KB+m xb1 setup

[fredwiththehead]

I think I got it working, I had keypad in input a, mouse in input b and controller in prog, didn't work. So I swapped the mouse with controller.
Controller now in input b but now mouse is not working. Is there a step in now missing?

[Prototype]

No, there is a know issue with the INPUT-D that should be fixed soon.

[fredwiththehead]

Ah, so what do you recommend as a short term fix? USB splitter or something?

[Prototype]

The best is to wait the fix

But with a Logitech unify receiver and Logitech unify KB and M you can connect both to the same receiver.
Or you can unplug the X1 controller after the authentication i think.

[fredwiththehead]

How does​ the authentication method work? Thank you for your continued attention.

[Prototype]

When the console is powered the controller is authenticated and then allowed to be used. With a Titan it's the same you have to authenticate the Titan with an official controller and then the controller isn't needed unlike the PS4 that need an authentication every 8/10 min.

[fredwiththehead]

Ah, got ya. I'll give it a shot this evening thanks

[fredwiththehead]

You can connect your KB and M to the titan two, if the led light up in green the default mapping should work. You can try with the directional keys. But you can also use the KB and M connected to your PC whit the "KM Capture" from Gtuner IV.

When you open the keyboard mapping in the Input Translator, you create your key maps and then you can:

1. Run the GIT file, as a GPC file (F5).
2. Drag and drop the GIT blue icon in the upper left to a free slot in the device monitor to use it away from the PC.
3. Include this line in your script:

im having a problem doing this,
when i hit f5, it runs the input translator and the keypad works ok,
but no matter what way i set up the mouse, it sets them as BUTTON_5 - BUTTON_9

[fredwiththehead]

ok, figured out that once you run input translator, you can open a new GCP, go to GPC script IDE and hit play.
but it gives me this in the out put

Test and Debug: GIT file loaded for test and debug.
GPC: ----- GPC Build: bf13.gpc -----
GPC: Preprocessor started.
GPC: First-pass started.
GPC: Variables: Global: 0, Local: 0, Parameters: 0, Pointers: 0, Constants: 0, Labels: 0, Functions: 0, Combos: 0
GPC: Memory usage: Static: 0 bytes (0.00%), Dynamic: 0 bytes (0.00%)
GPC: Second-pass started.
GPC error: bf13.gpc(1): syntax error, unexpected $end ''.
GPC: GPC Build ABORTED with 0 warning(s) and 1 error(s).

i also published it online under fredwiththehead if you would care to take a look

[fredwiththehead]

Any ideas? Gave it a test and it's not recognizing my mouse movement? Think the Titan two simply doesn't support the Corsair m65?