Which Gtuner IV protocol for PS Remote Play?
7 posts
• Page 1 of 1
Which Gtuner IV protocol for PS Remote Play?
What protocol do i have to pick in order to play PC PS5 Remote Play with the T2 + XIM connected to it?
When i use a genuine PS4 gen 2 controller with the Gtuner IV PS4 Protocol, the controller will permanently send a left input which makes it impossible to play. Also no inputs are picked up from the XIM by the T2. The same setup works perfectly on PS4.
Setup:
- Titan 2 auth controller port: DS4 gen 2
- Titan 2 input port: XIM Apex with mouse + keyboard
- Titan 2 output cable connected to PC
- Titan 2 prog cable connected to PC
- Protocol: USB Playstation 4
When i use a genuine PS4 gen 2 controller with the Gtuner IV PS4 Protocol, the controller will permanently send a left input which makes it impossible to play. Also no inputs are picked up from the XIM by the T2. The same setup works perfectly on PS4.
Setup:
- Titan 2 auth controller port: DS4 gen 2
- Titan 2 input port: XIM Apex with mouse + keyboard
- Titan 2 output cable connected to PC
- Titan 2 prog cable connected to PC
- Protocol: USB Playstation 4
-
PangYa - Sergeant First Class
- Posts: 23
- Joined: Thu Dec 10, 2020 4:25 am
Re: Which Gtuner IV protocol for PS Remote Play?
PangYa wrote:What protocol do i have to pick in order to play PC PS5 Remote Play with the T2 + XIM connected to it?
When i use a genuine PS4 gen 2 controller with the Gtuner IV PS4 Protocol, the controller will permanently send a left input which makes it impossible to play. Also no inputs are picked up from the XIM by the T2. The same setup works perfectly on PS4.
Setup:
- Titan 2 auth controller port: DS4 gen 2
- Titan 2 input port: XIM Apex with mouse + keyboard
- Titan 2 output cable connected to PC
- Titan 2 prog cable connected to PC
- Protocol: USB Playstation 4
Hi
- Titan 2 output cable connected to PS5
- Protocol: USB Playstation 5
max input and autput to 250 MHZ
-
Tahsin - Sergeant Major
- Posts: 100
- Joined: Wed May 15, 2019 7:57 am
Re: Which Gtuner IV protocol for PS Remote Play?
I dont think that would work, for PS Remote Play your devices have to be connected to the PC :(
Has anyone tried that yet? XIM + T2 via Remote Play?
Has anyone tried that yet? XIM + T2 via Remote Play?
-
PangYa - Sergeant First Class
- Posts: 23
- Joined: Thu Dec 10, 2020 4:25 am
Re: Which Gtuner IV protocol for PS Remote Play?
PangYa wrote:I dont think that would work, for PS Remote Play your devices have to be connected to the PC :(
Has anyone tried that yet? XIM + T2 via Remote Play?
My Remoteplay setup :
- Titan 2 auth controller port B: xbox 360 controller
- Titan 2 input port A: XIM Apex with mouse + keyboard + DS5
- Titan 2 output cable connected to PS5
-Titan 2 Min-Max output input 250 mhz
- Titan 2 prog cable connected to PC
- Protocol: USB Playstation 5
Tested without issue but the DS5 keep disconnecting for authentification every 8 minute
-
Tahsin - Sergeant Major
- Posts: 100
- Joined: Wed May 15, 2019 7:57 am
Re: Which Gtuner IV protocol for PS Remote Play?
Try the Remote Play protocol instead. XIM APEX is working via Remote Play on PC using a DualSense or DualShock 4 V2, and on a Mac using a DualShock 4 V2.
XIM APEX has no support for the DualSense controller, yet it works, including Trigger Effects, Motion Control and Touchpad. Vibration isn't working, but it's a XIM, so you're not using the controller most of the time anyway.
Importantly, setting up Remote Play to use a local network connection with both the PS5 and PC wired results in < 1ms roundtrip pings from PC to PS5 back to PC (tested by OBsIV). So there is no additional input lag that anyone is capable of noticing, unless Remote Play is configured incorrectly.
Follow the guide I posted in the Tutorials section of the XIM forums for more info. I'll be testing Titan Two with & without XIM APEX shortly.
XIM APEX has no support for the DualSense controller, yet it works, including Trigger Effects, Motion Control and Touchpad. Vibration isn't working, but it's a XIM, so you're not using the controller most of the time anyway.
Importantly, setting up Remote Play to use a local network connection with both the PS5 and PC wired results in < 1ms roundtrip pings from PC to PS5 back to PC (tested by OBsIV). So there is no additional input lag that anyone is capable of noticing, unless Remote Play is configured incorrectly.
Follow the guide I posted in the Tutorials section of the XIM forums for more info. I'll be testing Titan Two with & without XIM APEX shortly.
-
antithesis - Colonel
- Posts: 1912
- Joined: Sat May 28, 2016 10:45 pm
Re: Which Gtuner IV protocol for PS Remote Play?
Thanks, please let me know how well the T2 works for you with Remote Play.
In the Gtuner software i didnt find a Remote Play Protocol, i assume its a typo and you meant something differently, right?
In the Gtuner software i didnt find a Remote Play Protocol, i assume its a typo and you meant something differently, right?
-
PangYa - Sergeant First Class
- Posts: 23
- Joined: Thu Dec 10, 2020 4:25 am
Re: Which Gtuner IV protocol for PS Remote Play?
antithesis wrote:Try the Remote Play protocol instead. XIM APEX is working via Remote Play on PC using a DualSense or DualShock 4 V2, and on a Mac using a DualShock 4 V2.
XIM APEX has no support for the DualSense controller, yet it works, including Trigger Effects, Motion Control and Touchpad. Vibration isn't working, but it's a XIM, so you're not using the controller most of the time anyway.
Importantly, setting up Remote Play to use a local network connection with both the PS5 and PC wired results in < 1ms roundtrip pings from PC to PS5 back to PC (tested by OBsIV). So there is no additional input lag that anyone is capable of noticing, unless Remote Play is configured incorrectly.
Follow the guide I posted in the Tutorials section of the XIM forums for more info. I'll be testing Titan Two with & without XIM APEX shortly.
Hello Mr. antithesis,
I have succesfully setup the T2 with remote play now, however I am facing a very strange new problem and maybe you have any ideas. When I execute a T2 anti recoil script via remote play together with the XIM Apex it runs completely fine. But when i use 100% the same setup and script via an alternative remote application named chiaki I face the following issue:
The recoil script will drag down the mouse the moment the left mouse button is pressed, which is perfect. However the weapon wont start to shoot the moment i press the left mouse button. Instead it takes around 200 milliseconds before the weapon also starts to fire. Single fire ADS shots are almost impossible because of that.
This only occurs when the recoil script is used. I dont use it for HIP and there I also dont have the issues. When i set the T2 to profile 0 everything works fine. Also when using remote play I dont have this issue too. I tried both 250hz and 1000hz.
Do you have any idea what this could cause?
If you want to test chiaki, I am using the latest universal gamepack v1.59 by Mad. This is the copy code:
GIVICFG:091900000000FF0004A5025F000000000000000004B004B0000000000000000004B004B0000000000000000004B004B00032003200320032003200320032003200000000000000008000000000000000000102030000214000050514000001000100014000000000000000000000000003020000000000000000000000001464
-
PangYa - Sergeant First Class
- Posts: 23
- Joined: Thu Dec 10, 2020 4:25 am
7 posts
• Page 1 of 1
Who is online
Users browsing this forum: No registered users and 97 guests