Page 1 of 7

Titan Two Firmware 1.06-BETA (iOS 13 and Elite V2)

PostPosted: Wed Nov 13, 2019 7:55 am
by J2Kbr
Titan Two firmware 1.06 is available for beta testing.

FW 1.06 adds support for Bluetooth connection to Apple devices with iOS13, emulating DualShock 4 controller. Instructions of how to pair and connect the Titan Two with iPhones and/or iPads can be found here:

https://www.consoletuner.com/wiki/index ... iosdevices

FW 1.06B changelog:
* Bluetooth Module: Optimizations and improvements of device pairing procedures (dev type detection)
* PS4 Emulator: Added support for iOS 13 over Bluetooth, emulating a DualShock 4 controller
* XB1 Driver: Included ID 045E:0B00 to be recognized as XB1 Elite S2 controller (paddles support)
* XB1 Driver: Added detection of the Xbox Elite S2 controller for Bluetooth pairing (ID 045E:0B05)
* XB1 Driver: Fixed button mapping in Bluetooth connection for controllers with ID 045E:02FD
* XB1WRC Driver: Added support for XB1 controllers updated with the latest firmware {GitHub#241}
* XB1WRC Driver: Included ID 045E:0B00 to be recognized as XB1 Elite S2 controller (paddles support)
* XB1WRC Driver: Added support for console authentication using Elite S2 and updated S controllers

To update your device with the beta firmware, proceed as the following:

1. Update Gtuner IV to 1.05
2. Go to the folder where Gtuner.exe is located
3. Find the file named “Gtuner.cfg” and open it on notepad or similar text editor
4. At the very end of the file, add the following
Code: Select all
[Advanced]
beta_tester=true
5. Run Gtuner IV and update the device.

To rollback to the stable firmware:

1. set beta_tester= to false
2. put the Titan Two in programming mode and update as normal

--

Any feedback on beta release will be very appreciated.

Thank you.

Re: Titan Two Firmware 1.06-BETA (iOS 13 and Elite V2)

PostPosted: Wed Nov 13, 2019 9:48 am
by Buffy
After installing the beta FW and re-configuring my SD;

Wired:
XB1_P1-P4 still do not show up

Wireless XB1 Adapter:
It's like the controller can sync to the adapter, but inputs are not read from the controller.

Re: Titan Two Firmware 1.06-BETA (iOS 13 and Elite V2)

PostPosted: Wed Nov 13, 2019 1:59 pm
by J2Kbr
Buffy wrote:After installing the beta FW and re-configuring my SD;
Wired: XB1_P1-P4 still do not show up
Wireless XB1 Adapter: It's like the controller can sync to the adapter, but inputs are not read from the controller.

Shadow wrote:After installing the beta FW and re-configuring my SD; Bluetooth connection is established and buttons register except for Home and Menu. P1-P4 don´t register when on default controller profile.

Thank you for the feedback. I still don't have the Elite V2 in hands (will soon).

It would be very helpful if one could capture the data packets of V2 wired (not just the descriptors), as the following:

1) Unplug all controllers from the Titan Two;
2) Connect the output to the XB1 console;
3) Connect the Prog port to your computer;
4) Open Gtuner IV and go to top menu Tools -> "Fetch Descriptors ...";
5) Plug the Elite V2 port at the front of the Titan Two, and ...
6) !IMPORTANT! Quickly press the back paddles button several times (must be in the first 2.5 secs the controller is plugged);
7) After couple seconds the fetch window will be updated with the captured data;
8) Click on the button "Copy Descriptors" and send to me.

Thank you.

Re: Titan Two Firmware 1.06-BETA (iOS 13 and Elite V2)

PostPosted: Wed Nov 13, 2019 3:00 pm
by J2Kbr
thank you very much, this will work. Will be taking a look shortly.

Re: Titan Two Firmware 1.06-BETA (iOS 13 and Elite V2)

PostPosted: Wed Nov 13, 2019 7:29 pm
by Allblksniper
Quick question. I haven’t bought a remote to play on IOS yet. Is it better to buy PS4 remote or an xbone remote? Thanks

Re: Titan Two Firmware 1.06-BETA (iOS 13 and Elite V2)

PostPosted: Wed Nov 13, 2019 8:35 pm
by J2Kbr
Allblksniper wrote:Quick question. I haven’t bought a remote to play on IOS yet. Is it better to buy PS4 remote or an xbone remote? Thanks

With the Titan Two you can be using on iOS13 any controller of your preference, even keyboard/mouse. :smile0517:

Re: Titan Two Firmware 1.06-BETA (iOS 13 and Elite V2)

PostPosted: Wed Nov 13, 2019 11:10 pm
by Allblksniper
Thank you.

Re: Titan Two Firmware 1.06-BETA (iOS 13 and Elite V2)

PostPosted: Thu Nov 14, 2019 9:59 am
by J2Kbr
Thank you again Shadow for the captured data. Indeed the data packet of V2 is different from the first Elite version. The revision 1 of 1.06 beta firmware was just made available. The paddles should be working now on wired connection (please check if the mapping, P1, P2, etc are correct).

Buffy wrote:It's like the controller can sync to the adapter, but inputs are not read from the controller.

Does the Xbox button lights up?

I will need the Elite V2 in hands in order to fix the wrong buttons mappings on Bluetooth connection and inputs not being registered with the Wireless Adapter. There is one already on its ways to me, once delivered these corrections should be out in 1 or 2 days. :smile0517:

Re: Titan Two Firmware 1.06-BETA (iOS 13 and Elite V2)

PostPosted: Thu Nov 14, 2019 2:41 pm
by J2Kbr
Shadow wrote:You are very welcome. Paddles register on wired connection on the default profile too but the mapping is swapped as following.
P1 > P3
P2 > P1
P3 > P4
P4 > P2

Thank you for checking the paddles mapping.
Fixed on revision 2 of 1.06 beta firmware, already available. :smile0517:

Re: Titan Two Firmware 1.06-BETA (iOS 13 and Elite V2)

PostPosted: Thu Nov 14, 2019 2:57 pm
by J2Kbr
Please check again with the FW 1.6.1.3 - Thank you.