The Division Script rev2

Documentation, usage tips and configuration guides for Titan Two scripts and bytecodes published by the community users.

Re: The Division Script rev2

Postby Scachi » Mon Sep 03, 2018 12:31 pm

Update* Version 1.0.8:
+ added preset data script/slot control/communication to be able to load a different preset in-game
You need to download from the Online Resource
the main script: "The Division rev2"
and the data script: "The Division rev2 Data"
and put them on different slots on your T2.

Configure the main scripts option "[Weapon-Data T2 Slot]" (last one in Interactive Configuration) to point to the Slot containing the data script".

Run the main script as usual.
If you want to load a different preset for you active profile hold L2+R3 for > 4 seconds.
That will switch to the data scripts slot.
Use DPAD-Up / Down to cycle through the presets, the name gets displayed via the segment display on the T2.
To write this preset to the active weaponslot hold Cross button > 500ms. The LED will blink for a short time to indicate writing.

To change the weapon use the Triangle button to be able to load a preset for a different weapon slot.
To return to the main slot hold Circle button -> 500ms
User avatar
Scachi
Brigadier General
Brigadier General
 
Posts: 3044
Joined: Wed May 11, 2016 6:25 am
Location: Germany

Re: The Division Script rev2

Postby Scachi » Thu Sep 06, 2018 4:43 pm

Update 1.0.9:
+ changed battery warning level to 12% as ps4 controller reports in 11% steps
User avatar
Scachi
Brigadier General
Brigadier General
 
Posts: 3044
Joined: Wed May 11, 2016 6:25 am
Location: Germany

Re: The Division Script rev2

Postby Scachi » Sun Sep 09, 2018 12:29 pm

Update Version 1.10:
+ fixed bug that could change anti recoil values by accident / without being in adjustment mode
User avatar
Scachi
Brigadier General
Brigadier General
 
Posts: 3044
Joined: Wed May 11, 2016 6:25 am
Location: Germany

Re: The Division Script rev2

Postby Scachi » Mon Sep 10, 2018 12:20 pm

Update Version 1.11:
+ added Autoscope/DeadEye mode to scope automatically and disable antirecoil for active deadeye stability ability
(release L2 to a value below 95% for that)
On/off configurable per Profile and Weaponslot (primary/secondary) ingame toggle: L2+DPAD_Right
User avatar
Scachi
Brigadier General
Brigadier General
 
Posts: 3044
Joined: Wed May 11, 2016 6:25 am
Location: Germany

Re: The Division Script rev2

Postby Scachi » Sat Sep 22, 2018 2:46 pm

Update Version 1.12
+ deadeye/scope settings are now read correct from IC settings and are also written back on change.
User avatar
Scachi
Brigadier General
Brigadier General
 
Posts: 3044
Joined: Wed May 11, 2016 6:25 am
Location: Germany

Re: The Division Script rev2

Postby 3TEWS » Sun Feb 17, 2019 9:29 pm

Wow, this is a completely unique approach compared to your other script. Is it safe to assume that the script will work fine on XB1, just have to make sure the correct sequence of buttons are used? Also, is there any way to possibly REM out (I know old school...lol) the option for sprint (auto climb) I know the old script was left stick down while holding L2(LT - XB1) It never failed to be sprinting and have an immediate need for L2, and this would enable auto climb by mistake; which caused an odd turning motion in game.

Thanks for continuing to improve this script.
User avatar
3TEWS
Staff Sergeant
Staff Sergeant
 
Posts: 14
Joined: Fri Feb 23, 2018 5:45 pm

Re: The Division Script rev2

Postby Scachi » Mon Feb 18, 2019 6:50 am

3TEWS wrote:Wow, this is a completely unique approach compared to your other script. Is it safe to assume that the script will work fine on XB1, just have to make sure the correct sequence of buttons are used? Also, is there any way to possibly REM out (I know old school...lol) the option for sprint (auto climb) I know the old script was left stick down while holding L2(LT - XB1) It never failed to be sprinting and have an immediate need for L2, and this would enable auto climb by mistake; which caused an odd turning motion in game.

Thanks for continuing to improve this script.

The script should work fine for xb1.

I don't understand what sprint has to do with auto climb and don't think that my previous script was doing anything on L2+left stick down. Both scripts don't have auto run/sprint. My previous one doesn't have auto-climb.

You can disable auto climb in the Interactive Configuration.
User avatar
Scachi
Brigadier General
Brigadier General
 
Posts: 3044
Joined: Wed May 11, 2016 6:25 am
Location: Germany

Re: The Division Script rev2

Postby 3TEWS » Sun Feb 24, 2019 7:26 pm

You are completely correct, somehow I have screwed up trying to learn and modify it. I completely wiped it out and started over...the new one is great, love the configuration menu. GREAT JOB!
User avatar
3TEWS
Staff Sergeant
Staff Sergeant
 
Posts: 14
Joined: Fri Feb 23, 2018 5:45 pm

Re: The Division Script rev2

Postby S13002931 » Thu May 09, 2019 10:33 am

moderation: quote removed


Hi

How to enable Auto Run ?
Kindest Regards

S13
S13002931
First Sergeant
First Sergeant
 
Posts: 55
Joined: Fri Jun 16, 2017 12:47 pm

Re: The Division Script rev2

Postby Scachi » Thu May 09, 2019 10:50 am

Whats the point of quoting all the text for a single question ? Auto Run isn't listed as a feature as this script has NO Auto Run.
User avatar
Scachi
Brigadier General
Brigadier General
 
Posts: 3044
Joined: Wed May 11, 2016 6:25 am
Location: Germany

PreviousNext

Return to User's Script Documentation

Who is online

Users browsing this forum: No registered users and 124 guests