Special Anti-Recoil for XIM4 and XIM Apex
Posted: Thu May 30, 2019 8:58 am
Special AntiRecoil for XIM Devices
Features:
Titan Two LED shows:
Slot 1: Red LED
Slot 2: Green LED
Slot 3: Blue LED
Slot 4: Orange LED
--[Slot Selection On-Fly]--
Hold R3|RS Press Slot Button Release R3|RS
Where:
Slot N: BUTTON - Color LED
Slot 1: UP D-PAD - Red LED
Slot 2: DOWN D-PAD - Green LED
Slot 3: RIGHT D-PAD - Sky Blue LED
Slot 4: LEFT D-PAD - Orange LED
--[Self-Loading AntiRecoil]--
Requirements:
+ XIM Apex Only
+ For PS4: DS4 v2 only
+ Console: Turn On Vibration on controllers: PS4 - XB1.
+ Titan Two: On GTuner at the Device Configuration Section, enable FFB on Ports:
Self-Loading Anti-Recoil - Explained
Every weapon sends a Force FeedBack Value(Vibration) back to Titan Two,
We use this value, to assign a specific Anti-Recoil preset/slot.
First we define the range in which that FF Value is located, for a specific anti-recoil preset.
You should set the Minimum Force FeedBack Value and the Maximum Force FeedBack Value.
e.g.
We have a Gun which sends 25.87 Force FeedBack Value back to Titan Two.
In our script the Slot 3 has an anti-recoil slot specific for this gun (12.0)
At the Interactive Interface Configurator,
we have the Slot 3 Self-loading define the next rage by the limits
Minimum Force FeedBack Value = 24.0
Maximum Force FeedBack Value = 26.0
Min 24---25.87----Max 26
So every time we shoot a gun with a FFB Value inside this range, it will automatically load the Slot 3 which has the matching antirecoil to neutralize it.
How to Setup Self-Loading Anti-Recoil
1. Make sure you have your T2 Connected to a PC/Laptop via PROG, with GTuner open.
2. Enter into a sandbox / Practice Shooting Range / Empty Server.
3. Choose a gun in your game, shoot it and retrieve its FFB_1 value.
Go to Device Monitor Tab and look at this value:
4. At GTuner Interactive Configuration Interface, Select a Slot, then set a min FFB and max FFB, where this FFB_1 is in.
5. Now you can try different Anti-Recoil value on that slot until you have no-recoil.
From now on, when you select that gun and fire it, the Script will detect it and self-load the correct anti-recoil slot.
--[Turbo-Loot]--
Tap and Hold the Pick up button (Square|X) to auto pick loot.
--[Auto-Sniper Hold Breath]--
Most FPS games introduce the Sniper Hold Breath mechanic for steady aiming. Often this mechanic requires to hold a extra button when you are aiming down sights. With this mod you select the "extra button" for hold breath then when you Tap and Hold L2|LT that button to hold breath will be held down automatically for you, when zooming; Hold L2 |LT for regular zoom.
--[Auto-Spot]--
Enemies when shooting down sight every 5 seconds.
Mod compatible with: Battlefield 4, 1, V and Apex Legends or any game that Spot/Ping Button is: R1|RB
-+-+-+-+-[Recommended for XIM Apex]-+-+-+-+-
Set up your Titan Two and XIM APEX to 500Hz or lower for better USB sync performance.
———[ ENJOY! ]———
Do you enjoy the script? if you feel generous enough there is an option for you.
Donation Jar:
Thank you for your generous donation".
-Alan
Features:
- Special Anti-Recoil XIM4 and XIM Apex
- 4 Slots for Weapons Selectable on-fly.
- Self-Loading Anti-Recoil.
- Each slot features optional Anti-Recoil and Rapid-Fire settings.
- Turbo-Loot
- Auto Sniper Hold Breath.
- Auto Spot.
- Customizable via Interactive Configuration Interface.
Titan Two LED shows:
Slot 1: Red LED
Slot 2: Green LED
Slot 3: Blue LED
Slot 4: Orange LED
--[Slot Selection On-Fly]--
Hold R3|RS Press Slot Button Release R3|RS
Where:
Slot N: BUTTON - Color LED
Slot 1: UP D-PAD - Red LED
Slot 2: DOWN D-PAD - Green LED
Slot 3: RIGHT D-PAD - Sky Blue LED
Slot 4: LEFT D-PAD - Orange LED
--[Self-Loading AntiRecoil]--
Requirements:
+ XIM Apex Only
+ For PS4: DS4 v2 only
+ Console: Turn On Vibration on controllers: PS4 - XB1.
+ Titan Two: On GTuner at the Device Configuration Section, enable FFB on Ports:
Self-Loading Anti-Recoil - Explained
Every weapon sends a Force FeedBack Value(Vibration) back to Titan Two,
We use this value, to assign a specific Anti-Recoil preset/slot.
First we define the range in which that FF Value is located, for a specific anti-recoil preset.
You should set the Minimum Force FeedBack Value and the Maximum Force FeedBack Value.
e.g.
We have a Gun which sends 25.87 Force FeedBack Value back to Titan Two.
In our script the Slot 3 has an anti-recoil slot specific for this gun (12.0)
At the Interactive Interface Configurator,
we have the Slot 3 Self-loading define the next rage by the limits
Minimum Force FeedBack Value = 24.0
Maximum Force FeedBack Value = 26.0
Min 24---25.87----Max 26
So every time we shoot a gun with a FFB Value inside this range, it will automatically load the Slot 3 which has the matching antirecoil to neutralize it.
How to Setup Self-Loading Anti-Recoil
1. Make sure you have your T2 Connected to a PC/Laptop via PROG, with GTuner open.
2. Enter into a sandbox / Practice Shooting Range / Empty Server.
3. Choose a gun in your game, shoot it and retrieve its FFB_1 value.
Go to Device Monitor Tab and look at this value:
4. At GTuner Interactive Configuration Interface, Select a Slot, then set a min FFB and max FFB, where this FFB_1 is in.
5. Now you can try different Anti-Recoil value on that slot until you have no-recoil.
From now on, when you select that gun and fire it, the Script will detect it and self-load the correct anti-recoil slot.
--[Turbo-Loot]--
Tap and Hold the Pick up button (Square|X) to auto pick loot.
--[Auto-Sniper Hold Breath]--
Most FPS games introduce the Sniper Hold Breath mechanic for steady aiming. Often this mechanic requires to hold a extra button when you are aiming down sights. With this mod you select the "extra button" for hold breath then when you Tap and Hold L2|LT that button to hold breath will be held down automatically for you, when zooming; Hold L2 |LT for regular zoom.
--[Auto-Spot]--
Enemies when shooting down sight every 5 seconds.
Mod compatible with: Battlefield 4, 1, V and Apex Legends or any game that Spot/Ping Button is: R1|RB
-+-+-+-+-[Recommended for XIM Apex]-+-+-+-+-
Set up your Titan Two and XIM APEX to 500Hz or lower for better USB sync performance.
———[ ENJOY! ]———
Do you enjoy the script? if you feel generous enough there is an option for you.
Donation Jar:
Thank you for your generous donation".
-Alan