of the Army
General of the Army
 
Posts: 18796
Joined: Tue Mar 18, 2014 1:39 pm

Re: Titan Two Firmware 1.05-BETA (FEEDBACK NEEDED)

Postby Scachi » Sat Sep 07, 2019 5:46 pm

Did anyone of you downgrade to stable again successfully ?
I changed the gtuner.cfg entry to beta_tester=false , restarted gtuner, put my T2 into P mode and it said it is installing the stable version 1.4.3.1. It finishes fine. When the T2 connects again GTuner is still saying FW 1.5.1.2
Restarting gtuner or the T2 doesn't change it. It is still reporting the beta FW.
I tried with both of my T2 but can't downgrade one.
User avatar
Scachi
Brigadier General
Brigadier General
 
Posts: 2337
Joined: Wed May 11, 2016 6:25 am
Location: Germany

Re: Titan Two Firmware 1.05-BETA (FEEDBACK NEEDED)

Postby prototype » Sat Sep 07, 2019 7:05 pm

It worked for me by forcing P mode to update :wink:
Console tuner since my 1st controller.
Believe or dare, It's Titanic! :smile0517:
User avatar
prototype
Brigadier General
Brigadier General
 
Posts: 3042
Joined: Sun Dec 16, 2012 1:43 pm

Re: Titan Two Firmware 1.05-BETA (FEEDBACK NEEDED)

Postby Scachi » Sat Sep 07, 2019 7:21 pm

prototype wrote:It worked for me by forcing P mode to update :wink:

Thank you for the reply :smile0517:
I'll try again tomorrow and from another computer.

Do you know if you did update the upated beta FW 1.5.1.2 ? viewtopic.php?f=2&t=13510&start=30#p89297
Or were you still running the FW from the initial post 1.5.1.0 ?

Just to rule out that my issue happens only when downgrade from the 1.5.1.2 :wink:
User avatar
Scachi
Brigadier General
Brigadier General
 
Posts: 2337
Joined: Wed May 11, 2016 6:25 am
Location: Germany

Re: Titan Two Firmware 1.05-BETA (FEEDBACK NEEDED)

Postby prototype » Sat Sep 07, 2019 7:34 pm

Yes i did the update 1.5.1.2 before the rollback but not with my second device which is still in 1.4.3.0.
Console tuner since my 1st controller.
Believe or dare, It's Titanic! :smile0517:
User avatar
prototype
Brigadier General
Brigadier General
 
Posts: 3042
Joined: Sun Dec 16, 2012 1:43 pm

Re: Titan Two Firmware 1.05-BETA (FEEDBACK NEEDED)

Postby GettenOld » Sat Sep 07, 2019 9:00 pm

Has anyone had success getting the C40 to work with the T2 on the beta firmware?
User avatar
GettenOld
Sergeant
Sergeant
 
Posts: 9
Joined: Fri Nov 09, 2018 9:33 pm

Re: Titan Two Firmware 1.05-BETA (FEEDBACK NEEDED)

Postby kryptik66 » Sun Sep 08, 2019 11:20 am

When beta_tester=true will Gtuner still update to future stable releases or will it only update to Beta versions? just wondering if I can leave the value as true if I like the results of this beta.
User avatar
kryptik66
Master Sergeant
Master Sergeant
 
Posts: 26
Joined: Fri Feb 10, 2017 9:29 pm

Re: Titan Two Firmware 1.05-BETA (FEEDBACK NEEDED)

Postby jelly44 » Sun Sep 08, 2019 1:48 pm

kryptik66 wrote:When beta_tester=true will Gtuner still update to future stable releases or will it only update to Beta versions? just wondering if I can leave the value as true if I like the results of this beta.


Same here ... wondering the same.
- My recommendation for learning C programming: 'C Programming Absolute Beginner's Guide'
- Create your own scripts with GPC2 Scripting
User avatar
jelly44
Command Sergeant Major
Command Sergeant Major
 
Posts: 165
Joined: Tue Feb 05, 2019 3:49 pm

PreviousNext

Return to News and Announcements

Who is online

Users browsing this forum: teddycarlin and 5 guests