Anti-Recoil Utility
Re: Anti-Recoil for XIM APEX
I cant get this to load on titan 2 whats the trick?
-
BlessUp - Master Sergeant
- Posts: 40
- Joined: Fri May 22, 2015 12:18 am
Re: Anti-Recoil for XIM APEX
Even though the Script is enabled by default, the recoil compensation (anti-recoil) is set to 0, so in order to add anti-recoil you can either, put a big number on the Interactive Configuration Interface and adjust from there.
On-Fly adjust, is set in very small steps:
While holding Options button = 1.0 steps
While holding TouchPad = 0.25 steps.
Fine tuning makes a HUGE difference on anti-recoil for APEX.
Meaning if you are doing it on-fly, expect adding a bunch of anti-recoil (taping D-Pad Down many times, while holding Option button down) before start to see its effects.
On-Fly adjust, is set in very small steps:
While holding Options button = 1.0 steps
While holding TouchPad = 0.25 steps.
Fine tuning makes a HUGE difference on anti-recoil for APEX.
Meaning if you are doing it on-fly, expect adding a bunch of anti-recoil (taping D-Pad Down many times, while holding Option button down) before start to see its effects.
-
alanmcgregor - Major
- Posts: 988
- Joined: Tue Mar 27, 2018 8:38 am
Re: Anti-Recoil for XIM APEX
Redrabbit5 wrote:BO4 MP SETTINGS ( no sniper )
19,75 vertical antirecoil
- 1,00 horizontal antirecoil
SMG take more time for tune , and unfortunally I have no time .
If someone play Blackout try these settings , if use M&KB set 3K I use both max in game settings .
-
Redrabbit5 - Sergeant Major
- Posts: 90
- Joined: Fri Aug 24, 2018 5:10 pm
Re: Anti-Recoil for XIM APEX
Thanks to share Redrabbit5, I hope more people do the same
-
alanmcgregor - Major
- Posts: 988
- Joined: Tue Mar 27, 2018 8:38 am
Re: Anti-Recoil for XIM APEX
hey alan, i have a question about stick noise-deadzone remover, when i go to device monitor it shows x axis and y axis for both left and right sticks, what should i check, right stick or left stick? and should i combine both values of x and y to get the full reset position of the deadzone?
-
trshy - Sergeant First Class
- Posts: 20
- Joined: Wed Sep 05, 2018 6:02 pm
Re: Anti-Recoil for XIM APEX
trshy wrote:hey alan, i have a question about stick noise-deadzone remover, when i go to device monitor it shows x axis and y axis for both left and right sticks, what should i check, right stick or left stick? and should i combine both values of x and y to get the full reset position of the deadzone?
Take the highest number on any of the value left or right stick then shake the stick again to make sure then go over just a little to make sure it zero's out any time your sticks are released!
- bonefisher
- Lieutenant General
- Posts: 5413
- Joined: Thu Jan 29, 2015 10:49 am
Re: Anti-Recoil for XIM APEX
Randomly when I'm playing, it will load to the 5th slot, and when I press O + up dpad or any other direction of the dpad, none of the slots change, I just cant load into any slot and I'm stuck on slot 5. I usually have to go into gtuner and reset the script. How do I fix it so i can change my slot again?
-
Quiet_Clutch - Sergeant First Class
- Posts: 17
- Joined: Fri Feb 16, 2018 5:18 pm
Re: Anti-Recoil for XIM APEX
Awesome job my man. This is by far my favorite script and I love the ability to preset 5 different weapons and change them on the fly. My only real suggestion for features would be to have the ability to add the rapid fire on/off for each slot. Otherwise
-
Bergman - Sergeant First Class
- Posts: 21
- Joined: Thu Aug 25, 2016 12:28 am
Re: Anti-Recoil for XIM APEX
Looking for some help with recoil values for BO4 VAPR weapon. I cant seem to get it dialed in with Rapid Fire OFF but if I leave Rapid Fire ON its perfect as far as recoil goes but the rapid fire slows the gun down and causes stuttering. So ultimately I need to get the recoil figured out for this weapon without Rapid Fire. I am currently using RML's settings for my apex which seems to be perfect for me:
G502 12k Polling is set to 1000mhz
Titan 2 set @1000mhz
BO4 ST
XIM APEX Polling - 1000
HIP - Sync OFF, sens 68, Smoothing 3
ADS - Sync OFF, sens - 42, Smoothing 3, Boost 400.
ADS delay - 224
G502 12k Polling is set to 1000mhz
Titan 2 set @1000mhz
BO4 ST
XIM APEX Polling - 1000
HIP - Sync OFF, sens 68, Smoothing 3
ADS - Sync OFF, sens - 42, Smoothing 3, Boost 400.
ADS delay - 224
-
Hacksaw1942 - Private
- Posts: 1
- Joined: Sat Dec 01, 2018 3:19 pm
Re: Anti-Recoil for XIM APEX
any update ?
PS4 PRO | XIM APEX | T2 | FW: the latest | Mon: ASUS 28" MG28UQ | Logitech G440 | Logitech G13 | SteelSeries R600 | SteelSeries Siberia 800 | DumaOS Router
-
Puinsai - Sergeant
- Posts: 8
- Joined: Sun Jan 20, 2019 5:51 am
- Location: FRENCH POLYNESIA
Return to User's Script Documentation
Who is online
Users browsing this forum: No registered users and 130 guests