Titan Two Firmware 1.07 PUBLIC RELEASE
Posted: Wed Feb 26, 2020 2:39 pm
-- UPDATE (March 14th, 2020) --
Titan Two Firmware 1.07 Public Release
-- UPDATE (March 6th, 2020) --
Along Gtuner IV 1.07-RC the Titan Two final testing firmware release is also available for update. Please check below the new features, improvements and changes made.
Titan Two FW 1.07RC Changelog:
* GPC VM: Added MOUSE_DPI identifier to retrieve the user's configured mouse dpi using mouse_status()
* GPC VM: Added support for Gtuner's Computer Vision interface feedback: gcv_ready() and gcv_read()
* Changed all preprocessor macros related to configure the port status flags to standard functions
* Fixed bug causing delay with mxyconverter_*offset(0) when no controller is present {GitHub#259}
* HID Driver: Improvements on mouse raw data acquisition in order to mitigate "noise" (1000Hz)
* Mouse XY Translation: Several optimizations on the conversion algorithm (less CPU demanding)
* Bluetooth Module: Catch and report to Gtuner IV connection errors, including event identification
* Bluetooth Module: Halt data transmission to Bluetooth module if CTS signal is asserted {GitHub#258}
* Bluetooth Module: Dynamic alloc memory for services when needed, instead of static allocation
* Switch Emu: Wait Nintendo Switch commit the pairing results before close USB connection {GitHub#260}
* HID Driver: Increased maximum HID usage items from 20 to 32 (required by Air Mouse) {GitHub#257}
* Multi HID Emu: Added MOUSE_ACPAN to programmatically perform horizontal scroll {GitHub#243}
-- ORIGINAL POST --
Titan Two firmware 1.07 is available for beta testing.
To update your device with the beta firmware, proceed as the following:
1. Update Gtuner IV to 1.07-BETA
2. Go to the folder where Gtuner.exe is located
3. Find the file named “Gtuner.cfg” and open it on notepad or similar text editor
4. At the very end of the file, add the following
To rollback to the stable firmware:
1. set beta_tester= to false
2. put the Titan Two in programming mode and update as normal
--
Any feedback on beta release is appreciated.
Thank you.
Titan Two Firmware 1.07 Public Release
-- UPDATE (March 6th, 2020) --
Along Gtuner IV 1.07-RC the Titan Two final testing firmware release is also available for update. Please check below the new features, improvements and changes made.
Titan Two FW 1.07RC Changelog:
* GPC VM: Added MOUSE_DPI identifier to retrieve the user's configured mouse dpi using mouse_status()
* GPC VM: Added support for Gtuner's Computer Vision interface feedback: gcv_ready() and gcv_read()
* Changed all preprocessor macros related to configure the port status flags to standard functions
* Fixed bug causing delay with mxyconverter_*offset(0) when no controller is present {GitHub#259}
* HID Driver: Improvements on mouse raw data acquisition in order to mitigate "noise" (1000Hz)
* Mouse XY Translation: Several optimizations on the conversion algorithm (less CPU demanding)
* Bluetooth Module: Catch and report to Gtuner IV connection errors, including event identification
* Bluetooth Module: Halt data transmission to Bluetooth module if CTS signal is asserted {GitHub#258}
* Bluetooth Module: Dynamic alloc memory for services when needed, instead of static allocation
* Switch Emu: Wait Nintendo Switch commit the pairing results before close USB connection {GitHub#260}
* HID Driver: Increased maximum HID usage items from 20 to 32 (required by Air Mouse) {GitHub#257}
* Multi HID Emu: Added MOUSE_ACPAN to programmatically perform horizontal scroll {GitHub#243}
-- ORIGINAL POST --
Titan Two firmware 1.07 is available for beta testing.
To update your device with the beta firmware, proceed as the following:
1. Update Gtuner IV to 1.07-BETA
2. Go to the folder where Gtuner.exe is located
3. Find the file named “Gtuner.cfg” and open it on notepad or similar text editor
4. At the very end of the file, add the following
- Code: Select all
[Advanced]
beta_tester=true
To rollback to the stable firmware:
1. set beta_tester= to false
2. put the Titan Two in programming mode and update as normal
--
Any feedback on beta release is appreciated.
Thank you.