Connect xim with tt2 xbox sx?
Posted: Tue Jan 04, 2022 12:06 pm
i have xim apex, tt2 and a powered switch. How can I best connect it. With the switch I have on and off button and input for power supply unit. I have tried to express myself as clearly as possible, if not I can try again, please ask
How was it before without power on the switch:
I have switch on xbox series x. I turned on the console, then turned on the switch and everything worked 2 weeks ago. Tt2 is connected to the switch and mouse, keyboard and NAV are connected to xim. Xim is connected to tt2 A USB. For 2 weeks the controller has been disconnected (presumably) and starts to blink after that I have to start everything again, sometimes even 2 times with the controller reconnected. I read a little and it said you need a powered switch. I bought it.
Now I have the problem that when I turn on XSX, I turn on a powered switch, tt2 goes on (only green led lights up on the left, nothing more) on display tt2 is flashing 0. The controller even works but tt2 doesn't.
How I help myself:
1 controller to xsx directly with cable and then disconnect cable (controller lights up)
2 controllers on xim hub and xim on XSX
3 Disconnect the power from the switch, then switch tt2 (together with apex and hub), then turn on the switch and then power to the switch.
Sometimes I'm lucky, sometimes I have to do the same 2-3 times.
It's a little chilly, and I don't know which of them are causing errors. I was about to send controllers because it did not connect to XSX 3-5 times but it worked briefly with 2 controllers, after then I had the same errors with 2 controllers. I've already tried to swap the cables.
I'm sorry for my english, i would be grateful for any help or just reeport how it attached to you
How was it before without power on the switch:
I have switch on xbox series x. I turned on the console, then turned on the switch and everything worked 2 weeks ago. Tt2 is connected to the switch and mouse, keyboard and NAV are connected to xim. Xim is connected to tt2 A USB. For 2 weeks the controller has been disconnected (presumably) and starts to blink after that I have to start everything again, sometimes even 2 times with the controller reconnected. I read a little and it said you need a powered switch. I bought it.
Now I have the problem that when I turn on XSX, I turn on a powered switch, tt2 goes on (only green led lights up on the left, nothing more) on display tt2 is flashing 0. The controller even works but tt2 doesn't.
How I help myself:
1 controller to xsx directly with cable and then disconnect cable (controller lights up)
2 controllers on xim hub and xim on XSX
3 Disconnect the power from the switch, then switch tt2 (together with apex and hub), then turn on the switch and then power to the switch.
Sometimes I'm lucky, sometimes I have to do the same 2-3 times.
It's a little chilly, and I don't know which of them are causing errors. I was about to send controllers because it did not connect to XSX 3-5 times but it worked briefly with 2 controllers, after then I had the same errors with 2 controllers. I've already tried to swap the cables.
I'm sorry for my english, i would be grateful for any help or just reeport how it attached to you