titan two k&m question

[randomidiot]

hello,

before i buy i want to know if its possible to use keyboard & mouse on the titan two without unplugging them from the pc.

i dont really want to plug and unplug the k&m from the PC every time i wanna play on the console.

it is possible?

[J2Kbr]

Thank you for your interest on the Titan Two.

before i buy i want to know if its possible to use keyboard & mouse on the titan two without unplugging them from the pc.

Yes, the K&M connected in your PC can be used to play on consoles (via Gtuner IV -> KMG Capture), as well as directly plugged into the Titan Two device, with no PC connection.

[randomidiot]

hello again, @j2kbr

my titan two just arrived and i have some questions. i looked for info about K&M using KMG Capture but i couldnt find much.

i already have my input translator file ready, and i know i have to turn on KMG Capture to use the K&M without having to unplug the K&M from my PC.

the thing i dont know is how to plug the titan two to the ps4 and PC at the same time...
my guess is:
- set ps4 to usb cable mode.
- titan two output usb cable to ps4
- ps4 controller to titan two input-b

but how i plug the titan two to the PC so i can use K&M? via the PROG input? or i need a cable from input-a to my PC?

[Scachi]

Prog port is correct.

output_port->ps4 (protocol automatic or ps4, both should work fine with the ps4)

ds4-controller->input-b
pc->prog port

Also don't forget the first time configuration:
First-time Configuration

On PlayStation 4, enable wired communication:
Settings → Devices → Controllers → Communication Method: Use USB Cable.
Configure the Output Protocol of the Titan Two to USB Automatic or USB PlayStation 4.

Ah, sorry. You have done that first time configuration step already

[randomidiot]

prog port was the final step.
everything its working now, thanks!