TITAN ONE + Latest XIM4 FW
Moderator: antithesis
Re: TITAN ONE + Latest XIM4 FW
What's your mouse and keyboard?
-
antithesis - Colonel
- Posts: 1912
- Joined: Sat May 28, 2016 10:45 pm
Re: TITAN ONE + Latest XIM4 FW
Latest XIM firmware and T1 update. Been using a G502 mouse forever and I just got a razer Naga chroma in. Plugged it in to my current setup that works fine with G502. Causes the T1 to not work at all, connects then disconnects about 5 times then gets stuck on AU until i replug it in. Which it just repeats.
Just plugged in the G502 and it works again. Any setting i should be using on the Naga before i plug it into the XIM?
UPDATE: Now I've been getting random disconnects every couple of minutes with the G502. Been about 5 minutes with no disconnect yet though. SO idk whats going on
Just plugged in the G502 and it works again. Any setting i should be using on the Naga before i plug it into the XIM?
UPDATE: Now I've been getting random disconnects every couple of minutes with the G502. Been about 5 minutes with no disconnect yet though. SO idk whats going on
-
Da New Champ - Corporal
- Posts: 4
- Joined: Fri Jan 24, 2014 4:54 am
Re: TITAN ONE + Latest XIM4 FW
helli i habe a problem with titan one and xim 4.
i connect everything like in the discription but after a few seconds my xim beginns to flashing red and yellow... then it powers down...
anybody with same problem?
i connect everything like in the discription but after a few seconds my xim beginns to flashing red and yellow... then it powers down...
anybody with same problem?
-
frauni311 - Sergeant First Class
- Posts: 20
- Joined: Tue Mar 14, 2017 2:35 pm
Re: TITAN ONE + Latest XIM4 FW
frauni311 wrote:helli i habe a problem with titan one and xim 4.
i connect everything like in the discription but after a few seconds my xim beginns to flashing red and yellow... then it powers down... anybody with same problem?
Maybe is an power issue, please try again, but only having the controller connected on XIM4 to check.
ConsoleTuner Support Team
-
J2Kbr - General of the Army
- Posts: 20323
- Joined: Tue Mar 18, 2014 1:39 pm
Re: TITAN ONE + Latest XIM4 FW
I seem to get get AU occasionally when using the standard PS4 T1 + Xim, reconnecting the T1/Xim fixes it but can take 20 seconds or so to get back into the game. When the purple lights occur I have no control of controller or m/kb. So far I have disabled all GTuner speed up options, running latest Xim4 and T1 firmware, removed battery from DS4 controller, tried a different USB cable from controller to Xim4, plugged m/kb into a powered USB 2.0 hub. So far the issue still occurs and haven't been able to pinpoint the cause aside from the fact the it only happens with the T1 + Xim combo.
Only thing I haven't tried is "unplug / replug the Xim4 into the T1 when first booting up PS4 or it'll disconnect within 10 minutes. Do it once, no further disconnects." I'll give this a go on first boot and see if it makes a difference, thanks for all the information you provided so far Antithesis.
Only thing I haven't tried is "unplug / replug the Xim4 into the T1 when first booting up PS4 or it'll disconnect within 10 minutes. Do it once, no further disconnects." I'll give this a go on first boot and see if it makes a difference, thanks for all the information you provided so far Antithesis.
-
kryptik66 - Master Sergeant
- Posts: 26
- Joined: Fri Feb 10, 2017 9:29 pm
Re: TITAN ONE + Latest XIM4 FW
yep it seems to work if only rhe controller is connected.. but if i plug in m/k into xim it powrrs off..
edit: when i plug my elite controller into xim all wirks fine. just m/k ...
edit: when i plug my elite controller into xim all wirks fine. just m/k ...
-
frauni311 - Sergeant First Class
- Posts: 20
- Joined: Tue Mar 14, 2017 2:35 pm
Re: TITAN ONE + Latest XIM4 FW
Thanks for the info. This seems to be lack of power. An powered USB hub may help.frauni311 wrote:yep it seems to work if only rhe controller is connected.. but if i plug in m/k into xim it powrrs off..
edit: when i plug my elite controller into xim all wirks fine. just m/k ...
ConsoleTuner Support Team
-
J2Kbr - General of the Army
- Posts: 20323
- Joined: Tue Mar 18, 2014 1:39 pm
Re: TITAN ONE + Latest XIM4 FW
whats a powered usb hub? i hane one with 4 slots..
-
frauni311 - Sergeant First Class
- Posts: 20
- Joined: Tue Mar 14, 2017 2:35 pm
Re: TITAN ONE + Latest XIM4 FW
frauni311 wrote:whats a powered usb hub? i hane one with 4 slots..
powered means the USB hub have an external power supply, like this:
ConsoleTuner Support Team
-
J2Kbr - General of the Army
- Posts: 20323
- Joined: Tue Mar 18, 2014 1:39 pm
Re: TITAN ONE + Latest XIM4 FW
oke thank you very much:)
-
frauni311 - Sergeant First Class
- Posts: 20
- Joined: Tue Mar 14, 2017 2:35 pm
Return to XIM Apex, XIM4, XIM Edge with Titan devices
Who is online
Users browsing this forum: No registered users and 56 guests