Titan Two doesn't work?

[xXSkyWalkerXx_1]

Hey Guys,

I wanted to try my new written scripts, but sadly the Titan Two doesn't send the signals to the console...
My Script works, also when I look on "Device Monitor" everything work - but when I want to try it out on my Titan Two nothing happens...

ps. it happens with every code - also I can't update my Titan Two, when it trys to get the driver of T2 it doesn't find them

Any idea?

Thanks!
Best regards,
xXSkyWalkerXx1

[Scachi]

If you are using a ps4, do the first time configuration :
https://www.consoletuner.com/wiki/index ... aystation4

First-time Configuration

On PlayStation 4, enable wired communication:
Settings → Devices → Controllers → Communication Method: Use USB Cable.
Configure the Output Protocol of the Titan Two to USB Automatic or USB PlayStation 4.

[xXSkyWalkerXx_1]

I have done everything what I could read on https://www.consoletuner.com/wiki/index.php?id=t2:usage_guides:systems:playstation4.

I have pluged my controller via usb-cable to INPUT-B , the auth.protocoll is automatic and the polling rate is 1ms.
Have already tried the default polling-rate setting, but doesn't solved the problem.

best regards,
xXSkyWalkerXx1

[Scachi]

When the device monitor shows the correct input and output but the console is not responding to it then you should check the cable from the output port to the ps4 and the settings on the ps4 itself again, like posted above.
That is not a GTuner IV settings, that has to be done on the PS4 itself.
Just asking to make sure you did understand that correctly. Feel free to pm me for help in german language.
You can/should use the controller in Input-A. The Input-B is mentioned if you are playing crossover, like using an xbox controller on the ps4. Then you should connect the consoles controller to Input-B.

Is the LED of the OUtput Port green ?

[xXSkyWalkerXx_1]

Yes, that I forgott to say: the LEDs are green (INPUT-B & OUTPUT).

And yes, would be maybe better to communicate in german...but why not here?

[Scachi]

Your chance in getting help here is better when posting in english.

But you are right, just ask here. If you solve this issue you can write it in english how you solved this for others to help them when they have the same trouble.

Ist Dir klar das die Einstellung für die USB Kommunikation auf der PS4 einzustellen ist und nicht in GTuner IV ?

Was für einen PS4 Controller nutzt Du ?`Den mit dem Lightbar sichtbar durch das Touchpad ?

[xXSkyWalkerXx_1]

Yeah, I had the same idea...to write here in german, but post the solve in english.

[xXSkyWalkerXx_1]

Wie meinst das, dass das die USB Komm. auf der PS4 einzustellen ist? o.O
Woo? :D

Nutze den Controller einer Slim, also neueres Modell auf meiner 2013'er PS4.
Also ja, den mit der Lightbar am TouchPad.

[Scachi]

Wie meinst das, dass das die USB Komm. auf der PS4 einzustellen ist? o.O
Woo? :D

Nutze den Controller einer Slim, also neueres Modell auf meiner 2013'er PS4.
Also ja, den mit der Lightbar am TouchPad.

On PlayStation 4, enable wired communication:
Settings → Devices → Controllers → Communication Method: Use USB Cable

Auf der Playstation im Menü: Einstellungen->Geräte->Controller-> Kommunikationsmethode: USB Kabel

[xXSkyWalkerXx_1]

Hab's auch gerade bemerkt! Habe einfach auf USB umgestellt und nun funktioniert es!

SOLVE: Settings → Devices → Controllers → Communication Method: Use USB Cable