MacroRecPlay - record and playback a macro on the fly
Re: MacroRecPlay - record and playback a macro on the fly
Hi mate - it seams like that the macro is not recording or playing correctly - i tried several times to reproduce 45 secs of action - that are not reproduced after that - is there a limit ?
I tried wireless and with wire - without succes - I have a ps4 pro -
I tried wireless and with wire - without succes - I have a ps4 pro -
-
filoogaroo - Sergeant Major
- Posts: 70
- Joined: Thu Aug 30, 2018 2:47 am
Re: MacroRecPlay - record and playback a macro on the fly
Did you do the first time configuration on the ps4 pro ?
https://www.consoletuner.com/wiki/index ... aystation4
Without this setting no script will have an effect if you are using a new ds4 controller, the one you can see the lightbar through the touchpad.
https://www.consoletuner.com/wiki/index ... aystation4
First-time Configuration
On PlayStation 4, enable wired communication:
Settings → Devices → Controllers → Communication Method: Use USB Cable.
Configure the Output Protocol of the Titan Two to USB Automatic or USB PlayStation 4.
Without this setting no script will have an effect if you are using a new ds4 controller, the one you can see the lightbar through the touchpad.
-
Scachi - Brigadier General
- Posts: 3044
- Joined: Wed May 11, 2016 6:25 am
- Location: Germany
Re: MacroRecPlay - record and playback a macro on the fly
You did use it before with success according to your post viewtopic.php?f=23&t=9745#p69852
Did you change some settings ?
You can paste the settings here so I can test it with those, maybe you found a bug.
In the interactive configuration click the first small icon in its title bar, that copies a string to your clipboard.
Paste that string here within a code tag so I can test those settings myself.
You can also check if there is a macro file created at all, it should be listed in gtuner iv's Macro Explorer.
Did you change some settings ?
You can paste the settings here so I can test it with those, maybe you found a bug.
In the interactive configuration click the first small icon in its title bar, that copies a string to your clipboard.
Paste that string here within a code tag so I can test those settings myself.
You can also check if there is a macro file created at all, it should be listed in gtuner iv's Macro Explorer.
-
Scachi - Brigadier General
- Posts: 3044
- Joined: Wed May 11, 2016 6:25 am
- Location: Germany
Re: MacroRecPlay - record and playback a macro on the fly
Looks like the new GTuner IV release or firmware introduced a new problem..
I have uploaded script version 1.0.2 to the online resource. That one should work again.
I have uploaded script version 1.0.2 to the online resource. That one should work again.
-
Scachi - Brigadier General
- Posts: 3044
- Joined: Wed May 11, 2016 6:25 am
- Location: Germany
Re: MacroRecPlay - record and playback a macro on the fly
Ok i gonna try this tonight and keep u in the loop thks again for your help
-
filoogaroo - Sergeant Major
- Posts: 70
- Joined: Thu Aug 30, 2018 2:47 am
Re: MacroRecPlay - record and playback a macro on the fly
filoogaroo wrote:Ok i gonna try this tonight and keep u in the loop thks again for your help
The previous version stopped working for me too. But 1.0.2 works for me again.
Chances are good that it will work for you too
-
Scachi - Brigadier General
- Posts: 3044
- Joined: Wed May 11, 2016 6:25 am
- Location: Germany
Re: MacroRecPlay - record and playback a macro on the fly
Hi mate i tested it and sadly it is not working properly - seams like the five first second record well but after that it is not the case
I try to reproduce a 45 secs length race - R2 is correctly reproduced - left analog stick not
I try to reproduce a 45 secs length race - R2 is correctly reproduced - left analog stick not
-
filoogaroo - Sergeant Major
- Posts: 70
- Joined: Thu Aug 30, 2018 2:47 am
Re: MacroRecPlay - record and playback a macro on the fly
Is your GTuner IV and Firmware up to date ?
Have you changed some settings in the Interactive Configuration ?
I can't reproduce this. Using the device monitor to check the input is showing that R2 & left analog stick gets recorded and played back fine. I have tested that with the default settings of the script.
I haven't tested that in-game. I'll try that later with driveclub, it's the only racing game I have.
Have you changed some settings in the Interactive Configuration ?
I can't reproduce this. Using the device monitor to check the input is showing that R2 & left analog stick gets recorded and played back fine. I have tested that with the default settings of the script.
I haven't tested that in-game. I'll try that later with driveclub, it's the only racing game I have.
-
Scachi - Brigadier General
- Posts: 3044
- Joined: Wed May 11, 2016 6:25 am
- Location: Germany
Re: MacroRecPlay - record and playback a macro on the fly
Cycle through the menu with the left stick, the recording & playback does work.
For a race/driving it looks like it is working but it isn't precise enough to drive on the track.
It may depend on the game. There might be to much random stuff happening on a racing game for the recording to play it back and let the car stay on track.
For a race/driving it looks like it is working but it isn't precise enough to drive on the track.
It may depend on the game. There might be to much random stuff happening on a racing game for the recording to play it back and let the car stay on track.
-
Scachi - Brigadier General
- Posts: 3044
- Joined: Wed May 11, 2016 6:25 am
- Location: Germany
Return to User's Script Documentation
Who is online
Users browsing this forum: No registered users and 216 guests