BUG/Problem in latest FW/GTuner 1.10.1.15

[Giga20]

Hi,

my Setup:
T2
Xim Apex
XSX
XSX-Controller (tested with Elite 1 too)

In the last Version of FW- and GTuner 1.10.1.12 (i believe it was .12 - not sure) everything works fine:

Apex Legends
Computer-Vision
Buffys Anti Recoil (Apex CV 1.03)
- Buffys Script "compensates" the stacking of the Anti-Recoil-Script and the Mouse-Movement

After the Update to 1.10.1.15, Buffys Anti Recoil-Compensation didnt work anymore (or at least not the same way it did befor the update).

Now, i have "jumps" while aiming left/right (while shooting).
The speed up/down is different too - which was not the case befor the update.

I tested it now with exactly the same Config (same Xim Apex Apex Legends-ST, same Xim Apex FW) - but the problem is still there...

Can you please take a look at this? There must be an change in something...

THX!

Edit: Can you please provide me a way to rollback to the "old" Version of the FW / GTuner? Because i cant play at the moment...:-(

[Mad]

Edit: Can you please provide me a way to rollback to the "old" Version of the FW / GTuner? Because i cant play at the moment...:-(

Hold the up and down arrow on the T2 and plug it in to your PC via PROG then check for updates.

[Giga20]

Edit: Can you please provide me a way to rollback to the "old" Version of the FW / GTuner? Because i cant play at the moment...:-(

Hold the up and down arrow on the T2 and plug it in to your PC via PROG then check for updates.

With that i can rollback GTuner and Firmware?

This installes the same FW again... so that isnt a solution...:-)

[J2Kbr]

To rollback to the stable firmware:

Open "Gtuner.cfg" on notepad or similar text editor;

1. set beta_tester= to false;

Code: Select all

[Advanced]
beta_tester=false

2. put the Titan Two in programming mode and update as normal.

[Giga20]

Does the latest stable support XSX & XSX-Controller?

@J2Kbr: Can you provide me the FW 1.10.1.12 and GTuner 1.10.1.12
With this Versions everything runs perfectly!

If you provide me the old version, i would do more tests and inform you about my testings.
But i changed nothing beside the update, so i am pretty sure there is a change anywhere that effects that...

[Giga20]

I tested today again - reinstalled everything.

1.10.1.12 it worked
1.10.1.15 there is the problem with CV-AR and Xim Apex

Only thing i did was updating from .12 to .15

Is nobody here from Consoletuner who can give me the install.exe for .12 and the .12 Firmware so i can reinstall this version?!?

PLEASE! I can't use my T2 at the moment because i only use it for Apex Legends...:-(

[kettenmate]

do you use the new xim apex st and the alc settings? If you use this, you need to change the deadzone to the correct value otherwise the script should not work correctly. I try to find the correct deadzone but im not able to get it atm

[Giga20]

do you use the new xim apex st and the alc settings? If you use this, you need to change the deadzone to the correct value otherwise the script should not work correctly. I try to find the correct deadzone but im not able to get it atm

I use the old ST - i dont like the new one.

As written: Only thing i changed was the update to .15 (from .12)

But it seems there is nobody willing to help me and send me the .12 installer and firmware...

I wrote a PM to J2Kbr 2 or 3 days ago - no Answer...:-(

[Giga20]

After the Update to 1.10.1.16 everything is normal again... in .15 seems to be a change or something, but anyway - it works again...

[J2Kbr]

After the Update to 1.10.1.16 everything is normal again... in .15 seems to be a change or something, but anyway - it works again...

Very happy to hear that. Maybe when you programmed rev 15 something got corrupted, then updating to rev 16 fixed the issue.

Thank you for keeping us updated.