Battlefront 2015
4 posts
• Page 1 of 1
Battlefront 2015
Trying to find the perfect release time for perfect burst of the EE-3 and EE-4 with the game pack any help?
-
ViciousXlV - First Sergeant
- Posts: 52
- Joined: Mon Mar 11, 2019 9:16 am
Re: Battlefront 2015
In my SWBF1 script, I used for the EE-3 a hold time of 60 with a release time of 15 for perfect timing. The EE-4 was a hold of 45 and release of 15. Script name is simply SWBF1 and can be found with GTuner Pro. It has a bunch of other goodies in it like an Easy roll/jump combo, easy swap weapon timings like the two you asked about and an easy toggle on/off for the fire modes.
I hope this helped
I hope this helped
-
Greedoshotlate - First Sergeant
- Posts: 49
- Joined: Tue Jun 21, 2016 2:34 pm
Re: Battlefront 2015
Greedoshotlate wrote:In my SWBF1 script, I used for the EE-3 a hold time of 60 with a release time of 15 for perfect timing. The EE-4 was a hold of 45 and release of 15. Script name is simply SWBF1 and can be found with GTuner Pro. It has a bunch of other goodies in it like an Easy roll/jump combo, easy swap weapon timings like the two you asked about and an easy toggle on/off for the fire modes.
I hope this helped
My script was for the Titan One, I just converted it for the Titan Two. Here it is in case you have a hard time finding it.
- Code: Select all
#pragma METAINFO("SWBF1T2", 1, 0, "greedoshotlate")
#include <titanone.gph>
/*
Star Wars Battlefront V3.2 by greedoshotlate
https://www.consoletuner.com/gpclib/?s=1547
converted to the Titan Two by greedoshotlate
*/
// GPC Online Library
// swbf1.gpc
// GPC Online Library
// SWBF.gpc
// Author: Greedoshotlate with contributions from AKHUGHES90, J2Kbr, & Bonefisher. Big thanks to these guys for all their help.
//==============================================================================
// COPYRIGHT
// 2017 greedoshotlate from http://www.consoletuner.com. This Script was made and intended for http://www.Consoletuner.com & Titan 0ne ONLY,
// UNLESS written permission is given by the creator and/or copywritee.
// All rights reserved. This material may not be reproduced, displayed, modified or distributed without the express prior written permission
// of the copyright holder. For permission, contact greedoshotlate via http://www.consoletuner.com/forum
//------------------------------------------------------------------------------
// Made for Star Wars Battlefront specifically, (anti-recoil has been optimized for the EE-3.)
// -------- anything with "//" in front has been disabled, to re-enable it just remove the "//"
define ADS = PS4_L2; // L2 can be changed to L1 for flipped triggers
define FIRE_BUTTON = PS4_R2; // R2 can be changed to R1 for flipped triggers
define CROUCH = PS4_CIRCLE; // "Default" button layout is PS4_CIRCLE. "Alternate" button layout is PS4_R3.
define SWITCH = PS4_DOWN;
define LX = PS4_LX;
define LY = PS4_LY;
define RX = PS4_RX;
define RY = PS4_RY;
define JUMP = PS4_CROSS;
define UP = PS4_UP;
define DOWN = PS4_DOWN;
define LEFT = PS4_LEFT;
define RIGHT = PS4_RIGHT;
define RELOAD = PS4_SQUARE;
define ANTI_RECOIL = 27; // Change this value to compensate to the vertical recoil
define ANTI_RECOIL_LEFT = 0; // Change this value to compensate to the left
define ANTI_RECOIL_RIGHT = 4; // Change this value to compensate to the right
// Modz Specific
int InversionON = TRUE; // Set this to FALSE if you are not using look inversion enabled in the game setting. Most people are NOT using look inversion
int AntiRecoilON = FALSE; // Set this to TRUE if you want Anti-Recoil to be active hen the script is loaded.
int anti_recoil;
int anti_recoil_left;
int anti_recoil_right;
int SWITCHoNoFF;
int FIREMODE;
int ToggleAntiRecoil;
int AutoRunOnOff;
int run_flag = FALSE;
int AimAbuse;
init {
SWITCHoNoFF = get_pvar(SPVAR_1, 1, 2, 1);
FIREMODE = get_pvar(SPVAR_2, 1, 2, 1);
ToggleAntiRecoil = get_pvar(SPVAR_3, 1, 2, 1);
AutoRunOnOff = get_pvar(SPVAR_4, 1, 2, 2);
AimAbuse = get_pvar(SPVAR_5, 1, 2, 1);
}
main {
//hair trigger mod
if ( get_val(ADS) > 1 )
{
set_val(ADS, 100);
}
if ( get_val(FIRE_BUTTON) > 1 )
{
set_val(FIRE_BUTTON, 100);
}
//RapidFire On/Off Toggle. (1 Rumble indicates ON), (Zero Rumbles indicates OFF). Triangle will always turn it back on, if already on Triangle does nothing.
// /////// Up on the D-Pad will still function as an independent Toggle for On/Off capabilities if you uncomment Lines 83-87.
if (get_val(PS4_TRIANGLE)) { //Comment out lines 72-77 with "//" to disable Triangle as an On switch if you uncomment lines 83-87 to activate On/Off feature.
if (SWITCHoNoFF == 1) {
SWITCHoNoFF = 2;
set_pvar(SPVAR_1, SWITCHoNoFF);
combo_run(RumbleNotifier);
}
} //Can be changed from "UP" to any on the d-pad. Uncomment below to activate the full On/Off feature (remove "//" from the lines 83-87 below)
if (event_press(UP)) { //Up on D-pad turns off Auto Fire, Triangle turns it back on.
if (SWITCHoNoFF == 2) {
SWITCHoNoFF = 1;
set_pvar(SPVAR_1, SWITCHoNoFF);
} //else if (SWITCHoNoFF == 1) {
//SWITCHoNoFF = 2;
//set_pvar(SPVAR_1, SWITCHoNoFF);
//combo_run(RumbleNotifier);
//}
} // RapidFire Mode Selector. (1 Rumble= EE3), (2 Rumbles= EE4)
if (SWITCHoNoFF == 2 && event_press(SWITCH) && get_val(RELOAD)) {
if (FIREMODE == 2) {
FIREMODE = 1; // EE-3 Rapidfire
set_pvar(SPVAR_2, FIREMODE);
combo_run(RumbleNotifier);
} else if (FIREMODE == 1) {
FIREMODE = 2; // EE-4 Rapidfire
set_pvar(SPVAR_2, FIREMODE);
combo_run(DoubleRumbleNotifier);
}
}
if ( get_val(FIRE_BUTTON) && FIREMODE == 1 && SWITCHoNoFF == 2)
{
combo_run(EE3);
}
else if ( get_val(FIRE_BUTTON) && FIREMODE == 2 && SWITCHoNoFF == 2)
{
combo_run(EE4);
}
// Auto/Easy Roll Activates by pressing Sprint-L3 while strafing Left Or Right, just jumps if going straight (like starting a run normally)
if(event_press(PS4_L3)) {
combo_run(roll);
}
// Anti-Recoil On/Off Toggle. (1 Rumble indicates On), (Zero Rumble indicates Off).
if (get_val(LEFT) && event_press(CROUCH)) {
if (ToggleAntiRecoil == 2) {
ToggleAntiRecoil = 1;
set_pvar(SPVAR_3, ToggleAntiRecoil);
} else if (ToggleAntiRecoil == 1) {
ToggleAntiRecoil = 2;
set_pvar(SPVAR_3, ToggleAntiRecoil);
combo_run(RumbleNotifier);
}
}
if (get_val(RIGHT) && event_press(CROUCH)) {
if (AimAbuse == 2) {
AimAbuse = 1;
set_pvar(SPVAR_5, AimAbuse);
} else if (AimAbuse == 1) {
AimAbuse = 2;
set_pvar(SPVAR_5, AimAbuse);
combo_run(DoubleRumbleNotifier);
}
}
// Anti-Recoil (While ADS and Firing Only)
if (ToggleAntiRecoil == 2 && get_val(FIRE_BUTTON) && get_val(ADS)) {
combo_run(AntiRecoil);
} //Turn auto run On/Off by pressing L2 + Left on the D-Pad (1 Rumble indicates Auto Run is On), (Zero Rumble is Off)
if ((event_press(ADS) && get_val(LEFT)) || (event_press(LEFT) && get_val(ADS))) {
if (AutoRunOnOff == 1) {
AutoRunOnOff = 2;
} else if (AutoRunOnOff == 2) {
AutoRunOnOff = 1;
}
set_pvar(SPVAR_4, AutoRunOnOff);
if (AutoRunOnOff == 1) {
combo_run(RumbleNotifier);
}
}
if (AutoRunOnOff == 1 && !get_val(FIRE_BUTTON) && !get_val(ADS)) {
if(!run_flag && get_val(12) < -97) {
run_flag = TRUE;
combo_run(AutoSprint);
} else if(get_val(12) > -97) {
run_flag = FALSE;
}
}
if(AimAbuse == 2 && get_val(PS4_L2) && get_ptime(PS4_L2) > 200) {
combo_run(AimAssistAbuse);
}
}
combo RumbleNotifier {
set_rumble(RUMBLE_A, 100);
wait (300);
reset_rumble();
}
combo DoubleRumbleNotifier {
set_rumble(RUMBLE_A, 100);
wait (300);
set_rumble (RUMBLE_A, 0);
wait (300);
set_rumble(RUMBLE_A, 100);
wait (300);
reset_rumble();
}
combo TripleRumbleNotifier {
set_rumble(RUMBLE_A, 100);
wait (300);
set_rumble (RUMBLE_A, 0);
wait (300);
set_rumble(RUMBLE_A, 100);
wait (300);
set_rumble (RUMBLE_A, 0);
wait (300);
set_rumble(RUMBLE_A, 100);
wait (300);
reset_rumble();
}
combo EE4 { // Optimized Rapidfire for the EE-4, Also best for DL-18, Relby V10. (2 Rumbles indicates activation).
set_val(FIRE_BUTTON, 100);
wait (45);
set_val (FIRE_BUTTON, 0);
wait (15);
set_val (FIRE_BUTTON, 0);
}
combo EE3 { // Optimized RapidFire for the EE-3, works great for most weapons unless listed as optimized with another previous Firemode.
set_val(FIRE_BUTTON, 100); // (1 Rumble indicates activation).
wait (60);
set_val (FIRE_BUTTON,0);
wait (15);
set_val (FIRE_BUTTON,0);
}
combo roll { // Optimized for the Auto/Easy Roll feature. Activates jump after your roll.
set_val (CROUCH, 100);
wait (35);
wait (35);
set_val (CROUCH, 100);
wait (35);
wait (35);
set_val (JUMP, 100);
wait (35);
wait (35);
set_val (JUMP, 100);
wait (35);
wait (35);
}
combo AutoSprint {
set_val(8, 0);
wait(100);
set_val(8, 100);
wait(200);
}
combo AimAssistAbuse {
set_val(PS4_L2, 100);
wait(40);
set_val(PS4_L2, 0);
wait(30);
set_val(PS4_L2, 0);
}
combo AntiRecoil {
// Look Inversion Enabled
if(get_val(FIRE_BUTTON) && !AntiRecoilON && InversionON) { // Using AntiRecoilON toggle for testing and when using multiple weapons
anti_recoil = get_val(RY) - ANTI_RECOIL; // SUBTRACT anti_recoil when LOOK INVERSION is ENABLED Normally.
if(anti_recoil > 100) anti_recoil = 100;
set_val(RY, anti_recoil);
anti_recoil_left = get_val(RX) - ANTI_RECOIL_LEFT;
if(anti_recoil_left < -100) anti_recoil_left = -100;
set_val(RX, anti_recoil_left);
anti_recoil_right = get_val(RX) + ANTI_RECOIL_RIGHT;
if(anti_recoil_right > 100) anti_recoil_right = 100;
set_val(RX, anti_recoil_right);
}
}
-
Greedoshotlate - First Sergeant
- Posts: 49
- Joined: Tue Jun 21, 2016 2:34 pm
Re: Battlefront 2015
I have a few questions regarding ur script you think we can talk on discord?
-
ViciousXlV - First Sergeant
- Posts: 52
- Joined: Mon Mar 11, 2019 9:16 am
4 posts
• Page 1 of 1
Return to GPC2 Script Programming
Who is online
Users browsing this forum: No registered users and 52 guests