Splatoon 2 + Titan two
Re: Splatoon 2 + Titan two
oh shoot that's right, i keep forgetting that the switch has video recording now
-
osbor - Master Sergeant
- Posts: 41
- Joined: Sun Oct 08, 2017 12:19 am
Re: Splatoon 2 + Titan two
Can't do video, seems like I have block (-) in G13 config to myself , later i'll rebuild.
Try this 'mxyc' instead written in script.
Try this 'mxyc' instead written in script.
- Code: Select all
const uint8 mxyc[] = {
0xFF, 0x05, 0x00, 0x00, 0xFF, 0x00, 0x1E, 0x14, 0xC2, 0x14, 0xC2, 0x00,
0x60, 0x00, 0x00, 0x01, 0x15, 0x03, 0x05, 0x05, 0x80, 0x08, 0x6C, 0x0B,
0xB8, 0x0F, 0x59, 0x13, 0x48, 0x17, 0x7F, 0x1B, 0xF9, 0x20, 0xB1, 0x25,
0xA5, 0x2A, 0xD2, 0x30, 0x35, 0x35, 0xCB, 0x3B, 0x94, 0x41, 0x8C, 0x47,
0xB4, 0x4E, 0x08, 0x54, 0x88, 0x5B, 0x33
};
-
sky418 - Command Sergeant Major
- Posts: 124
- Joined: Fri Nov 25, 2016 4:28 am
Re: Splatoon 2 + Titan two
those values are...problematic, the x axis feels extremely sluggish now at slow speeds and the acceleration ramps up dramatically.
just to confirm, what mouse DPI and ingame sens are you developing with? i want to match that
just to confirm, what mouse DPI and ingame sens are you developing with? i want to match that
-
osbor - Master Sergeant
- Posts: 41
- Joined: Sun Oct 08, 2017 12:19 am
Re: Splatoon 2 + Titan two
In game - Tv Mode - Sensitivity 2 - 2.5 (now) but when it was default nothing real change.
Mouse Logitech G - 502 (8000 DPI)
T2 Device Configuration - 8000 DPI
Curve
I think you needed something like that
Make your own, there no one helps you like you want it to be
Mouse Logitech G - 502 (8000 DPI)
T2 Device Configuration - 8000 DPI
Curve
I think you needed something like that
Make your own, there no one helps you like you want it to be
-
sky418 - Command Sergeant Major
- Posts: 124
- Joined: Fri Nov 25, 2016 4:28 am
Re: Splatoon 2 + Titan two
oh! no wonder it felt weirdly slow, i was going by your earlier post and dropped down to 3000 dpi, whoops
-
osbor - Master Sergeant
- Posts: 41
- Joined: Sun Oct 08, 2017 12:19 am
Re: Splatoon 2 + Titan two
- Code: Select all
#include <switch.gph>
#include <mouse.gph>
#define MAXGX 45.0
#define DEFAULT_MMY 0.0
#define MAX_ROUND 300.0
const uint8 kmap[] = { 0xE3, 0x00, 0x29, 0x0F, 0x3A, 0x0D, 0x3B, 0x10, 0x3C, 0x02, 0x28, 0x0E, 0x52, 0x09, 0x51, 0x0A, 0x50, 0x0B, 0x4F, 0x0C, 0x1A, 0x98, 0x04, 0x97, 0x16, 0x18, 0x07, 0x17, 0x2C, 0x0F, 0x14, 0x06, 0x08, 0x03, 0x09, 0x05, 0xE1, 0x07, 0x2B, 0x0D, 0x3D, 0x01, 0x3E, 0x12, 0x3F, 0x13, 0x40, 0x14 };
const uint8 mmap[] = { 0x00, 0x15, 0x01, 0x96, 0x05, 0x04, 0x06, 0x03, 0x07, 0x10, 0x08, 0x0E };
const uint8 mxyc[] = { 0xFF, 0x00, 0x0F, 0x00, 0x80, 0x00, 0x00, 0x00, 0x02, 0x00, 0x02, 0x00, 0xFE, 0x00, 0x05, 0x0A, 0x0F, 0x14, 0x19, 0x1E, 0x23, 0x28, 0x2D, 0x32, 0x37, 0x3C, 0x41, 0x46, 0x4B, 0x50, 0x55, 0x5A, 0x5F, 0x64 };
bool y_toggle = FALSE;
fix32 mmy;
init {
keymapping(kmap);
mousemapping(mmap);
mxyconverter(mxyc);
mmy = DEFAULT_MMY;
}
main {
set_val(SWITCH_ACCZ,0.0 );
set_val(SWITCH_ACCY,0.0 );
set_val(SWITCH_GYROZ, 0.0 );
set_val(SWITCH_GYROY, 0.0 );
set_val(SWITCH_GYROX, 0.0 );
set_val(SWITCH_ACCX, 0.0);
check_rapid();
gyro_aim();
}
void check_rapid(){
if(mouse_status(MBUTTON_1))combo_run(rapid_fire);
}
combo rapid_fire {
set_val(SWITCH_ZR,100.0);
wait(38);
set_val(SWITCH_ZR,0.0);
wait(16);
set_val(SWITCH_ZR,0.0);
}
fix32 gyro_rand(){
return 0.075 - ( rand() * 0.15 );
}
void gyro_aim(){
if(event_active(SWITCH_Y)) {
y_toggle = !y_toggle;
mmy = DEFAULT_MMY;
}
if(y_toggle) {
set_val(SWITCH_Y, 100.0);
}
fix32 my = get_val(SWITCH_RY) / 100.0;
mmy = clamp( mmy + my , -MAXGX , MAXGX );
set_val(SWITCH_ACCY, MAX_ROUND / 6.0 * sin(mmy / MAXGX) );
if( abs(mmy) != MAXGX ){
set_val(SWITCH_GYROX, MAX_ROUND * sin(my) );
}
else {
set_val(GYRO_1_X,0.0);
}
set_val(SWITCH_ACCZ, abs(get_val(SWITCH_ACCY)) - 25.0 );
set_val(SWITCH_GYROZ, MAX_ROUND * sin(get_val(STICK_1_X)/100.0) * -get_val(SWITCH_ACCZ) / 25.0 + gyro_rand() );
set_val(SWITCH_GYROY, MAX_ROUND* sin(get_val(STICK_1_X)/100.0) * -get_val(SWITCH_ACCY) / 25.0 + gyro_rand() );
set_val(SWITCH_ACCX, 0.0 );
set_val(SWITCH_RY, 0.0);
set_val(SWITCH_RX, 0.0);
}
Last edited by nspl on Tue Sep 18, 2018 12:57 pm, edited 1 time in total.
-
nspl - Corporal
- Posts: 5
- Joined: Wed May 09, 2018 2:58 pm
Re: Splatoon 2 + Titan two
Are there any news on the x/y mouse to gyro 1:1 translation? I've tried the above script from @nspl and it works really weird. Not sure what other settings are needed to make it work properly.
The default translator which doesn't use motion controls works pretty good, but the max speed of turns/aim is limited in this mode.
I didn't try the GPC from @sky418 yet, seems to require a lot of manual remappings/editing, also it seems to work for Y only using gyro, so will not help with quick 180 turns in game.
Titan Two is great, was very easy to set up and use. I've already coded a small improvement for Splatoon 2 which provides stealth movement underwater while holding Shift key (map Shift or whatever key you want to BUTTON_20, rapid fire toggle is mapped to BUTTON_21, will add auto jump and auto hide from sky418 script later): https://pastebin.com/raw/HMZh0Nbq.
Diagonal moves in stealth mode require less input value than straight moves, the above script handles it well.
The default translator which doesn't use motion controls works pretty good, but the max speed of turns/aim is limited in this mode.
I didn't try the GPC from @sky418 yet, seems to require a lot of manual remappings/editing, also it seems to work for Y only using gyro, so will not help with quick 180 turns in game.
Titan Two is great, was very easy to set up and use. I've already coded a small improvement for Splatoon 2 which provides stealth movement underwater while holding Shift key (map Shift or whatever key you want to BUTTON_20, rapid fire toggle is mapped to BUTTON_21, will add auto jump and auto hide from sky418 script later): https://pastebin.com/raw/HMZh0Nbq.
Diagonal moves in stealth mode require less input value than straight moves, the above script handles it well.
-
CrazyCoder - Corporal
- Posts: 4
- Joined: Thu Sep 13, 2018 11:13 am
Re: Splatoon 2 + Titan two
Welcome to our forums and thank you for your support.
Nice work, if possible please publish your script on Gtuner's Online Resources (tools -> Publish), it will be a great addition to our library.
CrazyCoder wrote:I've already coded a small improvement for Splatoon 2 which provides stealth movement underwater while holding Shift key (map Shift or whatever key you want to BUTTON_20, rapid fire toggle is mapped to BUTTON_21, will add auto jump and auto hide from sky418 script later): https://pastebin.com/raw/HMZh0Nbq. Diagonal moves in stealth mode require less input value than straight moves, the above script handles it well.
Nice work, if possible please publish your script on Gtuner's Online Resources (tools -> Publish), it will be a great addition to our library.
ConsoleTuner Support Team
-
J2Kbr - General of the Army
- Posts: 20323
- Joined: Tue Mar 18, 2014 1:39 pm
Re: Splatoon 2 + Titan two
・ジャイロ機能付きコントローラーは接続していない状態で使ってください
Please disconnect gyro controller before using
・もし視点が上下する時はYボタン(視点リセット)を連打してください
If camera automatically moves up and down. Please press Y button(Reset camera) several times
Please disconnect gyro controller before using
・もし視点が上下する時はYボタン(視点リセット)を連打してください
If camera automatically moves up and down. Please press Y button(Reset camera) several times
- Code: Select all
#include <switch.gph>
#include <mouse.gph>
#define MAXGX 45.0
#define DEFAULT_MMY 0.0
#define MAX_ROUND 300.0
// GIVMXYF:FF000F008000000002000200FE00050A0F14191E23282D32373C41464B50555A5F64
const uint8 mxyc[] = { 0xFF, 0x00, 0x0F, 0x00, 0x80, 0x00, 0x00, 0x00, 0x02, 0x00, 0x02, 0x00, 0xFE, 0x00, 0x05, 0x0A, 0x0F, 0x14, 0x19, 0x1E, 0x23, 0x28, 0x2D, 0x32, 0x37, 0x3C, 0x41, 0x46, 0x4B, 0x50, 0x55, 0x5A, 0x5F, 0x64 };
bool y_toggle = FALSE;
fix32 mmy;
init {
mxyconverter(mxyc);
mmy = DEFAULT_MMY;
}
main {
set_val(SWITCH_ACCZ,0.0 );
set_val(SWITCH_ACCY,0.0 );
set_val(SWITCH_GYROZ, 0.0 );
set_val(SWITCH_GYROY, 0.0 );
set_val(SWITCH_GYROX, 0.0 );
set_val(SWITCH_ACCX, 0.0);
gyro_aim();
}
fix32 gyro_rand(){
return 0.075 - ( rand() * 0.15 );
}
void gyro_aim(){
if(event_active(SWITCH_Y)) {
y_toggle = !y_toggle;
mmy = DEFAULT_MMY;
}
if(y_toggle) {
set_val(SWITCH_Y, 100.0);
}
fix32 my = get_val(SWITCH_RY) / 100.0;
mmy = clamp( mmy + my , -MAXGX , MAXGX );
set_val(SWITCH_ACCY, MAX_ROUND / 6.0 * sin(mmy / MAXGX) );
if( abs(mmy) != MAXGX ){
set_val(SWITCH_GYROX, MAX_ROUND * sin(my) );
}
else {
set_val(GYRO_1_X,0.0);
}
set_val(SWITCH_ACCZ, abs(get_val(SWITCH_ACCY)) - 25.0 );
set_val(SWITCH_GYROZ, MAX_ROUND * sin(get_val(STICK_1_X)/100.0) * -get_val(SWITCH_ACCZ) / 25.0 + gyro_rand() );
set_val(SWITCH_GYROY, MAX_ROUND* sin(get_val(STICK_1_X)/100.0) * -get_val(SWITCH_ACCY) / 25.0 + gyro_rand() );
set_val(SWITCH_ACCX, 0.0 );
set_val(SWITCH_RY, 0.0);
set_val(SWITCH_RX, 0.0);
}
Last edited by nspl on Fri Sep 28, 2018 11:52 pm, edited 2 times in total.
-
nspl - Corporal
- Posts: 5
- Joined: Wed May 09, 2018 2:58 pm
Re: Splatoon 2 + Titan two
Thanks, @nspl!
I've got it working. If you are using the input translator, Mouse XY Converter settings must be reset to the defaults for the above script to work correctly (the GPC script has its own mouse translation). Also disconnect any joysticks from the Titan, otherwise they will send random values for X/Y axis even if the stick is slightly decentered, it will screw up the gyro aim code and the aim will constantly drift.
It works much better than the stock input translator, allowing fast turns and moves.
I've got it working. If you are using the input translator, Mouse XY Converter settings must be reset to the defaults for the above script to work correctly (the GPC script has its own mouse translation). Also disconnect any joysticks from the Titan, otherwise they will send random values for X/Y axis even if the stick is slightly decentered, it will screw up the gyro aim code and the aim will constantly drift.
It works much better than the stock input translator, allowing fast turns and moves.
-
CrazyCoder - Corporal
- Posts: 4
- Joined: Thu Sep 13, 2018 11:13 am
Return to GPC2 Script Programming
Who is online
Users browsing this forum: No registered users and 74 guests