PUBG - PlayerUnknown's Battlegrounds - Script v2
Re: PUBG - PlayerUnknown's Battlegrounds - Script v2
Scachi wrote:Yes.
In the Interactive Configuration you can assign the default configuration to use for each slot.
The default is "Primary Weapon : Config 1", "Secondary : Config 2", "Sidearm : Config 5".
When you haven't disabled "Weapon Tracking" in "Main Settings" it works like that:
If you press the weapon change button the script tries to follow your weapon change:
When you are on primary weapon slot -> it will switch to secondary. When you are already on secondary, it will switch back to primary." Loading the assigned #Config for the new active slot in each cases.
When you are currently on "Primary Slot" that has Config 1 at the moment and now select to load "Config 3" only the primary Slot will change to settings "Config 3". The secondary will still stay on the config it has before.
So yes, if you are on primary, select Config 3 for that slot, switch then to Secondary slot and later back to Primary Slot, it will then load again "Config 3" for primary slot again.
As the script has no idea how many weapons you are carrying it will get out of sync when you press the weapon change button while only carrying one weapon.
You can avoid that by disabling the "Weapon Tracking" or selecting "Limited" mode where it Only tracks "Primary" or "Throw" for grenade/stuff throwing.
But then you are staying locked to "Primary" weapon slot all the time and need to load the Config to load/use via the button combinations when you change your weapon in-game.
Awesome! Ty again
-
johnsmith1999 - Sergeant Major
- Posts: 95
- Joined: Thu Aug 31, 2017 3:38 am
Re: PUBG - PlayerUnknown's Battlegrounds - Script v2
Hey thanks scachi for making this script
One of the best ones out i reckon !!!
Had it for a month or so now and have been messing around trying to tune it correctly
Iv managed to tune configuration #1 AKM for the red dot and it shoots straight...
And I've sat for hours trying to tune configuration #2 for the m4 4x spray and just can't figure it out
Scachi are you able to help me?
Or Does anyone on here have a set up I can try out or can they help me please?
Post a reply or send me a private message
It would be much appreciated thanks
I'm happy to help out also.
"I'm on a Xbox And Using a Controller with a Titan Two"
One of the best ones out i reckon !!!
Had it for a month or so now and have been messing around trying to tune it correctly
Iv managed to tune configuration #1 AKM for the red dot and it shoots straight...
And I've sat for hours trying to tune configuration #2 for the m4 4x spray and just can't figure it out
Scachi are you able to help me?
Or Does anyone on here have a set up I can try out or can they help me please?
Post a reply or send me a private message
It would be much appreciated thanks
I'm happy to help out also.
"I'm on a Xbox And Using a Controller with a Titan Two"
-
CiCADA3301 - Private
- Posts: 1
- Joined: Fri Jun 12, 2020 6:30 am
Re: PUBG - PlayerUnknown's Battlegrounds - Script v2
Hi Scachi,
Per conversation from other thread regarding error in scrip my configuration posted below:
GIVICFG:7101000258780D00050000010401040096010101010104020402040204020402C896012C01F427400000012C05140000012C05140000012C05140000012C05140000012C05142A2A2E2A2A2E2A2A2E2A2A2E2A2A2E00A300EB00CC00CC00A300EB00CC00CC00A300EB00CC00CC00A300EB00CC00CC00A300EB00CC00CC000104
These configuration are default without any changes. The error happens as soon as I click Save and Run.
Thank you for your help.
Per conversation from other thread regarding error in scrip my configuration posted below:
GIVICFG:7101000258780D00050000010401040096010101010104020402040204020402C896012C01F427400000012C05140000012C05140000012C05140000012C05140000012C05142A2A2E2A2A2E2A2A2E2A2A2E2A2A2E00A300EB00CC00CC00A300EB00CC00CC00A300EB00CC00CC00A300EB00CC00CC00A300EB00CC00CC000104
These configuration are default without any changes. The error happens as soon as I click Save and Run.
Thank you for your help.
-
TheSaint - Command Sergeant Major
- Posts: 148
- Joined: Sun Jun 24, 2018 1:43 pm
Re: PUBG - PlayerUnknown's Battlegrounds - Script v2
TheSaint wrote:Hi Scachi,
Per conversation from other thread regarding error in scrip my configuration posted below:
GIVICFG:7101000258780D00050000010401040096010101010104020402040204020402C896012C01F427400000012C05140000012C05140000012C05140000012C05140000012C05142A2A2E2A2A2E2A2A2E2A2A2E2A2A2E00A300EB00CC00CC00A300EB00CC00CC00A300EB00CC00CC00A300EB00CC00CC00A300EB00CC00CC000104
These configuration are default without any changes. The error happens as soon as I click Save and Run.
Thank you for your help.
Make sure to use the pugb_v2 script and not the PUBG_v2_gtiv1811beta.gpc
Only use the beta one when you have the beta gtuner software running and the beta firmware active on your T2.
Both do work fine for me.
-
Scachi - Brigadier General
- Posts: 3044
- Joined: Wed May 11, 2016 6:25 am
- Location: Germany
Re: PUBG - PlayerUnknown's Battlegrounds - Script v2
I have tried both scripts with same error (E) as soon as I click save and run. Is this a simple drag and play? Is the configuration via interactive menue the only thing I need to do? Do I need to activate differently?
-
TheSaint - Command Sergeant Major
- Posts: 148
- Joined: Sun Jun 24, 2018 1:43 pm
Re: PUBG - PlayerUnknown's Battlegrounds - Script v2
TheSaint wrote:I have tried both scripts with same error (E) as soon as I click save and run. Is this a simple drag and play? Is the configuration via interactive menue the only thing I need to do? Do I need to activate differently?
I downloaded the script via drag and drop and run the interactive configuration, pasted your settings and hit Save and Run.
I can use the script without getting (E)rror.
Is your T2 firmware updated to stable current release or beta ?
-
Scachi - Brigadier General
- Posts: 3044
- Joined: Wed May 11, 2016 6:25 am
- Location: Germany
Re: PUBG - PlayerUnknown's Battlegrounds - Script v2
T2 is up to date. Is there something in game settings I need to do?
-
TheSaint - Command Sergeant Major
- Posts: 148
- Joined: Sun Jun 24, 2018 1:43 pm
Re: PUBG - PlayerUnknown's Battlegrounds - Script v2
TheSaint wrote:T2 is up to date. Is there something in game settings I need to do?
No.. it just works for me, not throwing any E for me. I did nothing special. Just used drag and drop and use the script.
-
Scachi - Brigadier General
- Posts: 3044
- Joined: Wed May 11, 2016 6:25 am
- Location: Germany
Re: PUBG - PlayerUnknown's Battlegrounds - Script v2
https://m.imgur.com/a/nbFgOCT
The image shows error when I select this script. This error only happens with this script. No changes were made.
Any idea on what might be causing this error. T2 is patched up to date.
-
TheSaint - Command Sergeant Major
- Posts: 148
- Joined: Sun Jun 24, 2018 1:43 pm
Re: PUBG - PlayerUnknown's Battlegrounds - Script v2
hey thanks for the script! this is the first time I have used any device like the titan 2 so please go easy on me! I have tuned the config 1 for the m4a1 gun and it works perfectly, but I cant seem to work out how to get recoil control working while using rapid fire on the sks.
ive even set the recoil control on config 2 to 100 and it still isn't making any difference. the rapid fire works perfectly and shoots the sks quickly but it shoots bouncing up to the sky. am I doing something obviously wrong that anyone can help me with? like I said it is the first time ive used a titan 2 or anything like it so some guidance would be greatly appreciated. thanks
ive even set the recoil control on config 2 to 100 and it still isn't making any difference. the rapid fire works perfectly and shoots the sks quickly but it shoots bouncing up to the sky. am I doing something obviously wrong that anyone can help me with? like I said it is the first time ive used a titan 2 or anything like it so some guidance would be greatly appreciated. thanks
-
Newcowboy - Private First Class
- Posts: 3
- Joined: Mon Feb 10, 2020 7:19 pm
Return to User's Script Documentation
Who is online
Users browsing this forum: No registered users and 137 guests