The Division Script rev2
32 posts
• Page 2 of 4 • 1, 2, 3, 4
Re: The Division Script rev2
*Update* Version 1.0.2
* Fixed weapon tracking (switching back from sidearm weapon to main weapon didn't work correctly before).
* Added something like a "Quick Anti Recoil adjustment" method, works good for full-automatic weapons.
Hint: If you download a newer version of the same script and you drag it / install it on the same slot to replace the old one you can hold down the ctrl key while doing the install to keep your current settings.
To use the quick method:
You can adjust the recorded values by tuning them for each step as before or using the Interactive Configuration.
* Fixed weapon tracking (switching back from sidearm weapon to main weapon didn't work correctly before).
* Added something like a "Quick Anti Recoil adjustment" method, works good for full-automatic weapons.
Hint: If you download a newer version of the same script and you drag it / install it on the same slot to replace the old one you can hold down the ctrl key while doing the install to keep your current settings.
To use the quick method:
- As before, enter Anti Recoil Adjustment mode by holding L2 + tap Options (led will start blinking)
- New step: Hold L2 (aim) and hold L3 (left stick click) down all the time
- Now start firing (R2) and try to do your best to compensate the recoil by moving your right stick as you do normally and keep firing until the clip is empty.
- Then let go of all buttons and you are done.
- You can test it now by just hold L2 and press and hold R2 (aim & fire as normal).
If you are satisfied leave the Adjustment Mode with hold L2 + tap Options
Or repeat the recording steps 2,3,4 again.
You can adjust the recorded values by tuning them for each step as before or using the Interactive Configuration.
Last edited by Scachi on Tue Aug 21, 2018 6:50 pm, edited 1 time in total.
-
Scachi - Brigadier General
- Posts: 3044
- Joined: Wed May 11, 2016 6:25 am
- Location: Germany
Re: The Division Script rev2
*Update* Version 1.0.3
changed the anti recoil handling
Presets are available for the weapons:
Bullfrog
Bullfrog (Striker)
Caduceus SCARL
Caduceus SCARL (Striker)
House
House (Striker)
Leightweight M4
Leightweight M4 (Striker)
Urban MDR
Urban MDR (Striker)
Warlord AK
Warlord AK (Striker)
Because of a bug in GTuner you need close with clicking [ok] button and reopen the Interactive Configuration after clicking on any preset button.
changed the anti recoil handling
Presets are available for the weapons:
Bullfrog
Bullfrog (Striker)
Caduceus SCARL
Caduceus SCARL (Striker)
House
House (Striker)
Leightweight M4
Leightweight M4 (Striker)
Urban MDR
Urban MDR (Striker)
Warlord AK
Warlord AK (Striker)
Because of a bug in GTuner you need close with clicking [ok] button and reopen the Interactive Configuration after clicking on any preset button.
-
Scachi - Brigadier General
- Posts: 3044
- Joined: Wed May 11, 2016 6:25 am
- Location: Germany
Re: The Division Script rev2
Thanks Scachi! Stellar script, as usual
-
antithesis - Colonel
- Posts: 1912
- Joined: Sat May 28, 2016 10:45 pm
Re: The Division Script rev2
Thank you.
There might be some bugs to hunt as I had to reduce and change the code a bit to get space for the anti recoil recording/adjustment feature to work for as much values as possible for all three profiles while still being relative easy to use.
There might be some bugs to hunt as I had to reduce and change the code a bit to get space for the anti recoil recording/adjustment feature to work for as much values as possible for all three profiles while still being relative easy to use.
-
Scachi - Brigadier General
- Posts: 3044
- Joined: Wed May 11, 2016 6:25 am
- Location: Germany
Re: The Division Script rev2
That's an incredible feature to pack into the bytecode limit. I'll have to give it a try.
-
antithesis - Colonel
- Posts: 1912
- Joined: Sat May 28, 2016 10:45 pm
Re: The Division Script rev2
Update* Version 1.0.4
-Adjusted timings 0 and 1. Timing 0 is used for the LVOA-C
-Added a longer display time of the applied timing when in anti recoil adjustment mode so one has enough time to fire and will be able to see the number on the LED display without having to shoot blind
-Leaving anti recoil adjustment mode will no longer trigger the games inventory
Presets are available for the weapons (added LVOA-C):
Bullfrog
Bullfrog (Striker)
Caduceus SCARL
Caduceus SCARL (Striker)
House
House (Striker)
Leightweight M4
Leightweight M4 (Striker)
LVOA-C
LVOA-C (Striker)
Urban MDR
Urban MDR (Striker)
Warlord AK
Warlord AK (Striker)
Because of a bug in GTuner you need close with clicking [ok] button and reopen the Interactive Configuration after clicking on any preset button.
-Adjusted timings 0 and 1. Timing 0 is used for the LVOA-C
-Added a longer display time of the applied timing when in anti recoil adjustment mode so one has enough time to fire and will be able to see the number on the LED display without having to shoot blind
-Leaving anti recoil adjustment mode will no longer trigger the games inventory
Presets are available for the weapons (added LVOA-C):
Bullfrog
Bullfrog (Striker)
Caduceus SCARL
Caduceus SCARL (Striker)
House
House (Striker)
Leightweight M4
Leightweight M4 (Striker)
LVOA-C
LVOA-C (Striker)
Urban MDR
Urban MDR (Striker)
Warlord AK
Warlord AK (Striker)
Because of a bug in GTuner you need close with clicking [ok] button and reopen the Interactive Configuration after clicking on any preset button.
-
Scachi - Brigadier General
- Posts: 3044
- Joined: Wed May 11, 2016 6:25 am
- Location: Germany
Re: The Division Script rev2
Update* Version 1.0.5
-Added presets for weapons acr,g36,mk16 tac, p416
-Added presets for weapons acr,g36,mk16 tac, p416
-
Scachi - Brigadier General
- Posts: 3044
- Joined: Wed May 11, 2016 6:25 am
- Location: Germany
Re: The Division Script rev2
Update* Version 1.0.6
-Added presets for weapon: M60 (LMG)
- Switching profiles in-game requires now L3+R3 press >1.5sec, when it start blinking yellow let go of R3 only and hit the profile button to load: Triangle, Circle or Cross.
Changed that because it was conflicting a bit with the alternative sensitivity option and one could change the profile by accident then.
-Added presets for weapon: M60 (LMG)
- Switching profiles in-game requires now L3+R3 press >1.5sec, when it start blinking yellow let go of R3 only and hit the profile button to load: Triangle, Circle or Cross.
Changed that because it was conflicting a bit with the alternative sensitivity option and one could change the profile by accident then.
-
Scachi - Brigadier General
- Posts: 3044
- Joined: Wed May 11, 2016 6:25 am
- Location: Germany
Re: The Division Script rev2
Update* Version 1.07:
+ Added battery warning, led will blink yellow really fast when the battery level gets below 4%
+ Added autoclimb notification: blinks white/weaponslot color slowly on active autoclimb/parcour
+ Added battery warning, led will blink yellow really fast when the battery level gets below 4%
+ Added autoclimb notification: blinks white/weaponslot color slowly on active autoclimb/parcour
-
Scachi - Brigadier General
- Posts: 3044
- Joined: Wed May 11, 2016 6:25 am
- Location: Germany
Re: The Division Script rev2
[code=gpc2][/code] any scripts for the showstopper brother still cnt find one
-
Mantis213 - Corporal
- Posts: 4
- Joined: Sun Jul 29, 2018 7:24 pm
32 posts
• Page 2 of 4 • 1, 2, 3, 4
Return to User's Script Documentation
Who is online
Users browsing this forum: No registered users and 88 guests