Support for additional buttons on X52 HOTAS
Posted: Thu Jan 10, 2019 10:49 am
Hi
I have recently bought a Titan Two to replace a ChronosMax Plus. I have been using the ChronosMax Plus to use a Logitech (Saitek) X52 HOTAS (standard edition, not the Pro) to replace the Xbox controller to play Elite Dangerous on Xbox.
I was able to map all buttons on the X52 to buttons or combo buttons on the Xbox controller using the ChronosMax X-Aim plug-in.
I was starting to map the X52 buttons using the Titan Two Input Translator, but not all of the buttons on the X52 are being recognised either by the Device Monitor (with X52 plugged into the A port and Xbox Controller on B port) or via KMG with X52 plugged into pc.
I'm wondering if this is due to the Titan Two not quite fully supporting the X52 at this stage?
I have grabbed the HID Descriptors (see below) for the X52 in the hope that this might help with resolving the issue?
....or is there something I'm doing wrong? I'm totally new to the Titan Two, so it could well be due to operator error.
Thanks in advance
Ian
[USB DESCRIPTOR]
12 01 00 02 00 00 00 08 A3 06 5C 07 10 01 01 02 00 01 09 02 22 00 01 01 00 80 32 09 04 00 00 01 03 00 00 00 09 21 11 01 00 01 22 77 00 07 05 81 03 10 00 0A
[STRING 1 DESCRIPTOR]
00 00 00 02 00 00 02 01 80 06 03 01 04 09 00 0E
0E 03 53 00 61 00 69 00 74 00 65 00 6B 00
[STRING 2 DESCRIPTOR]
00 00 00 02 00 00 02 01 80 06 03 02 04 09 00 42
42 03 53 00 61 00 69 00 74 00 65 00 6B 00 20 00 58 00 35 00 32 00 20 00 46 00 6C 00 69 00 67 00 68 00 74 00 20 00 43 00 6F 00 6E 00 74 00 72 00 6F 00 6C 00 20 00 53 00 79 00 73 00 74 00 65 00 6D 00
[INTERFACE 0 HID DESCRIPTOR]
00 00 00 02 00 00 02 01 81 06 22 00 00 00 00 77
05 01 09 04 A1 01 09 01 A1 00 09 30 09 31 15 00 26 FF 07 75 0B 95 02 81 02 09 35 15 00 26 FF 03 75 0A 95 01 81 02 09 32 09 33 09 34 09 36 15 00 26 FF 00 75 08 95 04 81 02 05 09 19 01 29 22 15 00 25 01 95 22 75 01 81 02 75 02 95 01 81 01 05 01 09 39 15 01 25 08 35 00 46 3B 01 66 14 00 75 04 95 01 81 42 05 05 09 24 09 26 15 00 25 0F 75 04 95 02 81 02 C0 C0
I have recently bought a Titan Two to replace a ChronosMax Plus. I have been using the ChronosMax Plus to use a Logitech (Saitek) X52 HOTAS (standard edition, not the Pro) to replace the Xbox controller to play Elite Dangerous on Xbox.
I was able to map all buttons on the X52 to buttons or combo buttons on the Xbox controller using the ChronosMax X-Aim plug-in.
I was starting to map the X52 buttons using the Titan Two Input Translator, but not all of the buttons on the X52 are being recognised either by the Device Monitor (with X52 plugged into the A port and Xbox Controller on B port) or via KMG with X52 plugged into pc.
I'm wondering if this is due to the Titan Two not quite fully supporting the X52 at this stage?
I have grabbed the HID Descriptors (see below) for the X52 in the hope that this might help with resolving the issue?
....or is there something I'm doing wrong? I'm totally new to the Titan Two, so it could well be due to operator error.
Thanks in advance
Ian
[USB DESCRIPTOR]
12 01 00 02 00 00 00 08 A3 06 5C 07 10 01 01 02 00 01 09 02 22 00 01 01 00 80 32 09 04 00 00 01 03 00 00 00 09 21 11 01 00 01 22 77 00 07 05 81 03 10 00 0A
[STRING 1 DESCRIPTOR]
00 00 00 02 00 00 02 01 80 06 03 01 04 09 00 0E
0E 03 53 00 61 00 69 00 74 00 65 00 6B 00
[STRING 2 DESCRIPTOR]
00 00 00 02 00 00 02 01 80 06 03 02 04 09 00 42
42 03 53 00 61 00 69 00 74 00 65 00 6B 00 20 00 58 00 35 00 32 00 20 00 46 00 6C 00 69 00 67 00 68 00 74 00 20 00 43 00 6F 00 6E 00 74 00 72 00 6F 00 6C 00 20 00 53 00 79 00 73 00 74 00 65 00 6D 00
[INTERFACE 0 HID DESCRIPTOR]
00 00 00 02 00 00 02 01 81 06 22 00 00 00 00 77
05 01 09 04 A1 01 09 01 A1 00 09 30 09 31 15 00 26 FF 07 75 0B 95 02 81 02 09 35 15 00 26 FF 03 75 0A 95 01 81 02 09 32 09 33 09 34 09 36 15 00 26 FF 00 75 08 95 04 81 02 05 09 19 01 29 22 15 00 25 01 95 22 75 01 81 02 75 02 95 01 81 01 05 01 09 39 15 01 25 08 35 00 46 3B 01 66 14 00 75 04 95 01 81 42 05 05 09 24 09 26 15 00 25 0F 75 04 95 02 81 02 C0 C0