Polling how many ms ?

[MindCtrlZomB]

Hi
I am just wondering about polling rates
xbox polls at 4ms
venom-X @ 4ms
XIM4 @ 8ms
Titan1 @ 1.2ms

What does the xbox360, PS4 and ps3 poll at?.

If i run xim4 into the titan1 will it poll at 9.2ms?

I mostly use the xim4 with ps4 because the aiming is more crisp then venom-x
which is a bit square when drawing circles

[J2Kbr]

xbox one polls at 4ms)

correct.

venom-X @ 4ms)

don't know.

XIM4 @ 8ms)

XIM4 poling time is 4ms or 5ms, depending on the FW version.

Titan1 @ 1.2ms)

correct (with 1ms response time activated).

What does the xbox360, PS4 and ps3 poll at?.

Xbox 360: 4ms
PS4: 5ms (but the console polls at 4ms)
PS3: 1ms

If i run xim4 into the titan1 will it poll at 9.2ms?

The math is not as simple as a straight addition ... in practice the best approximation would be the the biggest value + half of the lowest value .... so 4 + .6 = 4.6ms (average aproximation)

[MindCtrlZomB]

ah cool nice1 dude yeah the venom-x is stated as 4ms
godjoey was saying that it is confirmed

i prefer the xim because you can set any button to the nav
were as the venom-x is fixed buttons with the nav x=x o=o L1=L1 matching the ds4
so you have to change cods button layout to "jump" and have the ds4 close by for other buttons.
And it only stores 3 ps4 profiles at a time were as xim4 is up to 22 i think

ah right somebody said obsiv was going to go to 4ms in a update but i have not seen it mentioned
i only read that the xbox360 wired controller polls at 8ms i was told thats the same as 125hz mouse polling
but i am not sure about that i dont know what the ds4 polls at or how much it makes a difference
but the ds4 has to be plugged in as it handshakes with the console constantly were as you can plug out the xbox controller
on the 360 and xb1 for up to 15mins before the xim will stop working with the console.

[J2Kbr]

ah right somebody said obsiv was going to go to 4ms in a update but i have not seen it mentioned

This is true, I talked with him last Tuesday about that, we were discussing how improve the response time when using XIM + Titan One.

i only read that the xbox360 wired controller polls at 8ms i was told thats the same as 125hz mouse polling

The xbox 360 controller has 2 USB endpoints, one for sending the user inputs, which runs at 4ms, and the other is used by the console to control the LEDs and rumble, this endpoint works at 8ms.

[MindCtrlZomB]

Ah cool thats great (o: nice1 :O)