Modern Warfare MODzPACK
13 posts
• Page 1 of 2 • 1, 2
Modern Warfare MODzPACK
Hey Team,
I'm trying to use in one of my slots Bonefisher's Modern Warfare MODzPACK . I've used his stuff in the past and they are awesome, so it HAS to be operator error on my part.
I've dragged and dropped this gpc into the slot. When I go to it in-game, every time I start pressing the fire button (PS4's R1 bumper), the Titan Two displays goes back to 0. What am I doing wrong?
Also, should I be 'turning on' anything first? I've tried pressing the dpads and not sure if this is working or not. I should mention that I am using a third party CINCH controller and have some button remapping going on, but to do play tactical flipped.
Thanks,
I'm trying to use in one of my slots Bonefisher's Modern Warfare MODzPACK . I've used his stuff in the past and they are awesome, so it HAS to be operator error on my part.
I've dragged and dropped this gpc into the slot. When I go to it in-game, every time I start pressing the fire button (PS4's R1 bumper), the Titan Two displays goes back to 0. What am I doing wrong?
Also, should I be 'turning on' anything first? I've tried pressing the dpads and not sure if this is working or not. I should mention that I am using a third party CINCH controller and have some button remapping going on, but to do play tactical flipped.
Thanks,
-
Mavman82 - Sergeant First Class
- Posts: 17
- Joined: Thu Nov 16, 2017 10:34 pm
Re: Modern Warfare MODzPACK
I suggest not enable everything from the beginning, possible some mod or mods combination is causing the described behavior.
Is better start with all disabled and enabling one by one, according your needs.
Is better start with all disabled and enabling one by one, according your needs.
ConsoleTuner Support Team
-
J2Kbr - General of the Army
- Posts: 20323
- Joined: Tue Mar 18, 2014 1:39 pm
Re: Modern Warfare MODzPACK
Get your remapping done first in the input translator getting your buttons correct. Then drag and drop that over top of my script. Everything is regular default in my script so if your using R1 for fire instead of R2 then you need to flip in remappper for it to work! Also reboot everything on T2 if you made different changes with a different controller!
- bonefisher
- Lieutenant General
- Posts: 5413
- Joined: Thu Jan 29, 2015 10:49 am
Re: Modern Warfare MODzPACK
bonefisher wrote:Get your remapping done first in the input translator getting your buttons correct. Then drag and drop that over top of my script. Everything is regular default in my script so if your using R1 for fire instead of R2 then you need to flip in remappper for it to work! Also reboot everything on T2 if you made different changes with a different controller!
is it just me or is vibration missing from your dynamic rapid fire?
-
holdinweight - Sergeant First Class
- Posts: 25
- Joined: Tue May 21, 2019 3:47 pm
Re: Modern Warfare MODzPACK
Didn't notice I don't run rumble in game!
- bonefisher
- Lieutenant General
- Posts: 5413
- Joined: Thu Jan 29, 2015 10:49 am
Re: Modern Warfare MODzPACK
Go in device configurations and make sure you have FFB checked on the port your using to get rumble!
- bonefisher
- Lieutenant General
- Posts: 5413
- Joined: Thu Jan 29, 2015 10:49 am
Re: Modern Warfare MODzPACK
bonefisher wrote:Go in device configurations and make sure you have FFB checked on the port your using to get rumble!
i did. i switched scripts and they vibrate
-
holdinweight - Sergeant First Class
- Posts: 25
- Joined: Tue May 21, 2019 3:47 pm
Re: Modern Warfare MODzPACK
if i turn off rapid fire i get rumble..what is this soft rumble vs hard rumble?
-
holdinweight - Sergeant First Class
- Posts: 25
- Joined: Tue May 21, 2019 3:47 pm
Re: Modern Warfare MODzPACK
soft rumble is rapid fire off and hard rumble is rapid fire on!
- bonefisher
- Lieutenant General
- Posts: 5413
- Joined: Thu Jan 29, 2015 10:49 am
Re: Modern Warfare MODzPACK
So how do you turn on hard rumble.. I tried the directional down and trigger.. every time it takes away rumble.
-
holdinweight - Sergeant First Class
- Posts: 25
- Joined: Tue May 21, 2019 3:47 pm
13 posts
• Page 1 of 2 • 1, 2
Return to GPC2 Script Programming
Who is online
Users browsing this forum: midg3t2 and 66 guests