Anti-Recoil Utility

Documentation, usage tips and configuration guides for Titan Two scripts and bytecodes published by the community users.

Re: Anti-Recoil for XIM APEX

Postby BlessUp » Mon Oct 29, 2018 2:54 pm

I cant get this to load on titan 2 whats the trick?
User avatar
BlessUp
Master Sergeant
Master Sergeant
 
Posts: 40
Joined: Fri May 22, 2015 12:18 am

Re: Anti-Recoil for XIM APEX

Postby alanmcgregor » Mon Oct 29, 2018 5:40 pm

Even though the Script is enabled by default, the recoil compensation (anti-recoil) is set to 0, so in order to add anti-recoil you can either, put a big number on the Interactive Configuration Interface and adjust from there.

On-Fly adjust, is set in very small steps:
While holding Options button = 1.0 steps
While holding TouchPad = 0.25 steps.
Fine tuning makes a HUGE difference on anti-recoil for APEX.

Meaning if you are doing it on-fly, expect adding a bunch of anti-recoil (taping D-Pad Down many times, while holding Option button down) before start to see its effects.
User avatar
alanmcgregor
Major
Major
 
Posts: 981
Joined: Tue Mar 27, 2018 8:38 am

Re: Anti-Recoil for XIM APEX

Postby Redrabbit5 » Mon Oct 29, 2018 10:40 pm

Redrabbit5 wrote:BO4 MP SETTINGS ( no sniper )

19,75 vertical antirecoil

- 1,00 horizontal antirecoil

SMG take more time for tune , and unfortunally I have no time .



If someone play Blackout try these settings , if use M&KB set 3K I use both max in game settings .
User avatar
Redrabbit5
Sergeant Major
Sergeant Major
 
Posts: 90
Joined: Fri Aug 24, 2018 5:10 pm

Re: Anti-Recoil for XIM APEX

Postby alanmcgregor » Tue Oct 30, 2018 12:47 am

Thanks to share Redrabbit5, I hope more people do the same :) :joia:
User avatar
alanmcgregor
Major
Major
 
Posts: 981
Joined: Tue Mar 27, 2018 8:38 am

Re: Anti-Recoil for XIM APEX

Postby trshy » Thu Nov 08, 2018 4:22 pm

hey alan, i have a question about stick noise-deadzone remover, when i go to device monitor it shows x axis and y axis for both left and right sticks, what should i check, right stick or left stick? and should i combine both values of x and y to get the full reset position of the deadzone?
User avatar
trshy
Sergeant First Class
Sergeant First Class
 
Posts: 20
Joined: Wed Sep 05, 2018 6:02 pm

Re: Anti-Recoil for XIM APEX

Postby bonefisher » Thu Nov 08, 2018 4:56 pm

trshy wrote:hey alan, i have a question about stick noise-deadzone remover, when i go to device monitor it shows x axis and y axis for both left and right sticks, what should i check, right stick or left stick? and should i combine both values of x and y to get the full reset position of the deadzone?

Take the highest number on any of the value left or right stick then shake the stick again to make sure then go over just a little to make sure it zero's out any time your sticks are released!
bonefisher
Lieutenant General
Lieutenant General
 
Posts: 5413
Joined: Thu Jan 29, 2015 10:49 am

Re: Anti-Recoil for XIM APEX

Postby Quiet_Clutch » Fri Nov 23, 2018 5:10 pm

Randomly when I'm playing, it will load to the 5th slot, and when I press O + up dpad or any other direction of the dpad, none of the slots change, I just cant load into any slot and I'm stuck on slot 5. I usually have to go into gtuner and reset the script. How do I fix it so i can change my slot again?
User avatar
Quiet_Clutch
Sergeant First Class
Sergeant First Class
 
Posts: 17
Joined: Fri Feb 16, 2018 5:18 pm

Re: Anti-Recoil for XIM APEX

Postby Bergman » Fri Nov 30, 2018 6:38 pm

Awesome job my man. This is by far my favorite script and I love the ability to preset 5 different weapons and change them on the fly. My only real suggestion for features would be to have the ability to add the rapid fire on/off for each slot. Otherwise :smile0203: :smile0203: :smile0202:
User avatar
Bergman
Sergeant First Class
Sergeant First Class
 
Posts: 21
Joined: Thu Aug 25, 2016 12:28 am

Re: Anti-Recoil for XIM APEX

Postby Hacksaw1942 » Sat Dec 01, 2018 3:31 pm

Looking for some help with recoil values for BO4 VAPR weapon. I cant seem to get it dialed in with Rapid Fire OFF but if I leave Rapid Fire ON its perfect as far as recoil goes but the rapid fire slows the gun down and causes stuttering. So ultimately I need to get the recoil figured out for this weapon without Rapid Fire. I am currently using RML's settings for my apex which seems to be perfect for me:
G502 12k Polling is set to 1000mhz
Titan 2 set @1000mhz
BO4 ST
XIM APEX Polling - 1000
HIP - Sync OFF, sens 68, Smoothing 3
ADS - Sync OFF, sens - 42, Smoothing 3, Boost 400.
ADS delay - 224
User avatar
Hacksaw1942
Private
Private
 
Posts: 1
Joined: Sat Dec 01, 2018 3:19 pm

Re: Anti-Recoil for XIM APEX

Postby Puinsai » Mon Jan 28, 2019 3:31 am

any update ?
PS4 PRO | XIM APEX | T2 | FW: the latest | Mon: ASUS 28" MG28UQ | Logitech G440 | Logitech G13 | SteelSeries R600 | SteelSeries Siberia 800 | DumaOS Router
User avatar
Puinsai
Sergeant
Sergeant
 
Posts: 8
Joined: Sun Jan 20, 2019 5:51 am
Location: FRENCH POLYNESIA

PreviousNext

Return to User's Script Documentation

Who is online

Users browsing this forum: Majestic-12 [Bot] and 100 guests