Switch/Wii Titan two Bluetooth Issues.

Gtuner IV general support. Operation, questions, updates, feature request.

Switch/Wii Titan two Bluetooth Issues.

Postby pupypup » Mon Jun 22, 2020 11:01 pm

I have been having issues getting my titan two Bluetooth module to function. Attached is what the sidebar looks like in gtuner, i have tried multiple SD cards(not including the one that came with the titan two as i accidentally corrupted it), i have formatted them and configured them, but i still come across the same issue. When i attempt to pair to the Nintendo switch, i plug my titan two in my PC via the prog port for power, and into my switch via the output port to pair. For about half a second after i plug it in, a pro controller shows up and is functional, but quickly(within less than a second) stops working, as it no longer registers a controller connected, and does not work wirelessly.

Also in my control panel, i get the error "Bluetooth Module: Device disconnection [ evt 5, err 0, info 010413 ]"

Update - i have attempted to connect it to my Nintendo Wii (not a wiiU, but i assume it works for both) and got this error;
"Bluetooth Module: Connection error [ evt 7, err 4, info a97e19a46ecc01002492564c2d434e542d30312d554300000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000198455800 ]"
Attachments
Titantwo capture.PNG
Titantwo capture.PNG (18.48 KiB) Viewed 1113 times
User avatar
pupypup
Private First Class
Private First Class
 
Posts: 3
Joined: Fri Jan 17, 2020 4:11 am

Re: Titan two bluetooth issues.

Postby J2Kbr » Thu Jul 02, 2020 1:45 pm

Based on what you described, on what relates to the Bluetooth module initialization and Micro SD-Card, are all good.

The for the first disconnection debug message (evt 5, err 0, info 010413, on Wii U) means was the Wii U (only the Wii U is supported, not the Wii. However, Wii remotes are supported) that terminated the Bluetooth connection. Normally this means the pairing link key is not valid. to fix please first disconnect all controllers from the console: System Settings → Wii Remote and Sensor Bar → Delete All Wii Remote Pairings. And then perform the pairing procedure again following the step described here:

https://www.consoletuner.com/wiki/index ... connection

Related to the second debug message (evt 7, err 4, info a97e19a46ecc01002492564c2d434e542d30312d554300, on Nintendo Switch) Means the console didn't replied for the connection request from the Titan Two. This also happens due wrong pairing. Same as suggested above, first try disconnect all controllers from the Nintendo Switch: System Settings → Controllers and Sensors → Disconnect Controllers. And then perform the pairing procedure again following the step described here:

https://www.consoletuner.com/wiki/index ... connection

thanks.
ConsoleTuner Support Team
User avatar
J2Kbr
General of the Army
General of the Army
 
Posts: 20323
Joined: Tue Mar 18, 2014 1:39 pm

Re: Titan two bluetooth issues.

Postby cerahobbes » Mon Aug 17, 2020 2:17 am

I'm having similar issues. I'm trying to pair both my joy cons with the Titan Two and I'm having the worst time. Either one or both fail to pair. These are some of the errors I'm getting.

Bluetooth Module: Device disconnection [ evt 5, err 0, info 010000 ]
Bluetooth Module: Connection error [ evt 15, err 2, info 010604 ]
Bluetooth Module: Connection error [ evt 3, err 16, info 0100093c27b5f6e00100 ]

The Titan Two is only connected to my pc at this time.
User avatar
cerahobbes
Private
Private
 
Posts: 1
Joined: Sat Aug 08, 2020 10:09 pm

Re: Titan two bluetooth issues.

Postby pupypup » Fri Aug 21, 2020 4:48 am

J2Kbr wrote:Based on what you described, on what relates to the Bluetooth module initialization and Micro SD-Card, are all good.

The for the first disconnection debug message (evt 5, err 0, info 010413, on Wii U) means was the Wii U that terminated the Bluetooth connection. Normally this means the pairing link key is not valid. to fix please first disconnect all controllers from the console: System Settings → Wii Remote and Sensor Bar → Delete All Wii Remote Pairings. And then perform the pairing procedure again following the step described here:

https://www.consoletuner.com/wiki/index ... connection

Related to the second debug message (evt 7, err 4, info a97e19a46ecc01002492564c2d434e542d30312d554300, on Nintendo Switch) Means the console didn't replied for the connection request from the Titan Two. This also happens due wrong pairing. Same as suggested above, first try disconnect all controllers from the Nintendo Switch: System Settings → Controllers and Sensors → Disconnect Controllers. And then perform the pairing procedure again following the step described here:

https://www.consoletuner.com/wiki/index ... connection

thanks.


Hey so sorry for not replying quickly, i kind of gave up and didnt check this forum for a while. That did get the switch working, which is all i really needed. the wii doesnt have a "disconnect all paired controllers" option like the wiiU does, so i guess that wont work. not a deal breaker though, i was mostly wanting to do it on the switch. So thank you.
User avatar
pupypup
Private First Class
Private First Class
 
Posts: 3
Joined: Fri Jan 17, 2020 4:11 am

Re: Titan two bluetooth issues.

Postby J2Kbr » Mon Aug 31, 2020 9:01 pm

cerahobbes wrote:I'm having similar issues. I'm trying to pair both my joy cons with the Titan Two and I'm having the worst time. Either one or both fail to pair. These are some of the errors I'm getting.

Bluetooth Module: Device disconnection [ evt 5, err 0, info 010000 ]
Bluetooth Module: Connection error [ evt 15, err 2, info 010604 ]
Bluetooth Module: Connection error [ evt 3, err 16, info 0100093c27b5f6e00100 ]

The Titan Two is only connected to my pc at this time.

Please try with the 1.08 Beta firmware:

viewtopic.php?f=2&t=15250

Scroll down until "To update Gtuner IV and the Titan Two with the beta release, proceed as the following"
ConsoleTuner Support Team
User avatar
J2Kbr
General of the Army
General of the Army
 
Posts: 20323
Joined: Tue Mar 18, 2014 1:39 pm


Return to Gtuner IV Support

Who is online

Users browsing this forum: No registered users and 34 guests