Which device to get? HELP MAKE MY MIND UP PLEASE
21 posts
• Page 2 of 3 • 1, 2, 3
Re: Which device to get? HELP MAKE MY MIND UP PLEASE
rc419 wrote:XB1
XB1 controller, maybe M&K if I get froggy.
I'm torn between the Apex and the T2. I've been watching a lot of T2 and it was the first one I read up on, but now everyone is spitting Apex fuel... I'm looking for auto breath hold on ADS, maybe recoil management for the controller. I might venture into the M&K realm if I can force myself to play FPS with an M&K(always felt weird). PUBG felt real weird until I switched to Type B(COD gamer). PUBG, Fortnite and the new BO4 will be my games of choice going forward.
Thoughts? I'm ready to pull the trigger on a device.
Thanks guys
hello
i have the t2 and xim apex
with xim apex you have to wait til the develaper made a profil for the game you can use headset and mouse movment can be
set to the game fps 60.30.
on titan 2 you can make your owen profil for games but you need a pc and if you use headset you have to plug keybaord on
otg port Which has low priority and is required for pc to make the profil
-
teddy18 - Lieutenant
- Posts: 346
- Joined: Sun Jul 19, 2015 4:18 pm
Re: Which device to get? HELP MAKE MY MIND UP PLEASE
bonefisher wrote:rc419 wrote:J2Kbr wrote:With a regular controllers use the anti-recoil available in the Gamepacks or Scripts, the mxyconverter_voffset() works only for mouse.
Ok, thanks for the continued replies.
- Code: Select all
#pragma METAINFO("AntiRecoil for Mouse", 1, 0, "bonefisher")
#include <mouse.gph>
#include <keyboard.gph>
#define vertical_compensation 24 //pull force
init {
const uint8 mmap[] = {
MOUSE_X, STICK_1_X,
MOUSE_Y, STICK_1_Y,
MWHEEL_FORWARD, BUTTON_17,
MWHEEL_BACKWARD, BUTTON_6,
MBUTTON_1, BUTTON_5,
MBUTTON_2, BUTTON_8,
MBUTTON_3, BUTTON_14,
MBUTTON_4, BUTTON_15,
MBUTTON_5, BUTTON_16,
}; mousemapping(mmap);
const uint8 map[] = {
KEY_W, STICK_2_Y | KEYMAP_NEGATIVE,
KEY_A, STICK_2_X | KEYMAP_NEGATIVE,
KEY_S, STICK_2_Y,
KEY_D, STICK_2_X,
KEY_V, BUTTON_1, // PS4_PS
KEY_C, BUTTON_2, // PS4_TOUCH
KEY_X, BUTTON_3, // PS4_OPTIONS
KEY_E, BUTTON_4, // PS4_R1
KEY_F, BUTTON_6, // PS4_R3
KEY_Q, BUTTON_7, // PS4_L1
KEY_LEFTSHIFT, BUTTON_9, // PS4_L3
KEY_UPARROW, BUTTON_10,// UP
KEY_DOWNARROW, BUTTON_11,// DOWN
KEY_LEFTARROW, BUTTON_12,// LEFT
KEY_RIGHTARROW, BUTTON_13,// RIGHT
KEY_LEFTALT, BUTTON_15,//
KEY_SPACEBAR, BUTTON_16,// CROSS
KEY_R, BUTTON_17,// SQUARE
KEY_TAB, BUTTON_18,// SHARE
KEY_CAPSLOCK, BUTTON_19,// LTOUCH
}; keymapping(map);
}
main {
if(event_active(BUTTON_5)) {
mxyconverter_voffset(vertical_compensation);
} else if(event_release(BUTTON_5)) {
mxyconverter_voffset(0);
}
if(is_active(STICK_1_Y)){mxyconverter_voffset(0);
}else if(is_release(STICK_1_Y) && is_active(BUTTON_5)){
mxyconverter_voffset(vertical_compensation);
}
if(is_active(STICK_1_X)){mxyconverter_voffset(0);
}else if(is_release(STICK_1_X) && is_active(BUTTON_5)){
mxyconverter_voffset(vertical_compensation);
}
}
Here is code for that and have one that works just like this for all around controllers, KB&M and XIM.
So the above code works for XBO wireless controller or wired?
Thanks teddy
-
rc419 - Sergeant Major
- Posts: 95
- Joined: Thu Jun 28, 2018 6:04 pm
Re: Which device to get? HELP MAKE MY MIND UP PLEASE
This is the one to use the one above is for mouse!
- Code: Select all
#pragma METAINFO("AR with rapid fire", 1, 0, "bonefisher")
#define vertical 18.00 //adjust anti-recoil: add if gun is rising and subtract if dropping.
#define horizontal 0.00 //adjust anti-recoil right and left: add positive number if going left
//and add a - in front of number if going right.
bool rapid_fire_toggle;
bool anti_recoil_toggle;
fix32 noise;
init{noise = 7.0;}
main {
//-------------------------Remove stick noise---------------------------------//
if(abs(get_actual(STICK_1_X)) < noise) set_val(STICK_1_X, 0.0);
if(abs(get_actual(STICK_1_Y)) < noise) set_val(STICK_1_Y, 0.0);
if(abs(get_actual(STICK_2_X)) < noise) set_val(STICK_2_X, 0.0);
if(abs(get_actual(STICK_2_Y)) < noise) set_val(STICK_2_Y, 0.0);
//-------------------------Anti-recoil toggle---------------------------------//
/* To turn anti-recoil on/off hold ADS trigger and click d-pad down */
if(get_actual(BUTTON_8)){
set_val(BUTTON_11, 0.0);
if(event_active(BUTTON_11)) {
anti_recoil_toggle = (anti_recoil_toggle == 0?1:0);}}
//----------------------------------------------------------------------------//
if(anti_recoil_toggle){
if(get_actual(BUTTON_5))combo_run(anti_recoil);
if(is_active(STICK_1_Y))combo_stop(anti_recoil);
if(is_active(STICK_1_X))combo_stop(anti_recoil);}
//-------------------------Rapid fire toggle----------------------------------//
/* To turn rapid fire on/off hold ADS trigger and click d-pad up */
if(get_actual(BUTTON_8)){
set_val(BUTTON_10, 0.0);
if(event_active(BUTTON_10)) {
rapid_fire_toggle = (rapid_fire_toggle == 0?1:0);}}
//----------------------------------------------------------------------------//
if(rapid_fire_toggle && get_actual(BUTTON_5))combo_run(rapid_fire);
}
combo rapid_fire
{
set_val(BUTTON_5, 100.0);
wait(60);
set_val(BUTTON_5, 0.0);
wait(60);
set_val(BUTTON_5, 0.0);
}
combo anti_recoil
{
set_val(STICK_1_Y, vertical);
set_val(STICK_1_X, horizontal);
}
- bonefisher
- Lieutenant General
- Posts: 5413
- Joined: Thu Jan 29, 2015 10:49 am
Re: Which device to get? HELP MAKE MY MIND UP PLEASE
T2 ordered, it'll be here Wednesday. Woot Woot
-
rc419 - Sergeant Major
- Posts: 95
- Joined: Thu Jun 28, 2018 6:04 pm
Re: Which device to get? HELP MAKE MY MIND UP PLEASE
bonefisher wrote:This is the one to use the one above is for mouse!
- Code: Select all
#pragma METAINFO("AR with rapid fire", 1, 0, "bonefisher")
#define vertical 18.00 //adjust anti-recoil: add if gun is rising and subtract if dropping.
#define horizontal 0.00 //adjust anti-recoil right and left: add positive number if going left
//and add a - in front of number if going right.
bool rapid_fire_toggle;
bool anti_recoil_toggle;
fix32 noise;
init{noise = 7.0;}
main {
//-------------------------Remove stick noise---------------------------------//
if(abs(get_actual(STICK_1_X)) < noise) set_val(STICK_1_X, 0.0);
if(abs(get_actual(STICK_1_Y)) < noise) set_val(STICK_1_Y, 0.0);
if(abs(get_actual(STICK_2_X)) < noise) set_val(STICK_2_X, 0.0);
if(abs(get_actual(STICK_2_Y)) < noise) set_val(STICK_2_Y, 0.0);
//-------------------------Anti-recoil toggle---------------------------------//
/* To turn anti-recoil on/off hold ADS trigger and click d-pad down */
if(get_actual(BUTTON_8)){
set_val(BUTTON_11, 0.0);
if(event_active(BUTTON_11)) {
anti_recoil_toggle = (anti_recoil_toggle == 0?1:0);}}
//----------------------------------------------------------------------------//
if(anti_recoil_toggle){
if(get_actual(BUTTON_5))combo_run(anti_recoil);
if(is_active(STICK_1_Y))combo_stop(anti_recoil);
if(is_active(STICK_1_X))combo_stop(anti_recoil);}
//-------------------------Rapid fire toggle----------------------------------//
/* To turn rapid fire on/off hold ADS trigger and click d-pad up */
if(get_actual(BUTTON_8)){
set_val(BUTTON_10, 0.0);
if(event_active(BUTTON_10)) {
rapid_fire_toggle = (rapid_fire_toggle == 0?1:0);}}
//----------------------------------------------------------------------------//
if(rapid_fire_toggle && get_actual(BUTTON_5))combo_run(rapid_fire);
}
combo rapid_fire
{
set_val(BUTTON_5, 100.0);
wait(60);
set_val(BUTTON_5, 0.0);
wait(60);
set_val(BUTTON_5, 0.0);
}
combo anti_recoil
{
set_val(STICK_1_Y, vertical);
set_val(STICK_1_X, horizontal);
}
Hey bonefisher,
I added your script to a new file and saved it to memory slot 1. The T2 was on and everything, but no change in performance or action of the character. I unplugged it and was going to add the public PUBG file to slot 2 and test it out, but now my PC won't recognize the T2 and there are no LED's lighting up. The PROG light flickers red, but won't come back on. I'm not sure what is going on. Did my T2 puke out 2 minutes out of the box? I also attempted to press and hold both buttons with no change as well as restarted my PC and used multiple different ports :(
-
rc419 - Sergeant Major
- Posts: 95
- Joined: Thu Jun 28, 2018 6:04 pm
Re: Which device to get? HELP MAKE MY MIND UP PLEASE
Have you tried a different cable ?
-
Scachi - Brigadier General
- Posts: 3044
- Joined: Wed May 11, 2016 6:25 am
- Location: Germany
Re: Which device to get? HELP MAKE MY MIND UP PLEASE
Scachi wrote:Have you tried a different cable ?
Yes. 3 cables, T2 supplied cable, different USB ports(3.0 and 2.0). no change :(. I'm sad right now.
-
rc419 - Sergeant Major
- Posts: 95
- Joined: Thu Jun 28, 2018 6:04 pm
Re: Which device to get? HELP MAKE MY MIND UP PLEASE
rc419 wrote:Yes. 3 cables, T2 supplied cable, different USB ports(3.0 and 2.0). no change :(. I'm sad right now.
Please try reflash the device’s firmware: before connect the Titan Two to the computer via the PROG port, press and hold both buttons and only then connect it to you computer. The device should enter in programming mode, showing P on the display, allowing redo the firmware update using Gtuner IV.
ConsoleTuner Support Team
-
J2Kbr - General of the Army
- Posts: 20323
- Joined: Tue Mar 18, 2014 1:39 pm
Re: Which device to get? HELP MAKE MY MIND UP PLEASE
J2Kbr wrote:rc419 wrote:Yes. 3 cables, T2 supplied cable, different USB ports(3.0 and 2.0). no change :(. I'm sad right now.
Please try reflash the device’s firmware: before connect the Titan Two to the computer via the PROG port, press and hold both buttons and only then connect it to you computer. The device should enter in programming mode, showing P on the display, allowing redo the firmware update using Gtuner IV.
J2Kbr,
Ill try this before I had to work in a few minutes and report back. You re saying to press and hold both buttons and plug the cable inro the prof port while atill holding the buttons?
Stand by.
-
rc419 - Sergeant Major
- Posts: 95
- Joined: Thu Jun 28, 2018 6:04 pm
Re: Which device to get? HELP MAKE MY MIND UP PLEASE
J2Kbr wrote:rc419 wrote:Yes. 3 cables, T2 supplied cable, different USB ports(3.0 and 2.0). no change :(. I'm sad right now.
Please try reflash the device’s firmware: before connect the Titan Two to the computer via the PROG port, press and hold both buttons and only then connect it to you computer. The device should enter in programming mode, showing P on the display, allowing redo the firmware update using Gtuner IV.
Thanks!
- Attachments
-
- 2018-12-13_6-55-22.jpg (94.77 KiB) Viewed 1073 times
-
rc419 - Sergeant Major
- Posts: 95
- Joined: Thu Jun 28, 2018 6:04 pm
21 posts
• Page 2 of 3 • 1, 2, 3
Who is online
Users browsing this forum: No registered users and 47 guests