Page 22 of 30

Re: Gtuner IV 1.07 PUBLIC RELEASE: Computer Vision

PostPosted: Thu Mar 19, 2020 1:09 am
by laloalmada
J2Kbr wrote:
laloalmada wrote:The file path and filename are: C:/Users/Lalo/Desktop/GtunerIV and legends.py Thank you!

Looks good, should work like that.

If you don't try run a GCV script (.py), by selecting the "Video Input Check" in the combobox, does it work? can you see the video input? Thank you.


No bro, the video is not seen. I already tried as you told me. I have an Avermedia Portable 2 Puls is the Gc513 and the program to run it is RECentral 4. That capture works? =/

Thank you!

Re: Gtuner IV 1.07 PUBLIC RELEASE: Computer Vision

PostPosted: Thu Mar 19, 2020 7:16 pm
by J2Kbr
According the AverMedia website the GC513 is UVC compliant, therefore should work with Gtuner IV.

In the Video input configurations, is your video card detected?
detected.png
detected.png (23.77 KiB) Viewed 3904 times

If yes, the backend selected by default is "MS Media Foundation", please try change to "MS DirectShow".
backend.png
backend.png (15.25 KiB) Viewed 3904 times

Re: Gtuner IV 1.07 PUBLIC RELEASE: Computer Vision

PostPosted: Thu Mar 19, 2020 7:17 pm
by J2Kbr
Also: be sure to select resolution: 1920 x 1080

Re: Gtuner IV 1.07 PUBLIC RELEASE: Computer Vision

PostPosted: Fri Mar 20, 2020 1:26 am
by laloalmada
Here are some images

Re: Gtuner IV 1.07 PUBLIC RELEASE: Computer Vision

PostPosted: Fri Mar 20, 2020 1:33 am
by laloalmada
J2Kbr wrote:Also: be sure to select resolution: 1920 x 1080

I did it and I also put some images above.

Thank you!

Re: Gtuner IV 1.07 PUBLIC RELEASE: Computer Vision

PostPosted: Fri Mar 20, 2020 6:06 am
by J2Kbr
Thank you for posting the screenshots. I noticed you are using Python 3.7 which makes me wonder if this is the cause of the issue. So far I tested only with the latest Python release (3.8), so there is a chance of older versions not be compatible. If possible for you, please try with Python 3.8 as described here: viewtopic.php?p=96497&f=2#p96497

Re: Gtuner IV 1.07 PUBLIC RELEASE: Computer Vision

PostPosted: Fri Mar 20, 2020 9:34 pm
by laloalmada
J2Kbr wrote:Thank you for posting the screenshots. I noticed you are using Python 3.7 which makes me wonder if this is the cause of the issue. So far I tested only with the latest Python release (3.8), so there is a chance of older versions not be compatible. If possible for you, please try with Python 3.8 as described here: viewtopic.php?p=96497&f=2#p96497


Thanks a lot! I finally got Computer Vision to work! The problem was the Python version. Version 3.7 does not work with Compurer Vision.

Re: Gtuner IV 1.07 PUBLIC RELEASE: Computer Vision

PostPosted: Fri Mar 20, 2020 11:11 pm
by Mad
laloalmada wrote:Thanks a lot! I finally got Computer Vision to work! The problem was the Python version. Version 3.7 does not work with Compurer Vision.

Great, thanks for the update. :joia:

Re: Gtuner IV 1.07 PUBLIC RELEASE: Computer Vision

PostPosted: Sat Mar 21, 2020 12:06 pm
by J2Kbr
Mad wrote:
laloalmada wrote:Thanks a lot! I finally got Computer Vision to work! The problem was the Python version. Version 3.7 does not work with Compurer Vision.

Great, thanks for the update. :joia:

+1 :smile0202:

Re: Gtuner IV 1.07 PUBLIC RELEASE: Computer Vision

PostPosted: Wed Mar 25, 2020 12:39 am
by BlueWonder
Hey, I can't seem to download the GtunerIVBeta.zip. Something wrong with the link itself, maybe? Probably just me.