Adding FootPedals (antithesis)

[Maxxgold]

Hey antithesis,

I believe I’ve seen a few posts where you mention you have added in some foot pedals to your setup. I have a set lying around, and would love to add them in to my setup. Can you set me on the path to configuring my setup? I use the XIM Connected to the Titan Two, with a Sony Navigation controller and a Logitech 502 mouse. The foot pedal has two pedals.

https://www.amazon.com/gp/product/B0755 ... UTF8&psc=1


Thank you!

[J2Kbr]

All you need to do is connect the foot-pedal to the Titan Two and configure an Input Translator (GIT file) to map the 2 keys to the controller buttons.

[Maxxgold]

All you need to do is connect the foot-pedal to the Titan Two and configure an Input Translator (GIT file) to map the 2 keys to the controller buttons.

I’m currently playing on my PS5, and with the 3rd party controller taking the Input B port, and my XIM taking the Inout A port, is there a way to add in the footpedal?

[SirBrass]

All you need to do is connect the foot-pedal to the Titan Two and configure an Input Translator (GIT file) to map the 2 keys to the controller buttons.

I’m currently playing on my PS5, and with the 3rd party controller taking the Input B port, and my XIM taking the Inout A port, is there a way to add in the footpedal?

Is your DS4 or Dual Sense taking up the 3rd input port? If not, and you aren't having auth issues, you use a micro USB OTG cable to connect the pedals to the Program (Input C) port. The T2 recognizes when there's a controller attached there vs being plugged into the PC.

[Maxxgold]

All you need to do is connect the foot-pedal to the Titan Two and configure an Input Translator (GIT file) to map the 2 keys to the controller buttons.

I’m currently playing on my PS5, and with the 3rd party controller taking the Input B port, and my XIM taking the Inout A port, is there a way to add in the footpedal?

Is your DS4 or Dual Sense taking up the 3rd input port? If not, and you aren't having auth issues, you use a micro USB OTG cable to connect the pedals to the Program (Input C) port. The T2 recognizes when there's a controller attached there vs being plugged into the PC.

Thank you!

That port is open. I just wasn’t sure if that was possible. Now, I just have to see if I have that cable lying around. If not, I’ll order one.

[Maxxgold]

All you need to do is connect the foot-pedal to the Titan Two and configure an Input Translator (GIT file) to map the 2 keys to the controller buttons.

Ok, I’ve created the GIT file. Where do I place the GIT file?

I assigned the foot pedal to keys N and M using the Kegol footpedal software, and then plugged the footpedal into the Titan Two. I created a new Input translator. I used Keyboard mapping and set N to Button_17 and M to Button_4. I clicked the Input Translator play button, and using device manager I could verify that both keys were working.

Also: This is a Kegol Foot Switch. Here are the descriptors.

[USB DESCRIPTOR]
12 01 10 01 00 00 00 08 86 1A 26 E0 00 00 00 00 00 01 09 02 42 00 02 01 00 A0 32 09 04 00 00 01 03 01 01 00 09 21 11 01 00 01 22 D4 00 07 05 81 03 10 00 0A 09 04 01 00 02 03 01 02 00 09 21 10 01 00 01 22 29 00 07 05 82 03 08 00 0A 07 05 02 03 08 00 0A

[INTERFACE 0 HID DESCRIPTOR]
00 00 00 03 00 00 02 01 81 06 22 00 00 00 00 D4
05 01 09 06 A1 01 85 01 05 07 19 E0 29 E7 15 00 25 01 75 01 95 08 81 02 95 01 75 08 81 01 95 03 75 01 05 08 19 01 29 03 91 02 95 05 75 01 91 01 95 06 75 08 15 00 25 FF 05 07 19 00 29 FF 81 00 C0 05 01 09 02 A1 01 85 02 09 01 A1 00 05 09 19 01 29 03 15 00 25 01 95 03 75 01 81 02 95 01 75 05 81 03 05 01 09 30 09 31 09 38 15 81 25 7F 75 08 95 03 81 06 C0 C0 05 01 09 05 A1 01 85 04 09 01 A1 00 09 30 09 31 15 FF 25 01 95 02 75 02 81 02 C0 95 04 75 01 81 03 05 09 19 01 29 08 15 00 25 01 95 08 75 01 81 02 C0 05 0C 09 01 A1 01 85 03 05 01 09 81 09 82 75 01 95 02 81 02 95 06 75 01 81 03 05 0C 95 01 75 10 19 00 2A 2E 02 26 2E 02 81 00 C0

[INTERFACE 1 HID DESCRIPTOR]
00 00 00 03 00 00 02 01 81 06 22 00 00 01 00 29
06 00 FF 09 01 A1 01 09 01 15 00 26 FF 00 75 08 95 08 81 02 09 01 95 08 91 02 05 0C 09 00 15 80 25 7F 75 08 95 08 B1 02 C0

[Mad]

Ok, I’ve created the GIT file. Where do I place the GIT file?

File>Install To>Memory Slot #

Or in the toolbar "Install active work to memory slot"

[Maxxgold]

Ok, I’ve created the GIT file. Where do I place the GIT file?

File>Install To>Memory Slot #

Or in the toolbar "Install active work to memory slot"

Thank you!

[CobraKai]

How would i add a foot pedal to an existing Gtuner script, i have 3 buttons on my Elgato foot pedal I want to use.

Is this pretty easy?