Titan Two Firmware 1.06-BETA (iOS 13 and Elite V2)
Posted: Wed Nov 13, 2019 7:55 am
Titan Two firmware 1.06 is available for beta testing.
FW 1.06 adds support for Bluetooth connection to Apple devices with iOS13, emulating DualShock 4 controller. Instructions of how to pair and connect the Titan Two with iPhones and/or iPads can be found here:
https://www.consoletuner.com/wiki/index ... iosdevices
FW 1.06B changelog:
* Bluetooth Module: Optimizations and improvements of device pairing procedures (dev type detection)
* PS4 Emulator: Added support for iOS 13 over Bluetooth, emulating a DualShock 4 controller
* XB1 Driver: Included ID 045E:0B00 to be recognized as XB1 Elite S2 controller (paddles support)
* XB1 Driver: Added detection of the Xbox Elite S2 controller for Bluetooth pairing (ID 045E:0B05)
* XB1 Driver: Fixed button mapping in Bluetooth connection for controllers with ID 045E:02FD
* XB1WRC Driver: Added support for XB1 controllers updated with the latest firmware {GitHub#241}
* XB1WRC Driver: Included ID 045E:0B00 to be recognized as XB1 Elite S2 controller (paddles support)
* XB1WRC Driver: Added support for console authentication using Elite S2 and updated S controllers
To update your device with the beta firmware, proceed as the following:
1. Update Gtuner IV to 1.05
2. Go to the folder where Gtuner.exe is located
3. Find the file named “Gtuner.cfg” and open it on notepad or similar text editor
4. At the very end of the file, add the following
To rollback to the stable firmware:
1. set beta_tester= to false
2. put the Titan Two in programming mode and update as normal
--
Any feedback on beta release will be very appreciated.
Thank you.
FW 1.06 adds support for Bluetooth connection to Apple devices with iOS13, emulating DualShock 4 controller. Instructions of how to pair and connect the Titan Two with iPhones and/or iPads can be found here:
https://www.consoletuner.com/wiki/index ... iosdevices
FW 1.06B changelog:
* Bluetooth Module: Optimizations and improvements of device pairing procedures (dev type detection)
* PS4 Emulator: Added support for iOS 13 over Bluetooth, emulating a DualShock 4 controller
* XB1 Driver: Included ID 045E:0B00 to be recognized as XB1 Elite S2 controller (paddles support)
* XB1 Driver: Added detection of the Xbox Elite S2 controller for Bluetooth pairing (ID 045E:0B05)
* XB1 Driver: Fixed button mapping in Bluetooth connection for controllers with ID 045E:02FD
* XB1WRC Driver: Added support for XB1 controllers updated with the latest firmware {GitHub#241}
* XB1WRC Driver: Included ID 045E:0B00 to be recognized as XB1 Elite S2 controller (paddles support)
* XB1WRC Driver: Added support for console authentication using Elite S2 and updated S controllers
To update your device with the beta firmware, proceed as the following:
1. Update Gtuner IV to 1.05
2. Go to the folder where Gtuner.exe is located
3. Find the file named “Gtuner.cfg” and open it on notepad or similar text editor
4. At the very end of the file, add the following
- Code: Select all
[Advanced]
beta_tester=true
To rollback to the stable firmware:
1. set beta_tester= to false
2. put the Titan Two in programming mode and update as normal
--
Any feedback on beta release will be very appreciated.
Thank you.