Switch/Wii Titan two Bluetooth Issues.
5 posts
• Page 1 of 1
Switch/Wii Titan two Bluetooth Issues.
I have been having issues getting my titan two Bluetooth module to function. Attached is what the sidebar looks like in gtuner, i have tried multiple SD cards(not including the one that came with the titan two as i accidentally corrupted it), i have formatted them and configured them, but i still come across the same issue. When i attempt to pair to the Nintendo switch, i plug my titan two in my PC via the prog port for power, and into my switch via the output port to pair. For about half a second after i plug it in, a pro controller shows up and is functional, but quickly(within less than a second) stops working, as it no longer registers a controller connected, and does not work wirelessly.
Also in my control panel, i get the error "Bluetooth Module: Device disconnection [ evt 5, err 0, info 010413 ]"
Update - i have attempted to connect it to my Nintendo Wii (not a wiiU, but i assume it works for both) and got this error;
"Bluetooth Module: Connection error [ evt 7, err 4, info a97e19a46ecc01002492564c2d434e542d30312d554300000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000198455800 ]"
Also in my control panel, i get the error "Bluetooth Module: Device disconnection [ evt 5, err 0, info 010413 ]"
Update - i have attempted to connect it to my Nintendo Wii (not a wiiU, but i assume it works for both) and got this error;
"Bluetooth Module: Connection error [ evt 7, err 4, info a97e19a46ecc01002492564c2d434e542d30312d554300000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000198455800 ]"
- Attachments
-
- Titantwo capture.PNG (18.48 KiB) Viewed 1114 times
-
pupypup - Private First Class
- Posts: 3
- Joined: Fri Jan 17, 2020 4:11 am
Re: Titan two bluetooth issues.
Based on what you described, on what relates to the Bluetooth module initialization and Micro SD-Card, are all good.
The for the first disconnection debug message (evt 5, err 0, info 010413, on Wii U) means was the Wii U (only the Wii U is supported, not the Wii. However, Wii remotes are supported) that terminated the Bluetooth connection. Normally this means the pairing link key is not valid. to fix please first disconnect all controllers from the console: System Settings → Wii Remote and Sensor Bar → Delete All Wii Remote Pairings. And then perform the pairing procedure again following the step described here:
https://www.consoletuner.com/wiki/index ... connection
Related to the second debug message (evt 7, err 4, info a97e19a46ecc01002492564c2d434e542d30312d554300, on Nintendo Switch) Means the console didn't replied for the connection request from the Titan Two. This also happens due wrong pairing. Same as suggested above, first try disconnect all controllers from the Nintendo Switch: System Settings → Controllers and Sensors → Disconnect Controllers. And then perform the pairing procedure again following the step described here:
https://www.consoletuner.com/wiki/index ... connection
thanks.
The for the first disconnection debug message (evt 5, err 0, info 010413, on Wii U) means was the Wii U (only the Wii U is supported, not the Wii. However, Wii remotes are supported) that terminated the Bluetooth connection. Normally this means the pairing link key is not valid. to fix please first disconnect all controllers from the console: System Settings → Wii Remote and Sensor Bar → Delete All Wii Remote Pairings. And then perform the pairing procedure again following the step described here:
https://www.consoletuner.com/wiki/index ... connection
Related to the second debug message (evt 7, err 4, info a97e19a46ecc01002492564c2d434e542d30312d554300, on Nintendo Switch) Means the console didn't replied for the connection request from the Titan Two. This also happens due wrong pairing. Same as suggested above, first try disconnect all controllers from the Nintendo Switch: System Settings → Controllers and Sensors → Disconnect Controllers. And then perform the pairing procedure again following the step described here:
https://www.consoletuner.com/wiki/index ... connection
thanks.
ConsoleTuner Support Team
-
J2Kbr - General of the Army
- Posts: 20323
- Joined: Tue Mar 18, 2014 1:39 pm
Re: Titan two bluetooth issues.
I'm having similar issues. I'm trying to pair both my joy cons with the Titan Two and I'm having the worst time. Either one or both fail to pair. These are some of the errors I'm getting.
Bluetooth Module: Device disconnection [ evt 5, err 0, info 010000 ]
Bluetooth Module: Connection error [ evt 15, err 2, info 010604 ]
Bluetooth Module: Connection error [ evt 3, err 16, info 0100093c27b5f6e00100 ]
The Titan Two is only connected to my pc at this time.
Bluetooth Module: Device disconnection [ evt 5, err 0, info 010000 ]
Bluetooth Module: Connection error [ evt 15, err 2, info 010604 ]
Bluetooth Module: Connection error [ evt 3, err 16, info 0100093c27b5f6e00100 ]
The Titan Two is only connected to my pc at this time.
-
cerahobbes - Private
- Posts: 1
- Joined: Sat Aug 08, 2020 10:09 pm
Re: Titan two bluetooth issues.
J2Kbr wrote:Based on what you described, on what relates to the Bluetooth module initialization and Micro SD-Card, are all good.
The for the first disconnection debug message (evt 5, err 0, info 010413, on Wii U) means was the Wii U that terminated the Bluetooth connection. Normally this means the pairing link key is not valid. to fix please first disconnect all controllers from the console: System Settings → Wii Remote and Sensor Bar → Delete All Wii Remote Pairings. And then perform the pairing procedure again following the step described here:
https://www.consoletuner.com/wiki/index ... connection
Related to the second debug message (evt 7, err 4, info a97e19a46ecc01002492564c2d434e542d30312d554300, on Nintendo Switch) Means the console didn't replied for the connection request from the Titan Two. This also happens due wrong pairing. Same as suggested above, first try disconnect all controllers from the Nintendo Switch: System Settings → Controllers and Sensors → Disconnect Controllers. And then perform the pairing procedure again following the step described here:
https://www.consoletuner.com/wiki/index ... connection
thanks.
Hey so sorry for not replying quickly, i kind of gave up and didnt check this forum for a while. That did get the switch working, which is all i really needed. the wii doesnt have a "disconnect all paired controllers" option like the wiiU does, so i guess that wont work. not a deal breaker though, i was mostly wanting to do it on the switch. So thank you.
-
pupypup - Private First Class
- Posts: 3
- Joined: Fri Jan 17, 2020 4:11 am
Re: Titan two bluetooth issues.
cerahobbes wrote:I'm having similar issues. I'm trying to pair both my joy cons with the Titan Two and I'm having the worst time. Either one or both fail to pair. These are some of the errors I'm getting.
Bluetooth Module: Device disconnection [ evt 5, err 0, info 010000 ]
Bluetooth Module: Connection error [ evt 15, err 2, info 010604 ]
Bluetooth Module: Connection error [ evt 3, err 16, info 0100093c27b5f6e00100 ]
The Titan Two is only connected to my pc at this time.
Please try with the 1.08 Beta firmware:
viewtopic.php?f=2&t=15250
Scroll down until "To update Gtuner IV and the Titan Two with the beta release, proceed as the following"
ConsoleTuner Support Team
-
J2Kbr - General of the Army
- Posts: 20323
- Joined: Tue Mar 18, 2014 1:39 pm
5 posts
• Page 1 of 1
Who is online
Users browsing this forum: No registered users and 90 guests