MK11
26 posts
• Page 1 of 3 • 1, 2, 3
Re: MK11
i can make a combo pack depending if i can get my other script converted to titan two
-
Relinquished - Sergeant Major
- Posts: 100
- Joined: Thu May 21, 2015 4:19 pm
Re: MK11
- Code: Select all
#pragma METAINFO("FightGames", 1, 0, "bonefisher")
bool on_off;
int Forward;
int Back;
int BUTTON;
main
{
// - STANCE TRACKING - - - - - - - - - - - - - - - - - - - - - - - - - - -
#define STANCE_RIGHT 0
#define STANCE_LEFT 1
static uint8 stance;
if(event_active(BUTTON_13) || event_active(STICK_2_X) && get_actual(STICK_2_X) >= 20.0) {
stance = STANCE_RIGHT;
goto STANCE_LIGHTBAR;
} else if(event_active(BUTTON_12) || event_active(STICK_2_X) && get_actual(STICK_2_X) <= -20.0) {
stance = STANCE_LEFT;
goto STANCE_LIGHTBAR;
if(stance || !stance) {
switch(stance) {
case STANCE_RIGHT: stance = STANCE_LEFT; break;
case STANCE_LEFT: stance = STANCE_RIGHT; break;
}
}
STANCE_LIGHTBAR:
led_reset();
switch(stance) {
case STANCE_RIGHT: Forward = BUTTON_13; Back = BUTTON_12;led_set(LED_4, -1.0, 0);led_set(LED_3, -1.0, 0); break;
case STANCE_LEFT: Forward = BUTTON_12; Back = BUTTON_13;led_set(LED_4, -1.0, 0); break;
}
}
// - BUTTON TRACKING - - - - - - - - - - - - - - - - - - - - - - - - - - -
#define BUTTON_X BUTTON_17
#define BUTTON_Y BUTTON_14
#define BUTTON_A BUTTON_16
#define BUTTON_B BUTTON_15
static uint8 button_cycle;
if(event_active(BUTTON_17)) {
button_cycle = BUTTON_X;
BUTTON = BUTTON_X;
goto BUTTON_LIGHTBAR;
} else if(event_active(BUTTON_14)) {
button_cycle = BUTTON_Y;
BUTTON = BUTTON_Y;
goto BUTTON_LIGHTBAR;
} else if(event_active(BUTTON_16)) {
button_cycle = BUTTON_A;
BUTTON = BUTTON_A;
goto BUTTON_LIGHTBAR;
} else if(event_active(BUTTON_15)) {
button_cycle = BUTTON_B;
BUTTON = BUTTON_B;
goto BUTTON_LIGHTBAR;
if(button_cycle || !button_cycle) {
switch(button_cycle) {
case BUTTON_X: button_cycle = BUTTON_Y; break;
case BUTTON_Y: button_cycle = BUTTON_A; break;
case BUTTON_A: button_cycle = BUTTON_B; break;
case BUTTON_B: button_cycle = BUTTON_X; break;
}
}
BUTTON_LIGHTBAR:
led_reset();
switch(button_cycle) {
case BUTTON_X: led_set(LED_1, -1.0, 0); break;
case BUTTON_Y: led_set(LED_2, -1.0, 0);led_set(LED_3, -1.0, 0); break;
case BUTTON_A: led_set(LED_3, -1.0, 0); break;
case BUTTON_B: led_set(LED_2, -1.0, 0); break;
}
}
if(get_actual(STICK_1_Y)<-90.0)
{
combo_run(BB);
}
else combo_stop(BB);
if(event_active(STICK_1_Y))
{
on_off = 1;
}
if(on_off == 1 && get_actual(STICK_1_Y)> 90.0)
{
combo_run(DBFB);
}
else combo_stop(DBFB);
if(get_actual(STICK_1_X)<-90.0)
{
combo_run(DBB);
}
else combo_stop(DBB);
if(get_actual(STICK_1_X)> 90.0)
{
combo_run(BFB);
}
else combo_stop(BFB);
if(event_active(BUTTON_6))combo_run(DBBRTB);
if(event_active(BUTTON_9))combo_run(FBBRTF);
if(get_actual(BUTTON))combo_run(rapid);
}
combo rapid
{
set_val(BUTTON, 100);
wait(50);
set_val(BUTTON, 0);
wait(50);
}
combo DBB
{
set_val(BUTTON_11, 100);
wait(50);wait(50);
set_val(Back, 100);
wait(50);wait(50);
set_val(BUTTON_16, 100);
wait(50);wait(200);
}
combo BFB
{
set_val(Back, 100);
wait(50);wait(50);
set_val(Forward, 100);
wait(50);wait(50);
set_val(BUTTON_17, 100);
wait(50);wait(200);
}
combo DBFB
{
/*set_val(BUTTON_14, 100);
wait(50);wait(100);
set_val(BUTTON_17, 100);
wait(50);wait(375);*/
set_val(Back, 100);
wait(50);
set_val(BUTTON_17, 100);
wait(50);wait(100);
set_val(BUTTON_14, 100);
wait(50);
set_val(BUTTON_17, 100);
wait(50);wait(50);
on_off = 0;
}
combo BB
{
set_val(Back, 100);
wait(50);wait(50);
set_val(Forward, 100);
wait(50);wait(50);
set_val(BUTTON_15, 100);
wait(50);wait(200);
}
combo DBBRTB
{
set_val(BUTTON_11, 100);
wait(50);wait(50);
set_val(Back, 100);
wait(50);wait(50);
set_val(BUTTON, 100);
wait(50);wait(200);
}
combo FBBRTF
{
set_val(Forward, 100);
wait(50);wait(50);
set_val(Back, 100);
wait(50);wait(50);
set_val(BUTTON_5, 100);
set_val(BUTTON, 100);
wait(50);wait(50);
set_val(Forward, 100);
wait(50);wait(200);
}
Here is a good example which you can put in your combo's to keep track which side your facing!
- bonefisher
- Lieutenant General
- Posts: 5413
- Joined: Thu Jan 29, 2015 10:49 am
Re: MK11
bonefisher wrote:
- Code: Select all
#pragma METAINFO("FightGames", 1, 0, "bonefisher")
bool on_off;
int Forward;
int Back;
int BUTTON;
main
{
// - STANCE TRACKING - - - - - - - - - - - - - - - - - - - - - - - - - - -
#define STANCE_RIGHT 0
#define STANCE_LEFT 1
static uint8 stance;
if(event_active(BUTTON_13) || event_active(STICK_2_X) && get_actual(STICK_2_X) >= 20.0) {
stance = STANCE_RIGHT;
goto STANCE_LIGHTBAR;
} else if(event_active(BUTTON_12) || event_active(STICK_2_X) && get_actual(STICK_2_X) <= -20.0) {
stance = STANCE_LEFT;
goto STANCE_LIGHTBAR;
if(stance || !stance) {
switch(stance) {
case STANCE_RIGHT: stance = STANCE_LEFT; break;
case STANCE_LEFT: stance = STANCE_RIGHT; break;
}
}
STANCE_LIGHTBAR:
led_reset();
switch(stance) {
case STANCE_RIGHT: Forward = BUTTON_13; Back = BUTTON_12;led_set(LED_4, -1.0, 0);led_set(LED_3, -1.0, 0); break;
case STANCE_LEFT: Forward = BUTTON_12; Back = BUTTON_13;led_set(LED_4, -1.0, 0); break;
}
}
// - BUTTON TRACKING - - - - - - - - - - - - - - - - - - - - - - - - - - -
#define BUTTON_X BUTTON_17
#define BUTTON_Y BUTTON_14
#define BUTTON_A BUTTON_16
#define BUTTON_B BUTTON_15
static uint8 button_cycle;
if(event_active(BUTTON_17)) {
button_cycle = BUTTON_X;
BUTTON = BUTTON_X;
goto BUTTON_LIGHTBAR;
} else if(event_active(BUTTON_14)) {
button_cycle = BUTTON_Y;
BUTTON = BUTTON_Y;
goto BUTTON_LIGHTBAR;
} else if(event_active(BUTTON_16)) {
button_cycle = BUTTON_A;
BUTTON = BUTTON_A;
goto BUTTON_LIGHTBAR;
} else if(event_active(BUTTON_15)) {
button_cycle = BUTTON_B;
BUTTON = BUTTON_B;
goto BUTTON_LIGHTBAR;
if(button_cycle || !button_cycle) {
switch(button_cycle) {
case BUTTON_X: button_cycle = BUTTON_Y; break;
case BUTTON_Y: button_cycle = BUTTON_A; break;
case BUTTON_A: button_cycle = BUTTON_B; break;
case BUTTON_B: button_cycle = BUTTON_X; break;
}
}
BUTTON_LIGHTBAR:
led_reset();
switch(button_cycle) {
case BUTTON_X: led_set(LED_1, -1.0, 0); break;
case BUTTON_Y: led_set(LED_2, -1.0, 0);led_set(LED_3, -1.0, 0); break;
case BUTTON_A: led_set(LED_3, -1.0, 0); break;
case BUTTON_B: led_set(LED_2, -1.0, 0); break;
}
}
if(get_actual(STICK_1_Y)<-90.0)
{
combo_run(BB);
}
else combo_stop(BB);
if(event_active(STICK_1_Y))
{
on_off = 1;
}
if(on_off == 1 && get_actual(STICK_1_Y)> 90.0)
{
combo_run(DBFB);
}
else combo_stop(DBFB);
if(get_actual(STICK_1_X)<-90.0)
{
combo_run(DBB);
}
else combo_stop(DBB);
if(get_actual(STICK_1_X)> 90.0)
{
combo_run(BFB);
}
else combo_stop(BFB);
if(event_active(BUTTON_6))combo_run(DBBRTB);
if(event_active(BUTTON_9))combo_run(FBBRTF);
if(get_actual(BUTTON))combo_run(rapid);
}
combo rapid
{
set_val(BUTTON, 100);
wait(50);
set_val(BUTTON, 0);
wait(50);
}
combo DBB
{
set_val(BUTTON_11, 100);
wait(50);wait(50);
set_val(Back, 100);
wait(50);wait(50);
set_val(BUTTON_16, 100);
wait(50);wait(200);
}
combo BFB
{
set_val(Back, 100);
wait(50);wait(50);
set_val(Forward, 100);
wait(50);wait(50);
set_val(BUTTON_17, 100);
wait(50);wait(200);
}
combo DBFB
{
/*set_val(BUTTON_14, 100);
wait(50);wait(100);
set_val(BUTTON_17, 100);
wait(50);wait(375);*/
set_val(Back, 100);
wait(50);
set_val(BUTTON_17, 100);
wait(50);wait(100);
set_val(BUTTON_14, 100);
wait(50);
set_val(BUTTON_17, 100);
wait(50);wait(50);
on_off = 0;
}
combo BB
{
set_val(Back, 100);
wait(50);wait(50);
set_val(Forward, 100);
wait(50);wait(50);
set_val(BUTTON_15, 100);
wait(50);wait(200);
}
combo DBBRTB
{
set_val(BUTTON_11, 100);
wait(50);wait(50);
set_val(Back, 100);
wait(50);wait(50);
set_val(BUTTON, 100);
wait(50);wait(200);
}
combo FBBRTF
{
set_val(Forward, 100);
wait(50);wait(50);
set_val(Back, 100);
wait(50);wait(50);
set_val(BUTTON_5, 100);
set_val(BUTTON, 100);
wait(50);wait(50);
set_val(Forward, 100);
wait(50);wait(200);
}
Here is a good example which you can put in your combo's to keep track which side your facing!
hey man you got discord so i could talk to you about some things too do with me making these combos and this script
-
Relinquished - Sergeant Major
- Posts: 100
- Joined: Thu May 21, 2015 4:19 pm
Re: MK11
Just pm me if you need help or post combo's in here and I'll transfer to script for your testing!
- bonefisher
- Lieutenant General
- Posts: 5413
- Joined: Thu Jan 29, 2015 10:49 am
Re: MK11
bonefisher wrote:Just pm me if you need help or post combo's in here and I'll transfer to script for your testing!
done my man
-
Relinquished - Sergeant Major
- Posts: 100
- Joined: Thu May 21, 2015 4:19 pm
Re: MK11
- Code: Select all
#pragma METAINFO("FightGames", 1, 0, "bonefisher")
int Forward;
int Back;
int BUTTON;
main
{
// - STANCE TRACKING - - - - - - - - - - - - - - - - - - - - - - - - - - -
#define STANCE_RIGHT 0
#define STANCE_LEFT 1
static uint8 stance;
if(event_active(BUTTON_13) || event_active(STICK_2_X) && get_actual(STICK_2_X) >= 20.0) {
stance = STANCE_RIGHT;
goto STANCE_LIGHTBAR;
} else if(event_active(BUTTON_12) || event_active(STICK_2_X) && get_actual(STICK_2_X) <= -20.0) {
stance = STANCE_LEFT;
goto STANCE_LIGHTBAR;
if(stance || !stance) {
switch(stance) {
case STANCE_RIGHT: stance = STANCE_LEFT; break;
case STANCE_LEFT: stance = STANCE_RIGHT; break;
}
}
STANCE_LIGHTBAR:
led_reset();
switch(stance) {
case STANCE_RIGHT: Forward = BUTTON_13; Back = BUTTON_12;led_set(LED_4, -1.0, 0);led_set(LED_3, -1.0, 0); break;
case STANCE_LEFT: Forward = BUTTON_12; Back = BUTTON_13;led_set(LED_4, -1.0, 0); break;
}
}
// - BUTTON TRACKING - - - - - - - - - - - - - - - - - - - - - - - - - - -
#define BUTTON_X BUTTON_17
#define BUTTON_Y BUTTON_14
#define BUTTON_A BUTTON_16
#define BUTTON_B BUTTON_15
static uint8 button_cycle;
if(event_active(BUTTON_17)) {
button_cycle = BUTTON_X;
BUTTON = BUTTON_X;
goto BUTTON_LIGHTBAR;
} else if(event_active(BUTTON_14)) {
button_cycle = BUTTON_Y;
BUTTON = BUTTON_Y;
goto BUTTON_LIGHTBAR;
} else if(event_active(BUTTON_16)) {
button_cycle = BUTTON_A;
BUTTON = BUTTON_A;
goto BUTTON_LIGHTBAR;
} else if(event_active(BUTTON_15)) {
button_cycle = BUTTON_B;
BUTTON = BUTTON_B;
goto BUTTON_LIGHTBAR;
if(button_cycle || !button_cycle) {
switch(button_cycle) {
case BUTTON_X: button_cycle = BUTTON_Y; break;
case BUTTON_Y: button_cycle = BUTTON_A; break;
case BUTTON_A: button_cycle = BUTTON_B; break;
case BUTTON_B: button_cycle = BUTTON_X; break;
}
}
BUTTON_LIGHTBAR:
led_reset();
switch(button_cycle) {
case BUTTON_X: led_set(LED_1, -1.0, 0); break;
case BUTTON_Y: led_set(LED_2, -1.0, 0);led_set(LED_3, -1.0, 0); break;
case BUTTON_A: led_set(LED_3, -1.0, 0); break;
case BUTTON_B: led_set(LED_2, -1.0, 0); break;
}
}
if(get_actual(STICK_1_Y)<-90.0)
{
combo_run(Erron);
}
else combo_stop(Erron);
if(get_actual(BUTTON))combo_run(rapid);
}
combo rapid
{
set_val(BUTTON, 100);
wait(50);
set_val(BUTTON, 0);
wait(50);
}
combo Erron
{
set_val(BUTTON_14, 100);
wait(40);wait(20);
set_val(BUTTON_17, 100);
wait(40);wait(20);
set_val(BUTTON_14, 100);
wait(40);wait(20);
set_val(BUTTON_17, 100);
wait(40);wait(20);
set_val(BUTTON_14, 100);
wait(40);wait(1100);
set_val(BUTTON_11, 100);
wait(40);wait(50);
set_val(Back, 100);
set_val(BUTTON_17, 100);
wait(40);wait(770);
set_val(Forward, 100);
set_val(BUTTON_17, 100);
wait(40);wait(50);
set_val(BUTTON_17, 100);
wait(40);wait(50);
set_val(Forward, 100);
set_val(BUTTON_17, 100);
wait(40);wait(7700);
}
Here is erron combo on right stick up! Don't forget I can put a lot of combo's just by switching and have a different option on same stick so bring on the combo's!
- bonefisher
- Lieutenant General
- Posts: 5413
- Joined: Thu Jan 29, 2015 10:49 am
Re: MK11
do you think you can implement some combos like these https://www.youtube.com/watch?v=-7Zs3oFQc6Y ideally some of the higher damage longer combos?bonefisher wrote:Just pm me if you need help or post combo's in here and I'll transfer to script for your testing!
-
Kuyl - Sergeant First Class
- Posts: 17
- Joined: Tue Jun 26, 2018 1:05 pm
Re: MK11
Kuyl wrote:do you think you can implement some combos like these https://www.youtube.com/watch?v=-7Zs3oFQc6Y ideally some of the higher damage longer combos?bonefisher wrote:Just pm me if you need help or post combo's in here and I'll transfer to script for your testing!
Yes I have done a lot of strings that long but the problem is the changes of internet connection throught the days of the week that you'll have a perfect combo put out then at the end of the week people saying it is not working. Plus there different connection that works for you perfect but for them running the first set of combos doesn't even work because different connection... I'm going to try dialing in on this for the in between times to either add or subtract for the lag of different connection to see if it works but will take weeks of testing. If it don't work to well then there might be short set combos which usually don't mess up! Just letting you know if you start building the long one's they will piss you off staying up with there tune!
- bonefisher
- Lieutenant General
- Posts: 5413
- Joined: Thu Jan 29, 2015 10:49 am
26 posts
• Page 1 of 3 • 1, 2, 3
Return to GPC2 Script Programming
Who is online
Users browsing this forum: No registered users and 128 guests