T2 not working(flashes A U) Switch

Gtuner IV general support. Operation, questions, updates, feature request.

T2 not working(flashes A U) Switch

Postby Endless » Mon May 20, 2019 8:48 am

So I turned on my pc today and was getting ready to do some scripting. However, the T2 cannot see my controller. I have 2 controllers connected to my Nintendo Switch. The first is a PDP Faceoff and the second is a pro controller. It can't see either of them in the device monitor on my pc. Also, pressing buttons does nothing and I have to plug directly into the Switch to even get past the first screen. My computer has been updating and restarting several times recently so that might have something to do with it. Any ideas let me know.
User avatar
Endless
Master Sergeant
Master Sergeant
 
Posts: 38
Joined: Thu May 02, 2019 1:06 am

Re: T2 not working(flashes A U) Switch

Postby Scachi » Mon May 20, 2019 10:30 am

Did you do the first time config on the switch ?
First-time Configuration

On Nintendo Switch, enable wired communication:
System Settings → Controllers and Sensors → Check the Option: Pro Controller Wired Communication.
Configure the Output Protocol of the Titan Two to USB Automatic or USB Nintendo Switch


If you have "turn off with the console" enabled (Titan Two - Device Configuration), please try disable this option to check if it solves the issue.After a recent Switch update this setting is not working properly with the Nintendo Switch.


Regular Usage:

Connect the provided Micro-USB cable to the Titan Two USB port labeled OUTPUT;
Connect the other end of the Micro-USB cable to any available USB port on the Nintendo Switch Dock Station.

This guide seems to be missing that you have to connect your controller to the T2 Input-A or Input-B then.
User avatar
Scachi
Brigadier General
Brigadier General
 
Posts: 3044
Joined: Wed May 11, 2016 6:25 am
Location: Germany

Re: T2 not working(flashes A U) Switch

Postby Endless » Mon May 20, 2019 10:51 pm

I can't use the Device Configuration because it doesn't detect the T2. I uploaded a screenshot so you can see.
Attachments
no device.jpg
no device.jpg (242.65 KiB) Viewed 550 times
User avatar
Endless
Master Sergeant
Master Sergeant
 
Posts: 38
Joined: Thu May 02, 2019 1:06 am

Re: T2 not working(flashes A U) Switch

Postby Buffy » Tue May 21, 2019 2:29 am

Did you plug your T2 into your PC with the right port? It should be the PROG port.
ConsoleTuner Support Team || Discord || Custom Scripts
User avatar
Buffy
Lieutenant
Lieutenant
 
Posts: 422
Joined: Wed Jul 20, 2016 5:23 am

Re: T2 not working(flashes A U) Switch

Postby Endless » Tue May 21, 2019 4:15 am

Thanks, Buffy. I had the ports backward for PROG and OUTPUT. It shows up on my computer now.
User avatar
Endless
Master Sergeant
Master Sergeant
 
Posts: 38
Joined: Thu May 02, 2019 1:06 am


Return to Gtuner IV Support

Who is online

Users browsing this forum: No registered users and 114 guests